clearheaded
Member
u never even listed any proper equipment lol. anyway, yup think everyones seen what they need to see and yes plenty of sources post pics SOP around here.
MESO-Rx
Anabolic Steroids
Testshop247 Canadian Domestic Injectables
- Thread starter Testshop247
- Start date
Testshop247
Subscriber
I have already asked for links to details on lab equipment/lab photos/set-ups etc only to hear crickets.
PM me when you have the information so we dont involve them by name in public out of respect for the other UGLs
Last edited:
Jamesfuknwatson
New Member
The last thing I wanna do is break any rules and ask any questions but, inbox me I’d consider seeing what’s going on now that I’m stuck, I fuckin hate having to do this but…
Inbox me if possible. Much respect for all and everyone’s patience no bs
Inbox me if possible. Much respect for all and everyone’s patience no bs
oddsonfavourite
Member
Testshop247 there are some basic requirements that you should have posted, especially a piece of paper showing the date and meso, with your stock. On the flip side of that, I do notice that two individuals in this thread, being unclebob and clearheaded seem to have it our for you the most. My speculation is that based on their extensive knowledge of brewing, and more so, their post history, they like to attack other labs as well on this forum.
How would clearheaded know the requirements at another forum for sources unless he was a source that applied? How come uncle bob claims to be a longtime vet on the forums but his handle cannot be found at any other forum on the net. Those two seem to know an awful lot about everything.
Your low prices are triggering them because it poses a risk of them losing sales to whatever labs they are behind. I'd suggest to put those two on ignore, but also to try and fulfill some of the basic requirements of meso. Good luck, time will tell how you do.
How would clearheaded know the requirements at another forum for sources unless he was a source that applied? How come uncle bob claims to be a longtime vet on the forums but his handle cannot be found at any other forum on the net. Those two seem to know an awful lot about everything.
Your low prices are triggering them because it poses a risk of them losing sales to whatever labs they are behind. I'd suggest to put those two on ignore, but also to try and fulfill some of the basic requirements of meso. Good luck, time will tell how you do.
If money is involved or losing money through competition, this is normal practice. I've been in the forum long enough to see how ugls send their attack dogs to dispute, smear or plain attack other ugls even the established ones just to tilt the costumers to their side.
This is normal practice. Just imagine how much money they're going to lose if QSC establish a stable Canadian domestic warehouse. They have already lost a little bit of money with the canadian special line giving a safer access to homebrewing.
It's an uphill battle for new ugls, however, the more competition the better for us consumers.
Plus, you will notice the louder the scrutiny and biases come out, you'll know who has agendas and who is genuine in looking out for the greater good.
This is normal practice. Just imagine how much money they're going to lose if QSC establish a stable Canadian domestic warehouse. They have already lost a little bit of money with the canadian special line giving a safer access to homebrewing.
It's an uphill battle for new ugls, however, the more competition the better for us consumers.
Plus, you will notice the louder the scrutiny and biases come out, you'll know who has agendas and who is genuine in looking out for the greater good.
unclebob
Member
So this amateur(at best)can't even be bothered to make a half assed into and when I get on him for that it's purely for financial reasons? Yah ok then lol
Nice to see you guys sticking up for a new source who can't even be bothered to post up some basic product pictures and perhaps we should question your motives for doing so, but as for me........well I've had an abscess before from using shit gear and all I'm trying to do is prevent anyone else from going through that horrible experience!
oddsonfavourite
Member
I will not use this source because I am already doing business elsewhere. I also won't do business with this source because they have not proven themselves here. I don't know how you would think I have an interest in this lab, but I am all ears.So this amateur(at best)can't even be bothered to make a half assed into and when I get on him for that it's purely for financial reasons? Yah ok then lol
Nice to see you guys sticking up for a new source who can't even be bothered to post up some basic product pictures and perhaps we should question your motives for doing so, but as for me........well I've had an abscess before from using shit gear and all I'm trying to do is prevent anyone else from going through that horrible experience!
I'm not sticking for anyone especially this source lol. He can do whatever he wants it's a free country, just like anyone can or cannot buy from him.So this amateur(at best)can't even be bothered to make a half assed into and when I get on him for that it's purely for financial reasons? Yah ok then lol
Nice to see you guys sticking up for a new source who can't even be bothered to post up some basic product pictures and perhaps we should question your motives for doing so, but as for me........well I've had an abscess before from using shit gear and all I'm trying to do is prevent anyone else from going through that horrible experience!
However, it's hypocritical for you to ask for pictures and demand all this stuff to satisfy your so called safety checks while I don't see you post this demands on the pages of the big labs. Go post at the oxygen, syn and Nordic pages and I'll apologize right away.
Make them show us their equipments and sterilization procedures for our safety please.
I'm sorry to hear you had abcess from bad gear, the more reason you need to make everyone accountable not just the small guys.
clearheaded
Member
lol thats hilarious. common knowledge over at SST somehow makes me a seller?
odds are the fact "oddsonfavorite" spent hours scouring the net for evidence makes it likely that he is in fact test24X7 other account as says he's been here for years. haha looked into post history is hilarious to somehow prove some point. which im not sure what your point is folks ask for the same things on EVERY SINGLE source.... im simply fallowing suite.
anyway its obv a scam guys, 0 stock, 0 pics. even though has been here for years but doesn't know "the rules" or think they dont apply.
if think its smart to buy from a guy who doesn't have sterilization procedures nor proper filters nor pics of stock, your going to loose your money at best, worst get infection.
odds are the fact "oddsonfavorite" spent hours scouring the net for evidence makes it likely that he is in fact test24X7 other account as says he's been here for years. haha looked into post history is hilarious to somehow prove some point. which im not sure what your point is folks ask for the same things on EVERY SINGLE source.... im simply fallowing suite.
anyway its obv a scam guys, 0 stock, 0 pics. even though has been here for years but doesn't know "the rules" or think they dont apply.
if think its smart to buy from a guy who doesn't have sterilization procedures nor proper filters nor pics of stock, your going to loose your money at best, worst get infection.
oddsonfavourite
Member
How would you know so much about sst and the requirements for sources? I could not find that information anywhere so that lead me to believe that you are either one of the moderators from there, or you are a source that applied there?
How come I havn't seen you doing this in certain other labs threads then? You seem selective on what labs you question. I am bringing to light the fact that you add no value to this forum, besides attacking labs. If you were adding value then you would be vetting and then recommending becuase it's all about end user safety. What lab are you using that is so highly tested and great, where nobody is shilling for them? Do tell, as I may actually try the lab if I havn't already.
I'll make you feel better too. People, don't buy from this source until they prove to you whatever you need to have proven such as stock, equipment, etc. I won't buy from them and I have no interest in them.
Testshop247
Subscriber
If anyone is interested in a stock pic just email me and ask 
I have already sent out a few to those who were actually interested in placing an order.
I won't be answering anymore questions from the peanut gallery
I have already sent out a few to those who were actually interested in placing an order.
I won't be answering anymore questions from the peanut gallery
Cumminstech
Well-known Member
I do not source on sst nor do I ever plan on it.
I've been around on meso long enough to know that nobody posts actual photos of their set ups.
No UGL would in their right mind post those pics for safety reasons. I have the proper equipment and thats all you need to know.
If you don't like it then move on or continue to post in the thread and keep it bumped
I honestly think that "safety" Is a common excuse because they don't want to be posting pictures of a kitchen. Removing metadata from pictures isn't hard. They want to leave it to peoples imaginations that they have these elaborate labs in a GMP like facility.
I think vetting sources is important, but in order to vet a source you have to actually ask questions that matter and are relevant. In this case I didn't care much about lab pics because I know its a kitchen setup so what are pics gonna do. I've seen a sink and countertop before.
But your not vetting your just attacking and jumping to conclusions and making things up to steer people away. It makes it seem like you just don't like that someone has come along offering low prices and makes me question your motives.
For the record, this is not me giving the source my recommendation of "good to go". That is yet to be determined.
Testshop247
Subscriber
Now Available :
Pharma Clenbuterol Sopharma 0,02 mg tablets (50 Tablets) - $ 60
Pharma T3 triiodothyronine 25 micrograms (100 Tablets) - $ 60
Pharma Ephedrine Sopharma 50mg/ml (box of 10 ampules) - $ 50
Lantus Solostar 100 iu/ml (1 prefilled pen) - $50
Humalog KwikPen 100 iu/ml (1 prefilled pen) $50
Pharma Clenbuterol Sopharma 0,02 mg tablets (50 Tablets) - $ 60
Pharma T3 triiodothyronine 25 micrograms (100 Tablets) - $ 60
Pharma Ephedrine Sopharma 50mg/ml (box of 10 ampules) - $ 50
Lantus Solostar 100 iu/ml (1 prefilled pen) - $50
Humalog KwikPen 100 iu/ml (1 prefilled pen) $50
Check your email
Testshop247
Subscriber
Available in 4-6 weeks
Test P (100mg/ml)
Mast P (100mg/ml)
Mast E (150mg/ml)
Deca (300 mg/ml)
Test P/Tren A 75/75 Blend (150 mg/ml)
Test P/Tren A/Mast P 50/50/50 Blend (150 mg/ml)
Test P (100mg/ml)
Mast P (100mg/ml)
Mast E (150mg/ml)
Deca (300 mg/ml)
Test P/Tren A 75/75 Blend (150 mg/ml)
Test P/Tren A/Mast P 50/50/50 Blend (150 mg/ml)
Bakes93
Member
We need to see the stove top brother
Wishing you all the best, we can never have enough Canadian labs or sources as long as they're legit keep up the testing sounds like you've been taking care of your customers well so far
Last edited:
Similar threads
Sponsors
Latest posts
-
-
-
Sigma Audley Inc. - Your source for peptides, ancillaries, AAS, and more!- Latest: SigmaAudley China Peptide
-
