ST anabolic raws source

baddaddee · May 19, 2019

Another fast drama free transaction. Thank you...

Elistheman · May 19, 2019

Received my first order with this vendor after only one week. Asked them to ship it with extra care and stealth. I live in a country with strict customs so i asked extra stealth, it costed almost half my order but trust me, the best stealth i have seen yet. I am going to "test" the quality as soon as i start a summer run. Will update. My order was Boldenone prop and NPP.

Bat23man · May 20, 2019

Elistheman said:
Received my first order with this vendor after only one week. Asked them to ship it with extra care and stealth. I live in a country with strict customs so i asked extra stealth, it costed almost half my order but trust me, the best stealth i have seen yet. I am going to "test" the quality as soon as i start a summer run. Will update. My order was Boldenone prop and NPP.

Thanks for the review. It took some extra time of doing the stealth but it deserves since you like it.

Bold prop is not a hot sell one , but we can offer shipping from China.

TX_Hempknight · May 21, 2019

Im sure its somewhere in here, but what is your domestic min order amount?

Bat23man · May 21, 2019

TX_Hempknight said:
Im sure its somewhere in here, but what is your domestic min order amount?

hey,
Minimum is 10g each for most raws shipping from domestic.

egonormical1010 · May 21, 2019

Elistheman said:
Received my first order with this vendor after only one week. Asked them to ship it with extra care and stealth. I live in a country with strict customs so i asked extra stealth, it costed almost half my order but trust me, the best stealth i have seen yet. I am going to "test" the quality as soon as i start a summer run. Will update. My order was Boldenone prop and NPP.

I’ve used ST several times and every order has been 100% smooth. She’s went above and beyond to help me out with no questions asked.

By the way, did you mean you ordered Boldenone Propionate and NPP or Boldenone, Test Prop, and NPP ?

Elistheman · May 23, 2019

egonormical1010 said:
By the way, did you mean you ordered Boldenone Propionate and NPP or Boldenone, Test Prop, and NPP ?

Bold prop and NPP. The bold was brewed today. so far seems ok. holds at 100mg/ml as expected.

Grandpa Gainz · May 29, 2019

Grandpa Gainz · May 29, 2019

This is after filtering once and trying again. Still looks like shit. Any thoughts. It’s test cyp at 250. 2% 18%. Can’t figure out what I did wrong. Slow heat. Stirring the crap out of it! 400ml down the drain.

penche · May 29, 2019

Grandpa Gainz said:
This is after filtering once and trying again. Still looks like shit. Any thoughts. It’s test cyp at 250. 2% 18%. Can’t figure out what I did wrong. Slow heat. Stirring the crap out of it! 400ml down the drain.

Have you tried to crank up the heat to about 250* for 30 min? That shouldn’t hurt test cyp hormone. Looks like a little moisture is trapped. It can be fixed in my opinion

Grandpa Gainz · May 29, 2019

penche said:
Have you tried to crank up the heat to about 250* for 30 min? That shouldn’t hurt test cyp hormone. Looks like a little moisture is trapped. It can be fixed in my opinion

Ok thanks for advice. I’ll give that a try.

Bat23man · May 29, 2019

Grandpa Gainz said:
Ok thanks for advice. I’ll give that a try.

If it's moisture ,heat should help. I pmed and emailed you. Please email me back if you can.

Grandpa Gainz · May 29, 2019

Bat23man said:
If it's moisture ,heat should help. I pmed and emailed you. Please email me back if you can.

I believe in transparency with the community! I didn’t post in this thread to get a discount or whatever! Just wanted to see if anyone else experienced this and could help. I know this is a raw thread, figured a good place to ask.
Anne wants to help me on loses but the way I look at it. If I’m the only one it happened to, I fucked up somewhere. Not the product. So long story longer, I don’t want discount or free powder. I wouldn’t feel right, since I talk so much shit about people that take! Lol
Side note. I think it’s says a lot about batwoman to try to work this out. Good businessperson lol. IMHO. Thanks batwoman. Trust me we’re cool. Ok I’m done. Dinner time.

penche · May 29, 2019

Grandpa Gainz said:
I believe in transparency with the community! I didn’t post in this thread to get a discount or whatever! Just wanted to see if anyone else experienced this and could help. I know this is a raw thread, figured a good place to ask.
Anne wants to help me on loses but the way I look at it. If I’m the only one it happened to, I fucked up somewhere. Not the product. So long story longer, I don’t want discount or free powder. I wouldn’t feel right, since I talk so much shit about people that take! Lol
Side note. I think it’s says a lot about batwoman to try to work this out. Good businessperson lol. IMHO. Thanks batwoman. Trust me we’re cool. Ok I’m done. Dinner time.

Did you exhaust the heat method already my dude? You can also add about 2% more BB because you’re right at the brim on 18% with 250mg strength. I’ve done it at that bb percent and I had some tiny crystals floating. Try increasing the bb 2% and hit the heat intervals. I’ve seen this before, if you need help pm me and I can do my best to help you bro.

Iron Vett · May 30, 2019

Grandpa Gainz said:
This is after filtering once and trying again. Still looks like shit. Any thoughts. It’s test cyp at 250. 2% 18%. Can’t figure out what I did wrong. Slow heat. Stirring the crap out of it! 400ml down the drain.

When I’ve had a brew turn out like this, the filter funnel had degraded and I believe that plastic ended up in the oil. The filter was formed with polystyrene and I just looked up the millipore bottle too filter and it’s made out of polystyrene as well. After filtering I noticed that the plastic filter funnel had turned somewhat milky. When the compound cooled in the media bottle, it had the appearance that yours does in the picture. I was able to filter it cold and it cleared up and I pinned it and everything was fine but I can’t recommend for you to try this. I can only say it worked for me. I brew only mct and mct/eo blends. I can’t attest to whether the filters will do this with GSO or other carriers as well

Grandpa Gainz · May 30, 2019

Iron Vett said:
When I’ve had a brew turn out like this, the filter funnel had degraded and I believe that plastic ended up in the oil. The filter was formed with polystyrene and I just looked up the millipore bottle too filter and it’s made out of polystyrene as well. After filtering I noticed that the plastic filter funnel had turned somewhat milky. When the compound cooled in the media bottle, it had the appearance that yours does in the picture. I was able to filter it cold and it cleared up and I pinned it and everything was fine but I can’t recommend for you to try this. I can only say it worked for me. I brew only mct and mct/eo blends. I can’t attest to whether the filters will do this with GSO or other carriers as well

Thanks for advice. And yeah the gear ended up with that milky look and a blue tint. Lol. I will try to filter it again after I add B.B. and more MCT. Like @penche mentioned. Gonna try and bring it down to 200mg. Hopefully it will clean up!

Grandpa Gainz · May 30, 2019

penche said:
Did you exhaust the heat method already my dude? You can also add about 2% more BB because you’re right at the brim on 18% with 250mg strength. I’ve done it at that bb percent and I had some tiny crystals floating. Try increasing the bb 2% and hit the heat intervals. I’ve seen this before, if you need help pm me and I can do my best to help you bro.

Thanks for advice brother! Yeah I’m gonna give that a try this weekend! Gonna bring it down to 200mg and see what happens! And yeah if I have any questions I will pm you. Ty

Bat23man · Jun 3, 2019

ST Special offer in June.
#1 Special price for Domestic USA shipping orders.

Mast prop usd300/50g (original price is usd330 ) usd580/100g (original price is usd600 )

Test prop usd60/50g (original price is usd80) usd100/100g (original price is usd150)

Shipping cost is usd30 per package, fast and stealth delivery.

#2 Special offer for International shipping orders

15% off for any orders. Shipping cost differs a little to different countries.

Anybody needs dpox, I would like to offer it at a factory price!

Contact me via Steroidstour at protonmail dot com or wickr me steroidstour.

Bat23man · Jun 5, 2019

HCG available in the warehouse. Anyone need , please email or message me.

baddaddee · Jun 5, 2019

Bat23man said:
HCG available in the warehouse. Anyone need , please email or message me.

In domestic?

ST anabolic raws source

Member

Member

Member

Well-known Member

Member

Well-known Member

Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Well-known Member

Member

Member

Member

Similar threads

Sponsors