What needle length for my delts?

[musclesiege]

I've used smaller needles in the past but for convenience, I prefer 23g. Been hitting my quads with 23g for years.

Damn dude, that’s like jabbing a crochet needle into the quad . Great if it works for you though! I follow the same as @bigpoppachump2. I use only 1ml and pin in multiple sites. I like ET 1/2 27g or 5/8 for delts. 1” 27g for cheeks or quads. I rarely do quads mainly just cheeks and ventral is all I need. Does get a little harder at higher doses because you’re pinning 5-7 times per week.

 

[anonymous 524708]

BD 27g precision glide is thin wall, so internal diameter is like a 25g.

I am not sure this is right. The BD website says 27G is still regular wall.

BD conventional needles are known as BD PrecisionGlide™ needles. BD PrecisionGlide™ needle technology incorporates a thin wall, tri-bevel tip and BD micro bonded lubricant which is designed to provide ease of penetration. BD recently streamlined 16G-25G needles to a thin-wall configuration.*

*27G, 30G and 18G blunt filter needles will remain regular wall

Conventional needles | BD Canada

www.bd.com

 

[kain]

I am not sure this is right. The BD website says 27G is still regular wall.

Conventional needles | BD Canada

www.bd.com

It says blunt filter needles. I doubt you’re injecting with those.

 

[Training till failure]

Update:

So I had some of these 0.3ml 31g x 8mm laying about, and seeing as my GHRP-6 arrived today, I mixed 3ml of bac water and pinned around about 200mcg of GHRP-6 in my side delt and seem like I did it right only pinning 0.10ml

 

[Ateam2023]

Update:

So I had some of these 0.3ml 31g x 8mm laying about, and seeing as my GHRP-6 arrived today, I mixed 3ml of bac water and pinned around about 200mcg of GHRP-6 in my side delt and seem like I did it right only pinning 0.10mlView attachment 312628

well i believe you said you have 5 mg vials, so if you added 3 ml bac water to that 5 mg vial, then to get a 200 mcg dose you would have to pull back to .12 ml on your syringe,,,, If your not familiar with it already , download "Peptide calculator " it will all make sense then,,,,

 

[Training till failure]

well i believe you said you have 5 mg vials, so if you added 3 ml bac water to that 5 mg vial, then to get a 200 mcg dose you would have to pull back to .12 ml on your syringe,,,, If your not familiar with it already , download "Peptide calculator " it will all make sense then,,,,

Where's the download?

I tried using one of the websites I normally use, but it's been shut down for some reason

Edit: Just checked and I pinned 170mcg. It's close enough lol

 

[Training till failure]

I didn't realise GHRP-6 increases appetite quickly as I thought there was a build up lol.

I ended up going to the shop 2 times to buy food and tonight I still feel absolutely starving.

I won't be increasing the dosage of this that's for sure, as I wasn't expecting it to be this powerful at such a low dosage.

Now my number 1 peptide lol.

I find this significantly stronger that MK677 and EQ.

Suprised I've never really seen anyone mention it for a bulking cycle as this s#*t is strong asf.

Only way I can explain it is that at first you feel nothing, then you feel a bit hungry, so you make something to eat and feels like it didn't fill you up, then after your food you somehow feel even more hungry and like "wtf I have just eaten" so went to make a 1,000 calorie mass gainer, then felt more hungry and made a bowl of cereal right after, and then I felt like I haven't eaten at all and went over the shop to buy some stuff to make food, eaten that, then felt like I still haven't eaten and went back over to pick up more food.

Still eating now as it feels intense lol.

I can easily see how someone could over eat on this, as I wasn't expecting it to hit so hard.

I should have pinned this in the morning.

 

[Ateam2023]

I didn't realise GHRP-6 increases appetite quickly as I thought there was a build up lol.

I ended up going to the shop 2 times to buy food and tonight I still feel absolutely starving.

I won't be increasing the dosage of this that's for sure, as I wasn't expecting it to be this powerful at such a low dosage.

Now my number 1 peptide lol.

I find this significantly stronger that MK677 and EQ.

Suprised I've never really seen anyone mention it for a bulking cycle as this s#*t is strong asf.

Only way I can explain it is that at first you feel nothing, then you feel a bit hungry, so you make something to eat and feels like it didn't fill you up, then after your food you somehow feel even more hungry and like "wtf I have just eaten" so went to make a 1,000 calorie mass gainer, then felt more hungry and made a bowl of cereal right after, and then I felt like I haven't eaten at all and went over the shop to buy some stuff to make food, eaten that, then felt like I still haven't eaten and went back over to pick up more food.

Still eating now as it feels intense lol.

I can easily see how someone could over eat on this, as I wasn't expecting it to hit so hard.

I should have pinned this in the morning.

Type2 suggested a morning/lunch/dinner schedule so you get the main feedings in , i have some 10 mg vials of ghrp-6 , i have yet to use them , but its good to know a small dose is a good "initial start",,,,,,

 

[Ateam2023]

anyone ever use these nipro needles? I thought 25 g nipro needles came with a blue hub ? i have nipro 25 g 1" in blue hub as well as orange hub?

 

[milkbone]

anyone ever use these nipro needles? I thought 25 g nipro needles came with a blue hub ? i have nipro 25 g 1" in blue hub as well as orange hub?

Medical Needle Types, Sizes, Color-Coding and Uses

A needle is a hollow shaft whose tip is sharp commonly used with a syringe to inject substances into the body or extract samples from the body.

www.medilogbiohealth.com

It depends on the length and type of pin, for example I have 25 ga 1" that are blue, 1.5' that are orange. My 24ga 1" are purple, my Nipro 21ga are gray, likely called black in the ISO standard. I'm 99% sure that Nipro follows ISO, so both can be correct.

BTW OP, I use 24ga 1" in my delts, I have no clue how some guys pin oils with insulin needles, must take 10 minutes to get through. I only use insulin for HCG in my stomach, and they have to be short ones or it's painful as hell.

 

[glpfun]

29g 0.5 inch insulin pin. Easy touch, etc.

17 usd per 100 count.

What are you pinning?

Also with daily injections the volume doesn’t really take that long to fill even with the small gauge, I don’t spend more than a few minutes and I don’t warm my vials.

 

[Keilani]

Sorry man, I hope it's not too bad.

I've been kind of obsessed with avoiding arthritis. The fact is, arthritis ALWAYS has a cause that can be head off if caught quickly enough, despite our acceptance of it as a "normal" part of aging. It's not,

I've been pointing out particles, rubber stopper coring, and all the other crap known to be in injectables, cause a condition called "reactive arthritis". Some guys responded with the typical "I've been pinning for years without filtering and it's no problem.". I wonder where they think all that shit ends up.

Even the sickest patients, or heroin addicts, don't pin as much as we do.

Therefore what's harmless in a handful of shots each year, can do significant damage, cumulatively over the years.

Now I always filter, everything. Half the critics probobly only drink bottled or filtered water, but somehow believe injecting unknown contaminants is harmless.

View attachment 312221View attachment 312222View attachment 312223

Can you put syringe filters to each drawings or injection? Its hard to find Vials in my country, but can get syringe filters

 

[Keilani]

Will something like this work?
I mean for multi vial drawings

Amtech Medical - Monoject Needleless Medical Prep Cannula Box of 100 (8881540111)

The Monoject Smart Tip Needleless Vial Access Cannula is specifically designed to access rubber stopper medication vials. Needleless plastic cannula …

www.amtech.co.nz

 

[Keilani]

Or even one of these, can these be kept at the vial during the duration of the vial?

Amtech Medical - Terumo Unisharp Blunt Fill Filter Needle

Unisharp blunt fill filter needle with a 40° bevel and a thin walled cannula allowing for faster draw up of …

www.amtech.co.nz

 

[anonymous 524708]

It says blunt filter needles. I doubt you’re injecting with those.

The 18G blunt filter needle is regular wall. The 27G and 30G are not blunt filter needles.

Do you really think there is such a thing as a 27G blunt filter needle or a 30G blunt filter needle?

@Ghoul in case you did not see this during your vacation. The BD 27Gs are not thin wall.

 

[kain]

The 18G blunt filter needle is regular wall. The 27G and 30G are not blunt filter needles.

Do you really think there is such a thing as a 27G blunt filter needle or a 30G blunt filter needle?

@Ghoul in case you did not see this during your vacation. The BD 27Gs are not thin wall.

You’re right. I misread it the first time.

 

[Training till failure]

Update:

I can now inject my delts, the ventrogluteal and I can inject into my pecs with no problems at all.

Pinning the chest is definitely my favourite as it doesn't hurt and just feels good to pin.

 

[Ateam2023]

Update:

I can now inject my delts, the ventrogluteal and I can inject into my pecs with no problems at all.

Pinning the chest is definitely my favourite as it doesn't hurt and just feels good to pin.

this response is probably wayy to early for you ,,, but iykyk,,