Musclefactorylabs

What are the chances 90% of these "LAbs" are the same group of fucking scum bags? The money just shifts and the labels change. The group of meso labs has to be smaller than it appears from things I'm starting to see.
Duck,..labels changing and not much else? Every once in a while these clowns make a mistake and leave an old label on or something.
 
Oooookayy.. So update. Got the pack today. Somebody wanna let me in on the secret of why the Test Prop is filled to the very top of the vial and the Tren A is about half an inch lower?
 
Oooookayy.. So update. Got the pack today. Somebody wanna let me in on the secret of why the Test Prop is filled to the very top of the vial and the Tren A is about half an inch lower?

My two test e were exact fills. My prop had more in it. Think they might add more for prop.
 
Oooookayy.. So update. Got the pack today. Somebody wanna let me in on the secret of why the Test Prop is filled to the very top of the vial and the Tren A is about half an inch lower?

I told you yeye I got your pack and remailed a
fter I took some of your tren a as a sample. Haha!!!

I am going to start a log tonight with pics and my state info
 
Last edited:
I told you yeye I got your pack and remailed after I took some of your tren a as a sample. Haha!!!

Hahaha that's seriously what it looks like. You have the vials too right? Is your prop to the bottom of where the stopper sticks into the vial and the tren a just a little above the label?
 
The vials are not as dark as I thought they were going to be. They are more of a amber. With my light I can see inside the vial. Checked all gear and no floaters.
 
Same as your On the prop. Sorry for my bad form here. I am at the gym. My test e were lower filled exact level.

Oh okay cool. Thats probably whats going on then. I don't feel as bad injecting this stuff anymore lol. I'll be starting my log tomorrow. I'll be starting off with Musclefactory test p and tren a but at the same time I'll be running Peps Test E because I plan on extending the cycle after musclefactory's stuff runs out since they only gave me a vial of each which will end up lasting me 20 days, or just short of three weeks.
The Test E will be the only other thing I will be running and it won't kick in till around 4 to 5 weeks for me so it will not affect the review on Musclefactory.
After their stuff runs out I will most likely continue my log but I will be changing to Pep's Tren A Test E and Prop(Prop only till around week 4 or 5, so about a week after I run out of Musclefactory's stuff)
Sorry for the small novel here.
 
Order arrived today. Pics & detailed info later tonight or tomorrow. Gotta get off work to go get it...
 
I got Test Enanthate & Tren Acetate. Was the Test E by mistake? I actually prefer it to propionate now so no problem. The review may take longer because of the long ester though...
 
Last edited:
Hi Ricky,

I am still here. Balancing life / hobbies and family. You know how it is.. So you have not responded I see.. too bad it looks like stalling.. I guess your really busy ? I don't think MESO is filling up your pockets with orders yet so this reflects poorly on the customer service you are going to provide here.

I would, if anyone were willing to take the action, bet the farm because I know beyond a shadow of a doubt that these guys are NOT sending raws out for analysis. The stall tactics are infuriating because I know goddamn well this guy is simply deciding the best way to come up with something to shut you guys up

I didn't want to outright say it Ricky but your testing excuses were kind of weak. First you don't get it printed for security reasons but it goes to a third party lab.. but third party labs print and provide detailed results.. :confused:

If anything is produced it will be forged. There are templates out there.

Ben is on the money again. Of course I knew you can possibly forge this.. But I am wicked with Photoshop. But the goal was to try and catch you stalling.. which it seems like I caught you pretty good. heheh

You know sources have been getting smarter lately. Its a game of cat and mouse.

I have a 2 step proposition for you Ricky. You don't have that many products. Why don't you send a member (no not me) that we agree upon here 1 of each of your products to test with labmax. I know you sent some samples out already but they can only really test the Test through bloods.

In addition, lets try and catapult you to the top of our source pool. I have a list of labs both US and International that we can send your steroids to be tested. Its about $300 each lab. Your paying of course. But the condition is that once the results are out.. WE WANT THE LAB to CC a certain anonymous email address the result. You of course get CC'd as well.

Sure its an investment but think about it. You'll have MORE of our trust. Not 100 % ever but you'll look like a stud. At least we'll figure you'll stick to the same powder providers for those labmax and lab tested results. If / when you get new powders, we'll require testing.

Members will buy from you in droves. This forum does not charge fees for you to sell.. think of this as a marketing cost. Can you afford it ? You know if this is your first gig, and you don't have a stash of money already saved, we really don't want you learning on our body's dime.

I don't want to hurt your brand. I really am trying to keep this as classy as possible.

I still want to see your equipment pics. Lots of stalling there too btw.

I also want to see what you have to say about your initial mass spec tests. Really shaky response btw. Not in your favor.

The bar needs to be raised. I am raising it. This is my body and I don't want 60 % pure garbage in my body.

Ricky please don't ignore me and ensure you answer everything in this post. I won't miss a detail. Also I see some people bumping you that they got their stuff blah blah blah but i'll continue to bump and challenge you.

There is a joke everyone says about me in real life. If you can make dealer(substitute with real name) happy, you've passed.

Respectfully,

Dealer
 
Hi Ricky,

I am still here. Balancing life / hobbies and family. You know how it is.. So you have not responded I see.. too bad it looks like stalling.. I guess your really busy ? I don't think MESO is filling up your pockets with orders yet so this reflects poorly on the customer service you are going to provide here.



I didn't want to outright say it Ricky but your testing excuses were kind of weak. First you don't get it printed for security reasons but it goes to a third party lab.. but third party labs print and provide detailed results.. :confused:



Ben is on the money again. Of course I knew you can possibly forge this.. But I am wicked with Photoshop. But the goal was to try and catch you stalling.. which it seems like I caught you pretty good. heheh

You know sources have been getting smarter lately. Its a game of cat and mouse.

I have a 2 step proposition for you Ricky. You don't have that many products. Why don't you send a member (no not me) that we agree upon here 1 of each of your products to test with labmax. I know you sent some samples out already but they can only really test the Test through bloods.

In addition, lets try and catapult you to the top of our source pool. I have a list of labs both US and International that we can send your steroids to be tested. Its about $300 each lab. Your paying of course. But the condition is that once the results are out.. WE WANT THE LAB to CC a certain anonymous email address the result. You of course get CC'd as well.

Sure its an investment but think about it. You'll have MORE of our trust. Not 100 % ever but you'll look like a stud. At least we'll figure you'll stick to the same powder providers for those labmax and lab tested results. If / when you get new powders, we'll require testing.

Members will buy from you in droves. This forum does not charge fees for you to sell.. think of this as a marketing cost. Can you afford it ? You know if this is your first gig, and you don't have a stash of money already saved, we really don't want you learning on our body's dime.

I don't want to hurt your brand. I really am trying to keep this as classy as possible.

I still want to see your equipment pics. Lots of stalling there too btw.

I also want to see what you have to say about your initial mass spec tests. Really shaky response btw. Not in your favor.

The bar needs to be raised. I am raising it. This is my body and I don't want 60 % pure garbage in my body.

Ricky please don't ignore me and ensure you answer everything in this post. I won't miss a detail. Also I see some people bumping you that they got their stuff blah blah blah but i'll continue to bump and challenge you.

There is a joke everyone says about me in real life. If you can make dealer(substitute with real name) happy, you've passed.

Respectfully,

Dealer

Hi Dealer, I'm sorry I couldn't respond in a timely manner. Like you, I have a life outside of my business. Another job to help sustain this endeavor and a family to spend time with. I'll do my best to answer everything you asked truthfully... I hope I don't miss anything.

I'm sure I have had no orders from this board yet and I don't intend on receiving any until I've proven myself and my business is legitimate. This is something I have expected before we arrived here. I could have stayed on ASF and IMF, where we could have certain protections, but I wanted to show my potential customers that we're completely transparent and we don't take any shortcuts with the quality and service we offer. If you want Primo, I will give you exactly that. I've done plenty of diligent research before attempting to expand and take a risk on an uncensored board such as this. You guys are honest and reveal the smallest flaws of a source and that's what I need to improve my business.

I apologize for not being thorough about how we get our raws tested. I send it to an acquaintance of mine who gets it tested at the place he works. In return I compensate him with gear. However, he can only provide me with numbers. I am in the process of seeing if he can do me a favor and get me copies.

If you have a trusted member I can send a sample of each of my products to, I would be more than glad to send it for free. I think that's an excellent idea to prove you guys we're in this for the long haul. In fact, if anyone else orders or receives gear from me and tests it with labmax, I will compensate all the gear used to test it. This is to show that all our orders from now and in the future is legit. I ship out the same exact quality gear to my paying customers as I do to have tested.

I read about that lab testing on another thread and I was actually going to inquire with you about it. I am willing to put down $300 for each test. If it provides me with the trust of the community, I will do it.

Thanks man. I understand you're just trying to be thorough as possible due to the events which happened in the past here. But, I'm honestly glad you're bringing all this up because it's giving me a chance to prove myself.

Sincerely,
Ricky
 
Hi Dealer, I'm sorry I couldn't respond in a timely manner. Like you, I have a life outside of my business. Another job to help sustain this endeavor and a family to spend time with. I'll do my best to answer everything you asked truthfully... I hope I don't miss anything.

I'm sure I have had no orders from this board yet and I don't intend on receiving any until I've proven myself and my business is legitimate. This is something I have expected before we arrived here. I could have stayed on ASF and IMF, where we could have certain protections, but I wanted to show my potential customers that we're completely transparent and we don't take any shortcuts with the quality and service we offer. If you want Primo, I will give you exactly that. I've done plenty of diligent research before attempting to expand and take a risk on an uncensored board such as this. You guys are honest and reveal the smallest flaws of a source and that's what I need to improve my business.

I apologize for not being thorough about how we get our raws tested. I send it to an acquaintance of mine who gets it tested at the place he works. In return I compensate him with gear. However, he can only provide me with numbers. I am in the process of seeing if he can do me a favor and get me copies.

If you have a trusted member I can send a sample of each of my products to, I would be more than glad to send it for free. I think that's an excellent idea to prove you guys we're in this for the long haul. In fact, if anyone else orders or receives gear from me and tests it with labmax, I will compensate all the gear used to test it. This is to show that all our orders from now and in the future is legit. I ship out the same exact quality gear to my paying customers as I do to have tested.

I read about that lab testing on another thread and I was actually going to inquire with you about it. I am willing to put down $300 for each test. If it provides me with the trust of the community, I will do it.

Thanks man. I understand you're just trying to be thorough as possible due to the events which happened in the past here. But, I'm honestly glad you're bringing all this up because it's giving me a chance to prove myself.

Sincerely,
Ricky

I must say that it's refreshing to see that you read a few other threads here. You obviously saw where Inflatable Pharma biffed it hard, and looked at the lab max testing, and made smart comments here.

Now just follow through with something concrete, make dealer happy, and start collecting orders.
 
First shots tonight.

1cc Tren Acetate in left glute.

1cc Test Enanthate in right glute.

Post post-injection-pain and other details will be posted in my own thread tomorrow afternoon...after the Broncos win!
 
First shots tonight.

1cc Tren Acetate in left glute.

1cc Test Enanthate in right glute.

Post post-injection-pain and other details will be posted in my own thread tomorrow afternoon...after the Broncos win!

Code:
http://www.google.com/url?q=http://www.youtube.com/watch%3Fv%3DjdyMPLogVc4&sa=U&ei=WuTRUs2RKtKf7gbb_oDAAg&ved=0CCMQtwIwAA&usg=AFQjCNHPN6_cg7GvKuw6gEa80OjRkUQ0bw
 
Hi Dealer, I'm sorry I couldn't respond in a timely manner. Like you, I have a life outside of my business. Another job to help sustain this endeavor and a family to spend time with. I'll do my best to answer everything you asked truthfully... I hope I don't miss anything.

I'm sure I have had no orders from this board yet and I don't intend on receiving any until I've proven myself and my business is legitimate. This is something I have expected before we arrived here. I could have stayed on ASF and IMF, where we could have certain protections, but I wanted to show my potential customers that we're completely transparent and we don't take any shortcuts with the quality and service we offer. If you want Primo, I will give you exactly that. I've done plenty of diligent research before attempting to expand and take a risk on an uncensored board such as this. You guys are honest and reveal the smallest flaws of a source and that's what I need to improve my business.

I apologize for not being thorough about how we get our raws tested. I send it to an acquaintance of mine who gets it tested at the place he works. In return I compensate him with gear. However, he can only provide me with numbers. I am in the process of seeing if he can do me a favor and get me copies.

If you have a trusted member I can send a sample of each of my products to, I would be more than glad to send it for free.

Ok any volunteers MESO ?

I think that's an excellent idea to prove you guys we're in this for the long haul. In fact, if anyone else orders or receives gear from me and tests it with labmax, I will compensate all the gear used to test it. This is to show that all our orders from now and in the future is legit. I ship out the same exact quality gear to my paying customers as I do to have tested.

I read about that lab testing on another thread and I was actually going to inquire with you about it. I am willing to put down $300 for each test. If it provides me with the trust of the community, I will do it.

Great. I just started working on the logistics I'll get back to you soon.

Thanks man. I understand you're just trying to be thorough as possible due to the events which happened in the past here. But, I'm honestly glad you're bringing all this up because it's giving me a chance to prove myself.

As long as your ethical and honest we want you to succeed.

Pics of your setup please (don't be ashamed of what you have, one source here admits they don't have an autoclave and he still gets business). Don't forget to clear metadata when uploading pics.
 
Minor (2 out of 10) PIP from the Tren. None from the Test... Hopefully, it stays that way Monday.
 
Back
Top