VenomPharma (Canada/USA Domestic) Sale prices and Free vial of Test Prop

Bro go check out the ARL thread. It’s a perfect example why guys are leary of new members raving about a certain brand/source.
Shills are very real and exist throughout these boards/forums. I encourage all members new and old to post up experiences they have. But by saying that, new members have to understand that if all they have to offer this board is a hollow review and offer nothing else anywhere on the board, then their review isn’t going to hold much weight.
History has shown us how these sources work and how shady they can be and hiring shills is one of the tricks they try to pull.
When members seem like their being really hard on a source or a member that comes across as a shill there are reasons as to why, as I’ve mentioned above.
Everyone should understand, for the most part, the roughness of this board and how things are conducted is justified by how things have transpired in the past.
So look at it from that perspective and maybe it will make more sense to why things are the way they are.

Plain and simple if he doesn’t like “bullies” Meso isn’t for him. He can go to a source board where everyone licks the sources balls and if you don’t or have a bad review you get banned or get bullied for a bad review. Meso is the best board out because the members lookout for one another and hold a source to high standards as they should be.
 
Plain and simple if he doesn’t like “bullies” Meso isn’t for him. He can go to a source board where everyone licks the sources balls and if you don’t or have a bad review you get banned or get bullied for a bad review. Meso is the best board out because the members lookout for one another and hold a source to high standards as they should be.
That’s bullying.
 
I ordered a single vial of tren to see if this guy is legit. If he scams me, no harm done really. I just won't inject it until people start posting labs
 
Hey guys! You're bullying has not scared me off lol. I knew it would happen and very much expected it. I have seen the other threads where a newer source introudces themselves so I do not take it personally.

I told you all I would be back TODAY sorry I did not give a specific time as again, I barely get time off and was very busy today. I do not access this site on my phone for obvious security reasons I need to be home where my whole wifi is set up on its own VPN server built using a raspberry pi (basically a computer the size of a credit card) and my laptop with another VPN

I have received two orders from Meso members, they will get their tracking #'s tomorrow. One posted above.

And trust me my friend, you will love the Tren (and prop) I know looks don't tell everything but it has the nice golden tren ace color. I understand your reasoning for not wanting to pin it right away but I would never sell something that puts you at risk. I just finished a cycle with the exact batch of Tren Ace I am sending you, again, I know these are just words though.

I WILL be posting up the lab soon. I did not go there today but my business partner did. I know, here comes the "bullshit" remarks but my pictures will speak louder than any words. The pill press is an amazing piece of machinery

In terms of brewing, we use Corning brand bottle top filters with a very light vacuum attached as these filters are so fine, it takes forever just for tap water to pass through. The vacuum is super light, it cannot even hold a ping pong ball on the end of the hose. It takes over 24 hours just for filter 500ml through these filters and we triple filter everything... Since they are only 500ml its not like they are super big and cool looking, but, keeping batch sizes small means very easy math when calculating the amount of BA/BB and leaves next to no room for human error and we have many of them so we can brew multiple small batches at a time

You will be impressed with how sterile the room is and our machinery, the brewing stuff is all standard glassware (beakers, measuring cups/vials, glass stir rods and the vacuum filtration) it is much more than a home brewer needs, but its not like we have a room full of glassware as that is not needed. I know you will be impressed though

I think most labs do not mean to under dose but think about it, if you are brewing up a 1/4 kilo or more of raws at one time, you just need to fuck up the solvent/carrier oil % by a small margin and it greatly effects the outcome.

I also have my raw source sending me test results, actual graphs, not just the product name and purity #. Yesterday it was Sunday in China when I heard from them so I will be getting them in about 3-4 hours.

I will also be sending in all my products for testing to Janoshik Labs tomorrow so I have fresh results on everything.
 
Hey guys! You're bullying has not scared me off lol. I knew it would happen and very much expected it. I have seen the other threads where a newer source introudces themselves so I do not take it personally.

I told you all I would be back TODAY sorry I did not give a specific time as again, I barely get time off and was very busy today. I do not access this site on my phone for obvious security reasons I need to be home where my whole wifi is set up on its own VPN server built using a raspberry pi (basically a computer the size of a credit card) and my laptop with another VPN

I have received two orders from Meso members, they will get their tracking #'s tomorrow. One posted above.

And trust me my friend, you will love the Tren (and prop) I know looks don't tell everything but it has the nice golden tren ace color. I understand your reasoning for not wanting to pin it right away but I would never sell something that puts you at risk. I just finished a cycle with the exact batch of Tren Ace I am sending you, again, I know these are just words though.

I WILL be posting up the lab soon. I did not go there today but my business partner did. I know, here comes the "bullshit" remarks but my pictures will speak louder than any words. The pill press is an amazing piece of machinery

In terms of brewing, we use Corning brand bottle top filters with a very light vacuum attached as these filters are so fine, it takes forever just for tap water to pass through. The vacuum is super light, it cannot even hold a ping pong ball on the end of the hose. It takes over 24 hours just for filter 500ml through these filters and we triple filter everything... Since they are only 500ml its not like they are super big and cool looking, but, keeping batch sizes small means very easy math when calculating the amount of BA/BB and leaves next to no room for human error and we have many of them so we can brew multiple small batches at a time

You will be impressed with how sterile the room is and our machinery, the brewing stuff is all standard glassware (beakers, measuring cups/vials, glass stir rods and the vacuum filtration) it is much more than a home brewer needs, but its not like we have a room full of glassware as that is not needed. I know you will be impressed though

I think most labs do not mean to under dose but think about it, if you are brewing up a 1/4 kilo or more of raws at one time, you just need to fuck up the solvent/carrier oil % by a small margin and it greatly effects the outcome.

I also have my raw source sending me test results, actual graphs, not just the product name and purity #. Yesterday it was Sunday in China when I heard from them so I will be getting them in about 3-4 hours.

I will also be sending in all my products for testing to Janoshik Labs tomorrow so I have fresh results on everything.
So how do you keep your room sterile or close to sterile?
 
Hey guys! You're bullying has not scared me off lol. I knew it would happen and very much expected it. I have seen the other threads where a newer source introudces themselves so I do not take it personally.

I told you all I would be back TODAY sorry I did not give a specific time as again, I barely get time off and was very busy today. I do not access this site on my phone for obvious security reasons I need to be home where my whole wifi is set up on its own VPN server built using a raspberry pi (basically a computer the size of a credit card) and my laptop with another VPN

I have received two orders from Meso members, they will get their tracking #'s tomorrow. One posted above.

And trust me my friend, you will love the Tren (and prop) I know looks don't tell everything but it has the nice golden tren ace color. I understand your reasoning for not wanting to pin it right away but I would never sell something that puts you at risk. I just finished a cycle with the exact batch of Tren Ace I am sending you, again, I know these are just words though.

I WILL be posting up the lab soon. I did not go there today but my business partner did. I know, here comes the "bullshit" remarks but my pictures will speak louder than any words. The pill press is an amazing piece of machinery

In terms of brewing, we use Corning brand bottle top filters with a very light vacuum attached as these filters are so fine, it takes forever just for tap water to pass through. The vacuum is super light, it cannot even hold a ping pong ball on the end of the hose. It takes over 24 hours just for filter 500ml through these filters and we triple filter everything... Since they are only 500ml its not like they are super big and cool looking, but, keeping batch sizes small means very easy math when calculating the amount of BA/BB and leaves next to no room for human error and we have many of them so we can brew multiple small batches at a time

You will be impressed with how sterile the room is and our machinery, the brewing stuff is all standard glassware (beakers, measuring cups/vials, glass stir rods and the vacuum filtration) it is much more than a home brewer needs, but its not like we have a room full of glassware as that is not needed. I know you will be impressed though

I think most labs do not mean to under dose but think about it, if you are brewing up a 1/4 kilo or more of raws at one time, you just need to fuck up the solvent/carrier oil % by a small margin and it greatly effects the outcome.

I also have my raw source sending me test results, actual graphs, not just the product name and purity #. Yesterday it was Sunday in China when I heard from them so I will be getting them in about 3-4 hours.

I will also be sending in all my products for testing to Janoshik Labs tomorrow so I have fresh results on everything.

I’d send to Anabolic lab over jano. His name doesn’t sit well with a lot of members.

So I may have read over it or didn’t see, but are you just going to Offer test and tren? Or are you going to carry more oils?
 
This is good. This is what I was talking about before. Your job is to show us everything you can possibly think of to prove you are legitimate. Ideally, you would have been prepared with all that out of the gate and we wouldn’t have wasted time today. But do it ASAP so we don’t lose interest or you don’t look like a scammer dragging his heels as long as possible to collect newbie orders.

If you have any skeletons I’d suggest you air them before the active members root them out. We understand that mistakes get made. It’s how you handle it that’s important. You could have cut that whole Canadian Juice forum thing off and explained it above board. Proactive, never ever reactive.

The AnabolicLab doesn’t give you an Ad or legitimizes you. Since you have no fee to source here it’s a charitable contribution to show us how serious you are to be here. If you donate $500 you are less likely to run off after 2 weeks. It’d be a good thing to continue to donate to over the months that you are here.
Donations and Funding - Anabolic Lab
You will get a little banner under your handle indicating that you contributed. This is viewed as a good thing and helps separate you from the scammers and bathtub brewers.

This board is different than all others.

I did not mention the Canadian Juice Monsters thing as it was nothing serious. I posted there without doing my research (stupid, I know) one of my customers told me it was a great board and since it is for canadians and we are trying to get more Canadian customers I thought it would be a good place to advertise.

It was not even me who posted either, it was my rep. Right after he posted guys who had never even heard of us, never mind ordered started making all these insane claims like first they got an infection, then the ordered again and I took them for their money (I would laugh at this if it was ME posting on there as as if you would order again after getting an infection but my rep started getting upset as he knew they were lies but of course that just made that immature community attack him more.

After I did some research (just google canadian juice monster is a joke/scam. There are even threads on here about it) My suspiciouns were confirmed. The board is owned/run by some big labs (as you can see in the qoute below, Syn pharma being one of them) and any other source that is not working with the mods will get attacked with false claims, if good reviews are posted they delete them and ban the members (I only have that one review up there as my other ones were deleted and long time members who posted them banned and that member was banned for a week after posting it lol)

Cjm is a shit board that is owned by owners of syn pharma. So dont think anything serious from that board. You can start fresh here or on other boards!

But I think you will have hard time becuz very small product selection.

Thank you! I know that board is all just one big front. I should have down my research as there are posts all over google about it and if you try and make a thread on ANY lab the mods don't work with? It instantly is deleted and you are banned. CJM is a joke to the community and the members on there act like 12 year olds and seem to spend all their free time (all day everyday) on there doing nothing but talking shit.


All it takes is 30 minutes of research on the source pages for any noob to see how the vetting process goes. So why the hell are you getting hostile and defensive, acting all caught off guard and flustered when getting asked the hard questions that you should have known were coming your way? It’s like showing up to a job interview not knowing what position you applied for. People actually want to know what’s in the bottles of shit you want us to inject into our bodies? That is a surprise? Come on guy.

Brother, I am not at all getting hostile lol?? I am enjoying all of this! Where am I at all being hostile man? Why are you saying this? I am getting attacked, which I totally expected, and remaining calm cool and collected in my responses. I only got a little upset at the guy claiming storing gear in a Canadian made plastic bin would somehow give him cancer and is less sterile than friggin plastic bags from China. Some people might actually believe that crap if they do not know anything about brewing gear which no newbies do so I am simply telling him he was wrong just like other members did as well.

Sorry if you think I am being a jerk but I am doing everything I can to play nice :)
 
Hey guys! You're bullying has not scared me off lol. I knew it would happen and very much expected it. I have seen the other threads where a newer source introudces themselves so I do not take it personally.

I told you all I would be back TODAY sorry I did not give a specific time as again, I barely get time off and was very busy today. I do not access this site on my phone for obvious security reasons I need to be home where my whole wifi is set up on its own VPN server built using a raspberry pi (basically a computer the size of a credit card) and my laptop with another VPN

I have received two orders from Meso members, they will get their tracking #'s tomorrow. One posted above.

And trust me my friend, you will love the Tren (and prop) I know looks don't tell everything but it has the nice golden tren ace color. I understand your reasoning for not wanting to pin it right away but I would never sell something that puts you at risk. I just finished a cycle with the exact batch of Tren Ace I am sending you, again, I know these are just words though.

I WILL be posting up the lab soon. I did not go there today but my business partner did. I know, here comes the "bullshit" remarks but my pictures will speak louder than any words. The pill press is an amazing piece of machinery

In terms of brewing, we use Corning brand bottle top filters with a very light vacuum attached as these filters are so fine, it takes forever just for tap water to pass through. The vacuum is super light, it cannot even hold a ping pong ball on the end of the hose. It takes over 24 hours just for filter 500ml through these filters and we triple filter everything... Since they are only 500ml its not like they are super big and cool looking, but, keeping batch sizes small means very easy math when calculating the amount of BA/BB and leaves next to no room for human error and we have many of them so we can brew multiple small batches at a time

You will be impressed with how sterile the room is and our machinery, the brewing stuff is all standard glassware (beakers, measuring cups/vials, glass stir rods and the vacuum filtration) it is much more than a home brewer needs, but its not like we have a room full of glassware as that is not needed. I know you will be impressed though

I think most labs do not mean to under dose but think about it, if you are brewing up a 1/4 kilo or more of raws at one time, you just need to fuck up the solvent/carrier oil % by a small margin and it greatly effects the outcome.

I also have my raw source sending me test results, actual graphs, not just the product name and purity #. Yesterday it was Sunday in China when I heard from them so I will be getting them in about 3-4 hours.

I will also be sending in all my products for testing to Janoshik Labs tomorrow so I have fresh results on everything.
Impatiently waiting o_O......................



:D
 
I’d send to Anabolic lab over jano. His name doesn’t sit well with a lot of members.

So I may have read over it or didn’t see, but are you just going to Offer test and tren? Or are you going to carry more oils?

Do you mind PMing me the link for anabolic lab? I wanna use the most trusted lab that you guys like.

We are in the process of producing orals such as Anadrol, Anavar, Clomid, Viagra and Cialis

for oils, we will soon have Masteron and Deca-Durabolin, those are the only other raws we have in stock as we are getting the most requests for those (for oils) what other products would you guys like to see us carry?

We are also making blends such as TNT (test e and tren e) T400, Test Prop/Tren Ace AND Test prop/mast prop/tren ace (some labs have names for these blends but they vary so I am just listing what they will contain)
 
Do you mind PMing me the link for anabolic lab? I wanna use the most trusted lab that you guys like.

We are in the process of producing orals such as Anadrol, Anavar, Clomid, Viagra and Cialis

for oils, we will soon have Masteron and Deca-Durabolin, those are the only other raws we have in stock as we are getting the most requests for those (for oils) what other products would you guys like to see us carry?

We are also making blends such as TNT (test e and tren e) T400, Test Prop/Tren Ace AND Test prop/mast prop/tren ace (some labs have names for these blends but they vary so I am just listing what they will contain)
Anabolic Lab is an organization that does random testing, not sure if you understood that or not - you wouldn’t send your stuff to them to be tested. Jano or W&M will be the easiest to access for your testing.
 
Those lab pics with the nifty tab press better be posted in 2 hours or your time at MESO will expire. We’re about to torch this thread down.

You’re not the first source to drag their ass with requests but we’re not gonna put up with it.

We’ve worked with you and you got a lot of good advice. Now post the fucking pictures. That should have been done earlier today.
 
Anabolic Lab is an organization that does random testing, not sure if you understood that or not - you wouldn’t send your stuff to them to be tested. Jano or W&M will be the easiest to access for your testing.

I didn't think it was until the guy above posted not to go with Jano lol. Thanks for clarifying buddy.

So, is M&M the more reputable one it seems? I guess I should just go with them.
 
Those lab pics with the nifty tab press better be posted in 2 hours or your time at MESO will expire. We’re about to torch this thread down.

You’re not the first source to drag their ass with requests but we’re not gonna put up with it.

We’ve worked with you and you got a lot of good advice. Now post the fucking pictures. That should have been done earlier today.

Man, can you chill? Its a SUNDAY. My day off. Should have been done a lot earlier today? Why? I can't even ship orders on a Sunday and honestly did not expect many people to be on here during the weekend. Now I see how much traffic it gets.

I said they would be posted today which should give me until Midnight my time before you can call me a liar. I am on pacific time, it is not even 3:30PM here

Why do you make the rules? No offense but you keep saying "were/ we" yet you are the only one being so demanding/hostile with this.

You seem to be here 24/7 just to attack attack attack me and I am being friendly and calm towards you. Please, relax man. You will see what I am promising.

I don't think you ever plan to order off me even if my pictures blow you out of the water so why are you acting like this? I bet you have no intention to ever order off me yet I have to post pictures in your 2 hour window and you speak for the whole board on that? Again, I am not at all trying to be rude man. I am just saying you will see what I promised which was to have them done by today I never agreed to do it on your time my friend. I have a life outside of this business, I get 2 days off. Yet, I am here and going to get it done.

It is literally 3:28PM where I am! Maybe you are a few hours ahead but my day is still young.

Sorry my production lab is not in my apartment complex man. It is hours away. I am getting my business partner to go there.

He really, really does not want me posting these pictures, do you have any idea the risk I am taking just to show you this stuff? It actually seems silly, you are the only one being so demanding and I would bet money you have no intention to order off me. I understand you are looking out for the community, but making demands is silly. What if I post the pictures 2 hours and 10 minutes from now? Then I am still a liar? If the pictures get posted today I kept my word brother.

We need to ensure the place is spotless of anything that can identify us. They can even pull fingerprints off of pictures now! They can enhance to see reflections and the whole room is mirrored so my partner is literally going to be wearing a ski mask and then needs to upload the pictures to a computer to enhance it, make sure nothing is visible and black it out if so. Then, take a screenshot of that picture to ensure 100% there is no metadata left on them.

It is a massive risk I am taking, this isn't just some glassware. It is a massive pill press. a 12 head rotary. 14k pills an hour. Not some single punch TDP-5 that costs a grand from China. It is a 12k usd piece of machinery.

and, you know it is capable of making any pill obviously, not just oral steroids and they are targeting people with presses like crazy due to the opioid epidemic which obviously we have nothing to do with and never did/never will but pill presses were 100% legal to import into Canada up until late 2016 when fentanyl started killing people. Now, simple possession of a press with no chemicals near it equals lengthy prison time

Most people would be saying I am foolish as hell to be posting this just to appease some people on a forum but I believe it can be done safely.I am NOT dragging my heels. Again, I am on pacific time. it is not even 3:30PM. Please, just wait and see:)
 
In that thread there were a couple people calling every single person that commented something positive about the gear a “shill” and to pretty much fuck off when they were just commenting there experience whatever it may be. They were nice about it also and the “couple people” just bashed the living shit out of them, for no reason. Why cause they put a positive review in to someone who isn’t liked. It couldn’t of been the gear was legit but the provider was a sketch bag? Nope. Had to bully the shit out of them so yeah, I got mad.i don’t like bullies like I mentioned.

Bro, you had it coming with that feelz report. Anecdotal evidence has it's place, but you went on to say that you could feel the difference between two labs. Unless one of the labs was straight bunk, you were stricken with placebo effect.
 
Back
Top