[SOURCE] Canadian Domestic Anabolics Introduction

[CDNDA]

You do know my next one was gonna be for:
Test P 200
Tren A 200

Sooo when the NPP 200 gets going, you can prepare me a recipe waiting!!! Hahahaha

Both of those have been in testing phase for a while. So try out the NPP 200 when you get it.

If you like it I can ship the Test P 200 and Tren A 200 the next day.

I'm also Testing a Mast P 200 as well.

Im always working on something in the lab.

 

[CDNDA]

Let me rephrase: What is your filter made of?

Also, why are you cooking butyl rubber at 480*?

This would be the two areas you can have issues I can see right off the bat. Depending on your solvent solution you can have filtration failure given the material of the filter, and cooking butyl rubber for extended periods at that temp can compromise the integrity of the stopper.

Maybe instead of being standoffish and only answering posts that are positive towards you, take some feedback when you clearly asked for it in your previous post.


I am not trying to bash you but you did make a post talking about shit floating in your vials. So if you just wanted to post acting like my ex girlfriend saying 'go ahead kick me out' (spoiler: I kicked her out) then whatever dude keep living large

You asked me one question. I answered it

I have 3 types depending on what Im filtering.

Im not cooking rubber at that high of temp. If i said that it's a typo. My apologies.

I dont see any other questions. If i missed a question please do point it out.

Thank you.

 

[UpNorth]

You asked me one question. I answered it

I have 3 types depending on what Im filtering.

Im not cooking rubber at that high of temp. If i said that it's a typo. My apologies.

I dont see any other questions. If i missed a question please do point it out.

Thank you.

I have 3 types depending on what Im filtering.
What types are they? Do you know the material? This doesn't help at all


Im not cooking rubber at that high of temp. If i said that it's a typo. My apologies.
What temp are you sterilizing at?

 

[CDNDA]

I have 3 types depending on what Im filtering.
What types are they? Do you know the material? This doesn't help at all


Im not cooking rubber at that high of temp. If i said that it's a typo. My apologies.
What temp are you sterilizing at?

Are you trying to learn how to brew? If you are Meso has a homebrew section.

You can research bottle top filters and read about the types of materials they come in. I stock 3 types.

Also research sterilization procedures. Im sure more than enough articles have been written on the subject by now.

 

[UpNorth]

Are you trying to learn how to brew? If you are Meso has a homebrew section.

You can research bottle top filters and read about the types of materials they come in. I stock 3 types.

Also research sterilization procedures. Im sure more than enough articles have been written on the subject by now.

Do you really think given my previous questions towards you that I have no idea what I am talking about?

I am asking for your procedures because you posted you have particles floating in your vial... Why even post that if you aren't trying to figure it out. You say you are calling up your filter supplier but reading your methods I can see reasons why you would have compromised products. And I ask you a simple question and get a run around like you seem to know what you are doing. Good luck with your NPP @ 200mg, lol! (@Steve84 )

Like why can't you answer a question openly? You seem to spill your guts on random ramblings when someone posts saying your cialis worked lol.

Awesome! They call Cialis the weekender! And for good reason. Ive been getting requests for higher mg gear. @Steve84 started it but quite a few others have followed suit. So ill be adding higher mg gear in the future.

Eq will be available in 250 and 500mg dosages.

Ill be bumping my T400 to T500

Deca will be available at 250 and 500mg as well.

Test Prop will be available at 100mg and 150 or 200mg. I havent decided yet.

I'd like to make a high mg tren product as well. Maybe a high mg Tri Tren....mmmmm

Along with the previous mentioned additions to my list in previous posts im also testing a few hcg samples.

I am very skeptical on generic Chinese hgh. I refuse to rip my clients off. I refuse to let them pay for 100iu only to actually get 60 or so iu.

I've located some pharm HGH. If it checks out I'll carry it in a limited amount at first. 15 kits or so. If i get a favourable response and interest I'll carry it in full capacity.

 

[WCL]

Do you really think given my previous questions towards you that I have no idea what I am talking about?

I am asking for your procedures because you posted you have particles floating in your vial... Why even post that if you aren't trying to figure it out. You say you are calling up your filter supplier but reading your methods I can see reasons why you would have compromised products. And I ask you a simple question and get a run around like you seem to know what you are doing. Good luck with your NPP @ 200mg, lol! (@Steve84 )

Like why can't you answer a question openly? You seem to spill your guts on random ramblings when someone posts saying your cialis worked lol.

Thread subbed for the 200mg NPP without EO lol

 

[CDNDA]

Do you really think given my previous questions towards you that I have no idea what I am talking about?

I am asking for your procedures because you posted you have particles floating in your vial... Why even post that if you aren't trying to figure it out. You say you are calling up your filter supplier but reading your methods I can see reasons why you would have compromised products. And I ask you a simple question and get a run around like you seem to know what you are doing. Good luck with your NPP @ 200mg, lol! (@Steve84 )

Like why can't you answer a question openly? You seem to spill your guts on random ramblings when someone posts saying your cialis worked lol.

Im not going to respond to your speculation. Im sorry. So your whole premise is to try and embarrass me. Thats why I'm not answering you. You have an agenda. I read your posts. Ok. Thank you for your time. This will be the last response you'll get from me.

The people affected will be notified of what happened with the filter once my supplier gets back to me.

Have a good night.

 

[UpNorth]

Im not going to respond to your speculation. Im sorry. So your whole premise is to try and embarrass me. Thats why I'm not answering you. You have an agenda. I read your posts. Ok. Thank you for your time. This will be the last respobse you'll get from me.

The people affected will be notified of what happened with the filter once my supplier gets back to me.

Have a good night.

Yes because I am sure it is because of a faulty filter manufacture- and not at all possibility of a poor stopper solvent wash, followed by a 250c dry temp that would make it brittle and subject to breaking down when you insert a syringe.

But hey fuck me right what do I know?

Guess I better go back to the homebrew section to figure out where I can get one of them cap - m - quiks! and get into the game

 

[CDNDA]

Guys. I do not bake the stoppers at 250c. Dont listen to the peanut gallery. Read their posts and see which lab they support. Just about each and everyone that has tried to goad me has been very supportive of one particular lab.

So im sorry if i deal with these people in this way. If anyone asks me an honest question. Im more than happy to answer. Anyone who has dealt with me directly knows how open I am.

Some may view my approach as unprofessional. So be it.

 

[CDNDA]

So everyone knows.

I have been in talks with a public tester. Im working on sending in all of my raws and finished oils on an ongoing basis. So we will all constantly know exactly what the purity of my raws are and the exact dosage of each of my oils.

I plan to do this for every batch of raws. Posted here publicly each and every time. Im hoping to have results back before reopening.

 

[Steve84]

So everyone knows.

I have been in talks with a public tester. Im working on sending in all of my raws and finished oils on an ongoing basis. So we will all constantly know exactly what the purity of my raws are and the exact dosage of each of my oils.

I plan to do this for every batch of raws. Posted here publicly each and every time. Im hoping to have results back before reopening.

Just be careful if it's Jano. You might wanna do more research on him before you commit.

 

[UpNorth]

Guys. I do not bake the stoppers at 250c. Dont listen to the peanut gallery. Read their posts and see which lab they support. Just about each and everyone that has tried to goad me has been very supportive of one particular lab.



So im sorry if i deal with these people in this way. If anyone asks me an honest question. Im more than happy to answer. Anyone who has dealt with me directly knows how open I am.



Some may view my approach as unprofessional. So be it.

Well then tell me what you do do, instead of calling me a shill. I have been on you from the start because you don't seem to be on the level, and our interaction just proves it.



You don't like what I say? I must be in someones pocket then. Not withstanding the laundry list of mis steps you've taken, or your inability to answer questions about your methods or testing when pressed upon it.



I had the same issues with Mission back in the day when they put out some bad TNT, and I acutally ended up having a long and lengthy PM discussion and it helped me to learn a ton about the process and how he went about it. That is where I learned about different membranes and how solvents can affect them. This was after my postings, and I am glad I was able to have a conversation. He had a ton of knowledge, and his products displayed it. With you its the exact opposite- like some gear pumping trump caricature






I've been around the block man, I've seen so many people come and go and exit scam or get busted. Theres a reason why I stayed here because I was at least able to call out what I saw as shady. Whos dick am I riding... Pharmacom, Pareto, Newport, Nordic? I still use all of them except NP. Feel free to grill me on any of my experiences, you can see im pretty honest with my good and bad experiences.



For the record, i will post my review again because it lightens the mood of this BS



------

When I first ran mk677 I went on a date shortly after taking 30mg. First date- she was a little blonde who was pretty obviously down to slob on my knob, to put it discretely.

As I was driving to meet her, the mk667 kicked in I began to fantasize about dinner. Then my limbs began to tingle, like when you have low blood sugar. Fuck I was hungry. I picked her up and sped to the restaurant. I didn't speak the whole dinner because I couldnt stop eating- washing the food down with huge gulps of beer. When I did finally speak, it was to ask if my date was finished (she had stopped eating and was watching me eat with disgust). She said she was done, so I ate her dish too. Gain train doesn't stop, babe.

I waved my hand for the waiter, and requested dessert; I ordered one for each of us (she said she wasn't hungry lol), and just ravaged it. Even the waiter was looking at me weird, but I paid no attention to his gaunt and wizened ass.

Finally, we go back to her place. By this time, I just feel terrible- so fucking full man holy moly. I go to the washroom and it looks like im 5 months pregnant. I spend a few minutes in the washroom really poking my gut out and talking to myself, completely immersed in my own path to gains. She asks if im ok and I yell "JUST A MINUTE OK?"

Anyway, she tries to have sex with me, but now im so bloated and gassy that all I want to do is be alone. I eat her out, she fakes it, and I gtfo so I can go lift weights alone in my basement with my cat, Knuckles. I never call her again. Autumn comes swiftly.

I would rate MK677 - 8/10

-----

 

[CDNDA]

Just be careful if it's Jano. You might wanna do more research on him before you commit.

I wouldn't use anyone that doesnt have public credibility. That would hurt me. Not help me at all. And it would throw doubt into the minds of my clients.

Im the only one i know of who is sending in every new raw batch tested and posting it here. I'm planning to have every injectable I prepare tested as well. All results posted here on Meso. At my cost. Do the math. Lets say i have 30 items on my list. Im spending a great deal of my own money to prove to my clients that they made a good choice in choosing me as one of their sources.

I care deeply for my business and i care about my clients. Im sorry. I cannot act like i dont care. I wouldnt be here if i didnt care. Im looking into how to support AL. Even though they dont test Canadian Labs they do a lot of good work to keep people safe. Meso has been good to me and I wish to pass sone of that good fortune along. Pay it forward.

 

[EazyE]

Well then tell me what you do do, instead of calling me a shill. I have been on you from the start because you don't seem to be on the level, and our interaction just proves it.



You don't like what I say? I must be in someones pocket then. Not withstanding the laundry list of mis steps you've taken, or your inability to answer questions about your methods or testing when pressed upon it.



I had the same issues with Mission back in the day when they put out some bad TNT, and I acutally ended up having a long and lengthy PM discussion and it helped me to learn a ton about the process and how he went about it. That is where I learned about different membranes and how solvents can affect them. This was after my postings, and I am glad I was able to have a conversation. He had a ton of knowledge, and his products displayed it. With you its the exact opposite- like some gear pumping trump caricature






I've been around the block man, I've seen so many people come and go and exit scam or get busted. Theres a reason why I stayed here because I was at least able to call out what I saw as shady. Whos dick am I riding... Pharmacom, Pareto, Newport, Nordic? I still use all of them except NP. Feel free to grill me on any of my experiences, you can see im pretty honest with my good and bad experiences.



For the record, i will post my review again because it lightens the mood of this BS



------

When I first ran mk677 I went on a date shortly after taking 30mg. First date- she was a little blonde who was pretty obviously down to slob on my knob, to put it discretely.

As I was driving to meet her, the mk667 kicked in I began to fantasize about dinner. Then my limbs began to tingle, like when you have low blood sugar. Fuck I was hungry. I picked her up and sped to the restaurant. I didn't speak the whole dinner because I couldnt stop eating- washing the food down with huge gulps of beer. When I did finally speak, it was to ask if my date was finished (she had stopped eating and was watching me eat with disgust). She said she was done, so I ate her dish too. Gain train doesn't stop, babe.

I waved my hand for the waiter, and requested dessert; I ordered one for each of us (she said she wasn't hungry lol), and just ravaged it. Even the waiter was looking at me weird, but I paid no attention to his gaunt and wizened ass.

Finally, we go back to her place. By this time, I just feel terrible- so fucking full man holy moly. I go to the washroom and it looks like im 5 months pregnant. I spend a few minutes in the washroom really poking my gut out and talking to myself, completely immersed in my own path to gains. She asks if im ok and I yell "JUST A MINUTE OK?"

Anyway, she tries to have sex with me, but now im so bloated and gassy that all I want to do is be alone. I eat her out, she fakes it, and I gtfo so I can go lift weights alone in my basement with my cat, Knuckles. I never call her again. Autumn comes swiftly.

I would rate MK677 - 8/10

-----

Now that’s one hell of a product review! Moral of the story is mk677 will make you choose food over pussy!

 

[Steve84]

Now that’s one hell of a product review! Moral of the story is mk677 will make you choose food over pussy!

Fuckkkk that...
Pussy always wins, unless it's fat pussy then you can have it

 

[CDNDA]

So my new products will include...

Test P 200
Tren A 200*
NPP 200*
Mast E 200
Arimidex
Aromasin
Letro
Prami
Clen
T3
EQ 500*
Deca 250 and 500*
EQ 250 and 500*
Test 500*
Sustanon
HCG *
Real Pharma hgh. Not chinese garbage.*

* denotes testing phase.

Plus a custom brew interface I'm working on as well.

 

[Steve84]

So my new products will include...

Test P 200
Tren A 200*
NPP 200*
Mast E 200
Arimidex
Aromasin
Letro
Prami
Clen
T3
EQ 500*
Deca 250 and 500*
EQ 250 and 500*
Test 500*
Sustanon
HCG *
Real Pharma hgh. Not chinese garbage.*

* denotes testing phase.

Plus a custom brew interface I'm working on as well.

Was there no demand for:
Primo 100/200?
Tren E 200
Mast P 150
NPP 100
Those are normally standard products on most suppliers.

 

[CDNDA]

All right boys and girls of all ages...come one...come all! Im giving away gear for free!


Ok...now that i have your attention I'll be not giving away free gear...sorry. I will however be giving away something free.

Ill be providing you all with some information about my procedures and methods. How I do things. Sterilization and filtration will be the focus. Hopefully after reading some more light will be shone onto my mysterious ways and how I love my babies...lol. Love Babies? Yes yes these are definitely my love babies.

Wait...what? You use 3 different filter types? Huh? Wtf? Tell us why you fucking trump, facebook, soap opera, drama queen, weirdo!!

Ok. Alright...I will give you guys the basic run down on filter types. Plus a lot more...a lot more. If i expect you to inject my product. It's only fsir thst you know what goes into it.

So later on tonight ill slip into my robe, slippers all sexy and bare chested...sip a very fine pinot and give you all the 4-1-1.

Stay tuned Mesoites!!!

 

[CDNDA]

Was there no demand for:
Primo 100/200?
Tren E 200
Mast P 150
NPP 100
Those are normally standard products on most suppliers.

They are in addition to not in place of.

 

[Cownan]

All right boys and girls of all ages...come one...come all! Im giving away gear for free!


Ok...now that i have your attention I'll be not giving away free gear...sorry. I will however be giving away something free.

Ill be providing you all with some information about my procedures and methods. How I do things. Sterilization and filtration will be the focus. Hopefully after reading some more light will be shone onto my mysterious ways and how I love my babies...lol. Love Babies? Yes yes these are definitely my love babies.

Wait...what? You use 3 different filter types? Huh? Wtf? Tell us why you fucking trump, facebook, soap opera, drama queen, weirdo!!

Ok. Alright...I will give you guys the basic run down on filter types. Plus a lot more...a lot more. If i expect you to inject my product. It's only fsir thst you know what goes into it.

So later on tonight ill slip into my robe, slippers all sexy and bare chested...sip a very fine pinot and give you all the 4-1-1.

Stay tuned Mesoites!!!

Im not going to rant or anything but come on man. This is business and your treating it like a joke. If you have good gear then how about you stfu and be professional. PS youll never be able to make some of the items you mentioned. People will be dropping like flies and your business will go down as fast as it shot up. Seen it many times. Fair warning is all

Fuck this is like watching the USA election between you and up north. Least I know who im voting for as clowns should never be in office.