Source code of conduct rough draft

One of us just need to remember to copy and paste this too every now and then...

1. Pics and description of brewing process.

2.Secure email that that does not include safemail.
-a. Pgp encryption highly recommended

3. Full disclosure.
- a. Who are your reps/schills don't try to be sneaky we almost always catch
On
-b. If free gear is given name who it was given to

4. References. Do you source at other boards.

5. Sources limited to one thread pushing their product.

6. If source had a website it cannot be hosted in the U.S.

Highly recommended

1. Pgp encryption

2. Bit coin payment option

3. Set up an escrow service

4. Donate fund to labmax for random testing by members.[/QUOTE] Stomps
 
Make a new source code of conduct thread with voltrader's above list as the first post. That way no one has to read thru all the other pages. It's right there on the front page and there's no excuse.
 
That one was changed to pics and description of brewing process. We are most concerned about the equipment and sterilization techniques the brewer uses. Unless I am wrong, I dont see pics of autoclaves, flow hoods, filters, burners, beekers, vials, and all that good stuff any more dangerous than posting pics of finished product.

Regular, we value your input here at Meso and would greatly appreciate any suggestions or criticism regarding our member enforced source code of conduct.

EBK


This is an unrealistic and dangerous expectation.
 
This is the single best thing that has ever happened for the members of our board. Back us up brothers. Do not place any orders with any source that does not comply. What we are asking should not be difficult or compromise a sources safety
This is what makes us better than the rest,.
I hope that the sources who have been vetted understand that they are expected to live up to the standard we have set. No fucking ego trips, we don't buy that bull shit.
 
This is the single best thing that has ever happened for the members of our board. Back us up brothers. Do not place any orders with any source that does not comply. What we are asking should not be difficult or compromise a sources safety
This is what makes us better than the rest,.
I hope that the sources who have been vetted understand that they are expected to live up to the standard we have set. No fucking ego trips, we don't buy that bull shit.
idk..i haven`t seen ANY pics from anyone yet of autoclaves, flow hoods, filters, burners, beekers, vials, etc. here. not from sources trying to come onto here or past, previous sources such as atsro or who ever you guys like and use here.
 
idk..i haven`t seen ANY pics from anyone yet of autoclaves, flow hoods, filters, burners, beekers, vials, etc. here. not from sources trying to come onto here or past, previous sources such as atsro or who ever you guys like and use here.

Incorrect. Astro, a well established source, provided these. Look in his first thread. I also believe mfl did as well. Ascendant I'm not so sure, and I believe his activity has suffered as a result.
 
Brutus is right. Astro was the first to rise up, and this was before the COC. MFL was the first to meet the COC after it was here. Pics and all.

Incorrect. Astro, a well established source, provided these. Look in his first thread. I also believe mfl did as well. Ascendant I'm not so sure, and I believe his activity has suffered as a result.
 
This is an unrealistic and dangerous expectation.

This is what Ive been telling these clowns here for months. I was ridiculed, and pretty much spit at for saying something similar to you..

That one was changed to pics and description of brewing process. We are most concerned about the equipment and sterilization techniques the brewer uses. Unless I am wrong, I dont see pics of autoclaves, flow hoods, filters, burners, beekers, vials, and all that good stuff any more dangerous than posting pics of finished product.

Regular, we value your input here at Meso and would greatly appreciate any suggestions or criticism regarding our member enforced source code of conduct.

EBK

Oh, now its changed. How come? Like I said before, I said this was a bad idea, and you fucking clowns, were on my case every time I posted this.. Unreal..
 
This is what Ive been telling these clowns here for months. I was ridiculed, and pretty much spit at for saying something similar to you..







Oh, now its changed. How come? Like I said before, I said this was a bad idea, and you fucking clowns, were on my case every time I posted this.. Unreal..


What's up IM!!

I don't know, maybe I'm just a little thick when it comes to this but I have yet to hear a logical explanation of why pics of a flow hood or autoclave would put additional risk on a public source.. I mean they already have their dicks out flapping in the wind!!
 
Nothing has changed except the tone used he posted once and put his thoughts out there. As for you....you continually say the same thing. We know your stance we know your attitude so you get no love here. You choose to ridicule instead of help. So the only thing changed was regular was shown some respect that you will never get.
 
What's up IM!!

I don't know, maybe I'm just a little thick when it comes to this but I have yet to hear a logical explanation of why pics of a flow hood or autoclave would put additional risk on a public source.. I mean they already have their dicks out flapping in the wind!!

Hey bro! If this guy was selling tabs, would you ask to see his pill press? They are highly illegal to have in the US. You have to look at the big picture. Showing pics of a lab is a bad idea in general. Even if you were curious about his brewing process, how do you know its sterile?? He could throw up white curtains and tell you one thing, but his lab is in his shit hole bathtub in the basement..

Nothing has changed except the tone used he posted once and put his thoughts out there. As for you....you continually say the same thing. We know your stance we know your attitude so you get no love here. You choose to ridicule instead of help. So the only thing changed was regular was shown some respect that you will never get.

Go fuck yourself. I could get two shits if a clownfuck named Voltrader gives me no love. You think I am going to lose sleep over some schmuck like you on Meso? LMAO!
 
For a ug lab, I don't see how a photo of their lab equipment is going to put anyone in jeopardy or to ask them to test their raws.
Looks like the legit sources we have are doing very well.
 
Italianhustler, the troll of the year award goes to you. You must be a terrible person to know in real life.

I would love to engage in an intelligent debate with you but you lack the common sense required. Your skull is so thick,a pick axe could not penetrate it.
 
That one was changed to pics and description of brewing process. We are most concerned about the equipment and sterilization techniques the brewer uses. Unless I am wrong, I dont see pics of autoclaves, flow hoods, filters, burners, beekers, vials, and all that good stuff any more dangerous than posting pics of finished product.

Regular, we value your input here at Meso and would greatly appreciate any suggestions or criticism regarding our member enforced source code of conduct.

EBK

I applaud the effort you guys are making to defend yourselves from the sea of scammers and government scrutiny. Some of the ideas you've presented are a step in the right direction. I'd be happy to help you guys.

I'm not in favor of, nor do I see any benefit to, posting photos of a clandestine lab on the internet.

Lets say one guy with a cup and jar lab posts photos of his operation, then another with a hormone superlab that's got enough pill presses running the operator has to wear hearing protection. Which lab is going to be targeted by the DEA? Think of it the way you would think of big game hunting or fishing.

What benefit is there to anyone besides law enforcement to obtain photographic evidence of a clandestine laboratory operator's capital? Thanks for the photos of all of your equipment, I'm going to include them in this search warrant request / wiretap request / indictment / prosecution. - Federal and local LEOs.

In the event photos are posted how would anyone be able to verify their authenticity? What would prevent someone from taking a photo of a hood or a glove box they have access to and don't own?

In my opinion the photo idea is going to create increased risk and draw attention you don't want in exchange for no benefit beyond curiosity satisfaction.
 
Last edited:
Hey bro! If this guy was selling tabs, would you ask to see his pill press? They are highly illegal to have in the US. You have to look at the big picture. Showing pics of a lab is a bad idea in general. Even if you were curious about his brewing process, how do you know its sterile?? He could throw up white curtains and tell you one thing, but his lab is in his shit hole bathtub in the basement..

I used to cook up big eights in pyrex. Whip with my favorite giant whisk in a giant metal bowl. .. got scratched and product stuck in it somethin fierce even with my sick spatula/wrist game, but I had great yields with that bowl- my lucky bowl. I could turn eight into eleven and that shit would have them coming back to me or going to the hospital.

My point?

The shit you could have scraped out of that pyrex would have gotten me 10-15. Now, lets be clear, I was never stupid enough TO ADVERTISE THE FACT I WAS SELLING NARCOTICS ON THE FUCKING INTERNET- NOT ONLY THAT, BUT ACTUALLY SELLING DRUGS TO RANDOM PEOPLE I DON'T KNOW FROM ADAM RESPONDING TO THOSE ADVERTISEMENTS.

So let that point resonate with obvious ring that these public suppliers are not particulary concerned with safety, anonymity, keeping themselves out of the law enforcement eye.

so - my pyrex always had more than five grams of "big issue" product on it which puts it in the same manufacture and distribution category as a pill press... just having it was the crime, and if I was already advertising the fact that I sold pills and other illegal steroids who fucking cares if I post some pictures of some generic product like Pyrex, lf hood, autoclave, or the mythical pill press? How is that dangerous where detailing the fact I ship illegal substances throughout the country and make profits I don't pay taxes on?

Is there a scratch on my autoclave that will lead them right to me? Doubt it. Lets be real- if they have it they use it. Pics mean something. Too stupid to use a real camera instead of your phone camera and they extract metadata from the pic? That's you being an idiot, not the pictures being a bad idea.
 
The bottom line is that it appears to be working. Has anyone bought bogus gear from any vetted sources?
 
Back
Top