Titanium Gear Industries (domestic source)

Would be great if someone else has it. Hopefully the originally tested can grab that vial and send it back off.

Do you happen to keep a record of your math/ratios. Again I have no idea how your ends works

I know when I reload a new setup. I write down all my factors. Change 1 thing, test, back to control. I do this till I find a load i like , and I usually document it. Not sure if you keep a record book or not since once you have a proven batch, no need to change it
Nothing that could help in this case unfortunately.
Is this it? I allegedly have it .
If there is no batch number after the letters MCT that is the one.
 
None.

I could quit. There is no way i can be error proof. I check my math. I watch my fill lines. I have zero idea how this happened or how to prevent another occurrence. 100mg is a ton of extra raw. If i left out the BB by accident the stir bar wouldn't rotate so that isn't possible either. Scale error? Who knows.

See above.
i welcome a comparison test and have already said i would treat it as an original test and give the full 200 credit to have it tested again. This of course goes for anyone interested.
I’m definitely not saying to quit lol.

If I had any recommendations I would suggest them but I don’t. I was just wondering if you may have some ideas you think might could help prevent it.

I try learning things from what the successful sources do! That helps me in my quest to keep the shitty sources accountable!
You sir have made very minimal mistakes and set a pretty high standard for sources here. Not only are you doing shit the right way, you are also helping with the knowledge you have that I can pick up on. To where I can learn anything, big or small, that I hope can makes a big difference here.

Hope that makes sense lol.
 
Nothing that could help in this case unfortunately.

If there is no batch number after the letters MCT that is the one.
confirmed no batch number. so this is batch 1 supposedly overdosed @ 400. you want to test it? whats the procedure on that im a infant to that cool stuff level.
 
I’m definitely not saying to quit lol.

If I had any recommendations I would suggest them but I don’t. I was just wondering if you may have some ideas you think might could help prevent it.

I try learning things from what the successful sources do! That helps me in my quest to keep the shitty sources accountable!
You sir have made very minimal mistakes and set a pretty high standard for sources here. Not only are you doing shit the right way, you are also helping with the knowledge you have that I can pick up on. To where I can learn anything, big or small, that I hope can makes a big difference here.

Hope that makes sense lol.
No man i get it. Believe me. Nobody takes this shit more serious than i do. I can make 99 perfect batches and the one i am known for is the bad one. If i had ANY way to prevent fuck ups i would implement it immediately. Like when i went to disposable sterile media and different filtering methods. Changing stoppers then changing back. I am ALWAYS down for improvement no matter the financial cost. Hence the reason i test so much stuff and then release the info even if it is bad. Nothing makes you watch your self like peer judgement. Remember i answer to nobody but the community.

Some guys are like "cool, more mg for my dollar".
Fuck that. The way i see it any fuck up is a black mark. All i can say are meaningless words. I will be more careful. I will test other finished batches. That's the best i can offer.
 
Try the beet root and celery seed extract first. No need to add another prescription medication when there’s a more natural way.

Yeah, smart advice. Amen to that.

You have a booty to kill for. I could never hate you.

So you’re an Extroverted, Sensing, Thinking Perceiver?
Lmao... I'll... take the compliment?

& :rolleyes: That's what those damn tests keep telling me but, one could argue I'm not capable of any of those traits. It's just the handle I use on most of the boards I go on/my 'original' handle, so I've kept to it.

Are you sure about that?
:eek: am I being rused

PSA: Your daily reminder that shredmn is better than AIDS Minerva.

View attachment 111307
Lmao, did you get the prom special?

@estp about hgh, asking around for others experience is always good. The more information you can get before jumping into something is best. Unfortunately it won’t tell you how your own body will respond to things. It’s all pretty much trial and error to see what works best for our own individual goals.

My experience with hgh has been great. My muscles look more full, hair grows fast (on my head, not body thank God! lol) fingernails grow out fast as well. I started at 2ius and went up to 5ius a day before I decided to keep it at 3ius currently.
Body fat loss was noticeable and actually the first thing I did notice when starting. Especially in my midsection. It took about 4 months in before I had any sides with numb fingers and tightness in my hands. Got at it’s worse at 5ius a day for me. Also it was about 4 months in before I noticed the body fat loss and muscle fullness.
As far as skin looking healthier or vibrant I didn’t see any difference. I’m also blasting and cruising so maybe that’s why. Idk.

If your interested in hgh and have the extra money for it I’d say give it a try. I’d suggest to start at 1/2 iu before bed away from food (carbs) or fasted in the Morning for a month then up it to 1iu.

It takes time to see any results. That’s why I think a minimum of 6 months is necessary.
100iu kit would last you over 3 months at 1iu a day. So 2 kits would get you past the 6 month mark and by then you will know if the results are worth the money and if it’s worth it to you to extend your run. You can always bail if you’re not happy with how things are going.

:D Woah, super appreciate the long/thought out post. What you outlined there as a recommendation is more or less the conclusion(s) I had come to with what I'd read on female dosing. Though I'd seen a few places recommending lower cycles, I had always heard the "at least 6 months" (like you are saying) when it comes to male dosing, so I don't fully understand why female would be any different in that regard when you think about it that way...

As for the skin thing - yeah, I had wondered if running HGH alongside a roid cycle wouldn't mitigate the 'skin gain' benefits a little. I do like hearing you're getting hair gains, though. :rolleyes: who doesn't want more of that? (head-wise, at least...!)

The numb hands was something another friend of mine was complaining he also experienced. As long as I can still hold a dumbbell I want to believe I could handle that kind of thing, as annoying as the feeling would be... :oops:

Thank you again so much for your reply on that and listing your own experiences!:)
 
No man i get it. Believe me. Nobody takes this shit more serious than i do. I can make 99 perfect batches and the one i am known for is the bad one. If i had ANY way to prevent fuck ups i would implement it immediately. Like when i went to disposable sterile media and different filtering methods. Changing stoppers then changing back. I am ALWAYS down for improvement no matter the financial cost. Hence the reason i test so much stuff and then release the info even if it is bad. Nothing makes you watch your self like peer judgement. Remember i answer to nobody but the community.

Some guys are like "cool, more mg for my dollar".
Fuck that. The way i see it any fuck up is a black mark. All i can say are meaningless words. I will be more careful. I will test other finished batches. That's the best i can offer.

I agree with you. More is not better in this game. Some of the people running high dosage can’t take an extra 100mg.

As always, appreciate the transparency
 
:rolleyes: So distracted by ass you guys didn't even know I had questions?!

I joke, I joke. I did ask about HGH in that other thread that got derailed by you lot, but I'm really only jesting. No real questions here I'm waiting on, sirs!



Sorry, I have taste.... ;)



Lmao. Actually, in my spare time I LARP as a 375lb dude in my moms basement.

Yes, it is I, @Anthony Minerva

How do you know how to multi-quote already. I’ve been here 3 years and just learned how to do it last week.
 
No man i get it. Believe me. Nobody takes this shit more serious than i do. I can make 99 perfect batches and the one i am known for is the bad one. If i had ANY way to prevent fuck ups i would implement it immediately. Like when i went to disposable sterile media and different filtering methods. Changing stoppers then changing back. I am ALWAYS down for improvement no matter the financial cost. Hence the reason i test so much stuff and then release the info even if it is bad. Nothing makes you watch your self like peer judgement. Remember i answer to nobody but the community.

Some guys are like "cool, more mg for my dollar".
Fuck that. The way i see it any fuck up is a black mark. All i can say are meaningless words. I will be more careful. I will test other finished batches. That's the best i can offer.
Spot on as usual man! Too bad more sources doesn’t have the drive for improvement like you do!

Yeah, smart advice. Amen to that.


Lmao... I'll... take the compliment?

& :rolleyes: That's what those damn tests keep telling me but, one could argue I'm not capable of any of those traits. It's just the handle I use on most of the boards I go on/my 'original' handle, so I've kept to it.


:eek: am I being rused


Lmao, did you get the prom special?



:D Woah, super appreciate the long/thought out post. What you outlined there as a recommendation is more or less the conclusion(s) I had come to with what I'd read on female dosing. Though I'd seen a few places recommending lower cycles, I had always heard the "at least 6 months" (like you are saying) when it comes to male dosing, so I don't fully understand why female would be any different in that regard when you think about it that way...

As for the skin thing - yeah, I had wondered if running HGH alongside a roid cycle wouldn't mitigate the 'skin gain' benefits a little. I do like hearing you're getting hair gains, though. :rolleyes: who doesn't want more of that? (head-wise, at least...!)

The numb hands was something another friend of mine was complaining he also experienced. As long as I can still hold a dumbbell I want to believe I could handle that kind of thing, as annoying as the feeling would be... :oops:

Thank you again so much for your reply on that and listing your own experiences!:)
Yeah sometimes I can’t help myself with the long posts :( I think I get too detailed at times but that’s how I’ve always been lol. I gotta make sure I don’t ramble or repeat myself over and over because I tend to do that as well :oops:
I think that’s why I love a good meme! So much info with less words :D kinda like opposite of me!
Example:
227357D1-03EA-43CA-95AC-C7690BCDEE87.jpeg
I applaud that ass of yours! ;)
:p:D
 
Aren't we all?
:rolleyes: Depends whether you believe that I am secretly Kim, or secretly Anthony...

@estp
You have been a member since 2016 with only a handful of posts. Most of them today. Why hide an ass like that?o_O
Hahaha. I made this account originally to leave a positive comment for Pharmacom since Meso is what made me decide to order from them. I've spent all my years in other forums/places, so I hadn't felt much need to post on meso, I guess? Found myself looking at meso more and more well checking out UGLs this year, so thought I'd jump in finally. Actually tried to sign up and was like "who the heck took my username, that asshole?!" before realizing it was me, I stole my own username and signing into this account.

:oops: I'm not the brightest tool in the sharpest lightbulb shed...

How do you know how to multi-quote already. I’ve been here 3 years and just learned how to do it last week.

:confused: I wish I could claim it was my vast intelligence and wit, but in reality I was just like "hmm, I can quote by replying.. so what do these shiney buttons do?!" and figured it out by accident :p
 
Spot on as usual man! Too bad more sources doesn’t have the drive for improvement like you do!


Yeah sometimes I can’t help myself with the long posts :( I think I get too detailed at times but that’s how I’ve always been lol. I gotta make sure I don’t ramble or repeat myself over and over because I tend to do that as well :oops:
I think that’s why I love a good meme! So much info with less words :D kinda like opposite of me!
Example:
View attachment 111312
I applaud that ass of yours! ;)
:p:D

Haahhaahah, I have the same problem... except I rarely have the sense to filter myself. :eek: so it's just word diarrhea for paragraphs on end from me...

That's why it's better to just stare at the picture and not read my actual posts. :cool:

Nah, I really do appreciate your post, though! I didn't mean it was long in any negative sense. :D
 
@estp pharmacom is good... but at the prices they charge it’s a fucking rip off.
I can agree that you can get quality gear for much lower prices. I think it is kind of like paying for name brand items IRL; you're paying for the name/years of rep, not just the gear.

I am sure TGI has absolutely great stuff, and from what I glanced at the prices he's charging the bare minimum in cost - no greed at all.

I do believe you are a secret. Strong enough for a man, but Ph balanced for a woman?

Lmao, damn. ;) I'll add witty to the list of your praises I am apparently singing.
 
No man i get it. Believe me. Nobody takes this shit more serious than i do. I can make 99 perfect batches and the one i am known for is the bad one. If i had ANY way to prevent fuck ups i would implement it immediately. Like when i went to disposable sterile media and different filtering methods. Changing stoppers then changing back. I am ALWAYS down for improvement no matter the financial cost. Hence the reason i test so much stuff and then release the info even if it is bad. Nothing makes you watch your self like peer judgement. Remember i answer to nobody but the community.

Some guys are like "cool, more mg for my dollar".
Fuck that. The way i see it any fuck up is a black mark. All i can say are meaningless words. I will be more careful. I will test other finished batches. That's the best i can offer.

Man, shit happens. I can only imagine how busy you are with all this and balancing a career with it.

You’re taking the necessary steps to check everything and that speaks volumes. Getting frustrated at yourself over a mistake is a good thing, because it means that you care.

Hopefully someone will send in another sample to Weights and Measure to verify it against Janos results. Just for shits and giggles
 
Back
Top