And the lab tests since they are routinely checked.
MESO-Rx
Anabolic Steroids
Musclefactorylabs
- Thread starter Gettinbig
- Start date
And the lab tests since they are routinely checked.
Hey thanks for your interest in our business! I'm Ricky, owner of this ugl, and I'll be helping out with answering any questions you guys may have.
Due to the nature of our business, the mass spec reports aren't printed out otherwise they'd be recorded in the system. BUT! I'll see what I can do get a copy of the most recent report for you guys. In the mean time, we have had our products tested by a trustworthy third party member on AnabolicSteroidForum and IronMagazineForum.
I'm a little skeptical about posting up pictures of our equipment on an open board... but I want you guys to be confident that what we say is 100% honest. I'll work something out really soon and see if I can post pics of it.
Paying for equipment isn't much and I believe EVERY ugl should have at least an autoclave to protect the customer. If we pay over $5000 in raws, what's $1000 or $2000 for a decent autoclave?
Sincerely,
Ricky
Due to the nature of our business, the mass spec reports aren't printed out otherwise they'd be recorded in the system. BUT! I'll see what I can do get a copy of the most recent report for you guys. In the mean time, we have had our products tested by a trustworthy third party member on AnabolicSteroidForum and IronMagazineForum.
I'm a little skeptical about posting up pictures of our equipment on an open board... but I want you guys to be confident that what we say is 100% honest. I'll work something out really soon and see if I can post pics of it.
Paying for equipment isn't much and I believe EVERY ugl should have at least an autoclave to protect the customer. If we pay over $5000 in raws, what's $1000 or $2000 for a decent autoclave?
Sincerely,
Ricky
Hi Ricky,
Just to clarify. So you don't send out your gear to be tested ? You do it with your own mass spec equipment ?
Also I know you want me to check your tests on other boards but we don't trust other boards here honestly. Also I am lazy and I am sure your potential customers don't want to jump through this hoop.
I understand your trepidation with posting pics. It won't be a proprietary secret your giving away since there are plenty of pics on Google of setups.
Also if you avoid things like your personal mail next to your say autoclave you should be fine. We don't need serial numbers obviously either. You take pics of your steroids why not your equipment and FULL setup ?
You have to understand sources have come and gone here and we need to ensure it's not the same equipment and actually verify you have decent equipment. I've personally had a few infections. Lasted several weeks. Very annoying.
Please post a paper with your handle with the pics. Please no photoshop and no 5k size files so I can verify the authenticity of the pic.
I am not trying to be an asshole or give you a hard time but we are injecting this in our bodies and Meso has had many issues lately and we need to raise the bar here.
I truly want you to make it here. You will find the traffic of this board dwarfs most of the boards your already on.
We send out our raws to get tested by a third party. We don't do this all the time since it's costly and we need to keep costs low to pass the savings on to you guys. But we do send it out specially when and if we receive anything new.
I completely understand. We're dealing with things which could potentially kill and you guys have every right to thoroughly check us out and I'll do my best to answer everything.
As for the pic, I'll try and get one of our autoclave first as it's the most important one. I want to be transparent as possible with you, but I can't guarantee I can post everything as it could be used against me if LE pieces it together... I hope you understand.
Ricky
Meeting you through posting in this(its not yours) thread is a bit impersonal and the pleasure isn't mine and you'll soon express your displeasure in making my acquaintance.
Your objections to what the young man is asking of you are ridiculous. Your responses seem to allude to your running things by your legal department? Knock it off, stupid, Dealer is a polite and seemingly bright young man that will entertain your fucking nonsensical replies . I will not. I've decided to make it my place to interject what you will do or you will find an asterisk following each post you or anyone representing your bullshit operation reminding everyone of what you failed to comply with.
Maybe try that. Compliance. The young man(dealer) is making polite requests. Take them as orders...demands if you will. Like the demands your pappy used to make to you, boy. Nothing is free in this world. Your claiming to own this Mickey Mouse operation and not cooperating and thinking you are going to get a free ride here is miscalculation on your part. You don't like it? Move the fuck on. You care to challenge my authority, be my guest. It will be the cyper equivalent of me putting you over my knee. Get with the program.
Last edited:
Candyskull
New Member
Personally, I'd very much like a picture of that laminar hood as I see you owning that as the most likely thing to be bullshit. A cash purchase of an autoclave off craigslist from a tattoo parlor gone belly up is quite possible. The laminar hood I see as the least likely thing for you to actually own, so it would increase my trust in you quite a lot to see that item in particular. Along with the above mentioned paper with your username and a date of course.
Ok so you send it to a third party but they don't send you or email you results ? Usually results come in the form of a document whether .pdf or whatever. You can edit out identifying information once again.
I am not sure how a few pics will lead LE to your house. I suggest you take safe angles of your setup. I don't need a 360 degree setup. You can avoid brands and model numbers in your photography session.
There is a risk in what you do yes. I understand. I really do. But there is also a risk for us (infection and more).
You need to understand that we don't want to deal here with your "learning curve." The time period where a lab makes many mistakes fixing the "kinks." Your here at MESO because you got your A game.
Big Worm
New Member
Edit...
Last edited:
Big Worm
New Member
Edit - post got posted 3 times sorry.
Last edited:
Big Worm
New Member
Very strange feeling on this one - can't wait to see the pics of the autoclave and hood. Vials look way to similar to BIO - same layout, changed some wording, fonts, etc.. same tops.
What up Big Perm... I mean Big Worm! Haha!!!!!
luckyduck
Subscriber
Package came today, nice packaging. Will start log with pics of gear.
BIGMESC
New Member
My major award (guess the movie quote) came today Test E x 2.
Packing was good. Won't be running for awhile but will post up when I do.
Packing was good. Won't be running for awhile but will post up when I do.
yeeyee
New Member
@Luckyduck
Damnitt you are lucky. I haven't gotten mine yet
I was all excited when i went to the mailbox today but it was empty.
Damnitt you are lucky. I haven't gotten mine yet
I was all excited when i went to the mailbox today but it was empty.
Got my sample as well today. Great packing, definitely liked the vacuumed sealed vials as an extra protection. Best packing I've seen from a source yet. As for the gear I won't know but I'll be sure to post up when I run it within a few weeks. Vials were filled to the brim with oil. Really reminds me of bios vials and labels but they are definitely different. I've read and seen bloods on other forums of this lab and everything seems promising. Will update you guys on how I feel on it
Geeze guys, it would be helpful if the guys receiving would be running the gear within a week or so of receiving. Depending on the climate around the board and who has their hooks in some of these labs may not be able to weather the storm without some good feedback.
I know it's nice to fill your cabinets and have the coming summers cycle all lined up but that's not really doing anyone else any good. I would imagine guys that got free samples disclosed this to the source and to the board before accepting the freebies? It would be a help if you guys would discuss amongst yourselves and have the person that will be using the gear the fastest be the guy that gets the samples in order to expedite reviews.
I know it's nice to fill your cabinets and have the coming summers cycle all lined up but that's not really doing anyone else any good. I would imagine guys that got free samples disclosed this to the source and to the board before accepting the freebies? It would be a help if you guys would discuss amongst yourselves and have the person that will be using the gear the fastest be the guy that gets the samples in order to expedite reviews.
I fully disclosed to them I wouldn't be running the gear for a few weeks and wouldn't be running bloods but they chose to send me some samples for a review anyway. But I couldn't agree more with you BB
yeeyee
New Member
@BB
Not to worry. Ive been walkin to the mailbox alcohol swab and syringe in hand lol. Ill be startin as soon as i get it. Im guessing im probably a little farther south than jets and duck though. Havent got mine yet
Not to worry. Ive been walkin to the mailbox alcohol swab and syringe in hand lol. Ill be startin as soon as i get it. Im guessing im probably a little farther south than jets and duck though. Havent got mine yet
Similar threads
- Sticky
