XENO PHARMACEUTICALS Domestic Source

XENO PHARMACEUTICALS

We are a small start-up domestic source that focuses on quality of products over quantity of products. We will never put out a product we do not have 100% faith in. I will be transparent with everyone as possible while still ensuring safety and security. I will be giving out samples out to any respected board members that send me a request.

In the meantime I would like to get feedback on any test that you would have me or other members perform. We have done melting point tests on our products and all have passed and 100% liquified at the correct temperatures and temperature ranges. We would like to HPLC/MS our raws but would rather have the facility suggested than arbitrarily decide. (Do not want members to feel we may have negotiated a higher percentage test which the facility I know of other sources who have actually done this) LabMax is highly inconclusive and has been proven inaccurate but i will be happy to comply with these tests as well if that is what the members here would like (although melting point is a much better option IMO) Below I will disclose as much information about our company as possible..

Products-


Testosterone Cypionate- 250 40$
Testosterone Propionate- 100 30$
Trenbolone Acetate- 100 60$
Nandrolone Decanoate- 200mg 50$

FREE bottle of our PIP-less test prop on all returning customer orders!

100$ In-store credit and FREE bottle of PIP-less test prop for Blood tests!

100$ Minimum 10$ Shipping Free shipping over 200$

Any products that do not exceed the board standards will be replaced immediately, no questions asked.

We will slowly add more injectables and begin producing orals as we start to make sales and verify the quality of other raw products. (Requests for certain products will be taken into consideration so i would appreciate any and all suggestions we are looking at adding Tren E NPP Dbol and Anavar unless otherwise requested)

Payment/Contact-


A M B R O S I A at C O U N T E R M A I L . C O M

I only accept Western Union at the moment but if demand is high enough for other payment options i will be willing to set up Money Gram as well.

T/A-

Handling will be 2 days unless otherwise specified, if we cannot keep up with volume at any time the board will be notified.

We will only ship through UPS for legal reasons, UPS ground will be standard but we are willing to accommodate for any specific shipping request if you would prefer next day air or select for example.

Product Picture-

See attached..

Raw Manufacturer-


Our main raw manufacturer is a large industrial company that manufacturers APIs, Intermediates and Nutraceuticals. The selection of Testosterone derivatives they have available can only be purchased in kg. Therefore, as we are a brand new company we will only be ordering a limited number of products. All other commonly used sources found on websites such as Made-in-China Alibaba etc. are merely middle-men which we would like to deal with as little as possible.

Brewing Process-


We use pre-sealed sterile vials in order to ensure product sterility, therefore all of our products will not come with the plastic cap over the seal. (This is subject to change, i will let the board no if we begin to sterilize our own vials.) All Carrier Oils used are USP grade and .22 micron filtered, currently our oil of choice is cottonseed oil as it has a much longer shelf life. Gloves, Masks, and disposable lab coats are worn at all times while cooking and distributing the oils to their pre-sealed vials.
We use a low percentage BA-BB cook to keep the hormone in solution. Each batch has its own specific lot number as a means of identifying which batches have and have not been tested and if by some chance a recall is required.

Safety-

All communications will be done through a countermail PGP encrypted email.
All customer information and orders are deleted after product is shipped.
Packaging is discreet and well put together to ensure the package arrives, and arrives intact.

If there is anything I missed or any questions you would like to ask I appreciate any and all feedback and will answer promptly and accurately.

Thank you,
XENO PHARMACEUTICALS
 

Attachments

  • Test Prop.jpg
    Test Prop.jpg
    89.3 KB · Views: 285
XENO PHARMACEUTICALS

We are a small start-up domestic source that focuses on quality of products over quantity of products. We will never put out a product we do not have 100% faith in. I will be transparent with everyone as possible while still ensuring safety and security. I will be giving out samples out to any respected board members that send me a request.

In the meantime I would like to get feedback on any test that you would have me or other members perform. We have done melting point tests on our products and all have passed and 100% liquified at the correct temperatures and temperature ranges. We would like to HPLC/MS our raws but would rather have the facility suggested than arbitrarily decide. (Do not want members to feel we may have negotiated a higher percentage test which the facility I know of other sources who have actually done this) LabMax is highly inconclusive and has been proven inaccurate but i will be happy to comply with these tests as well if that is what the members here would like (although melting point is a much better option IMO) Below I will disclose as much information about our company as possible..

Products-


Testosterone Cypionate- 250 40$
Testosterone Propionate- 100 30$
Trenbolone Acetate- 100 60$
Nandrolone Decanoate- 200mg 50$

FREE bottle of our PIP-less test prop on all returning customer orders!

100$ In-store credit and FREE bottle of PIP-less test prop for Blood tests!

100$ Minimum 10$ Shipping Free shipping over 200$

Any products that do not exceed the board standards will be replaced immediately, no questions asked.

We will slowly add more injectables and begin producing orals as we start to make sales and verify the quality of other raw products. (Requests for certain products will be taken into consideration so i would appreciate any and all suggestions we are looking at adding Tren E NPP Dbol and Anavar unless otherwise requested)

Payment/Contact-


A M B R O S I A at C O U N T E R M A I L . C O M

I only accept Western Union at the moment but if demand is high enough for other payment options i will be willing to set up Money Gram as well.

T/A-

Handling will be 2 days unless otherwise specified, if we cannot keep up with volume at any time the board will be notified.

We will only ship through UPS for legal reasons, UPS ground will be standard but we are willing to accommodate for any specific shipping request if you would prefer next day air or select for example.

Product Picture-

See attached..

Raw Manufacturer-


Our main raw manufacturer is a large industrial company that manufacturers APIs, Intermediates and Nutraceuticals. The selection of Testosterone derivatives they have available can only be purchased in kg. Therefore, as we are a brand new company we will only be ordering a limited number of products. All other commonly used sources found on websites such as Made-in-China Alibaba etc. are merely middle-men which we would like to deal with as little as possible.

Brewing Process-


We use pre-sealed sterile vials in order to ensure product sterility, therefore all of our products will not come with the plastic cap over the seal. (This is subject to change, i will let the board no if we begin to sterilize our own vials.) All Carrier Oils used are USP grade and .22 micron filtered, currently our oil of choice is cottonseed oil as it has a much longer shelf life. Gloves, Masks, and disposable lab coats are worn at all times while cooking and distributing the oils to their pre-sealed vials.
We use a low percentage BA-BB cook to keep the hormone in solution. Each batch has its own specific lot number as a means of identifying which batches have and have not been tested and if by some chance a recall is required.

Safety-

All communications will be done through a countermail PGP encrypted email.
All customer information and orders are deleted after product is shipped.
Packaging is discreet and well put together to ensure the package arrives, and arrives intact.

If there is anything I missed or any questions you would like to ask I appreciate any and all feedback and will answer promptly and accurately.

Thank you,
XENO PHARMACEUTICALS

1. You stole your name from an established pharmaceutical company.. good job. Every great ugl does this, so you're on the right path. :|
2. You have 100% faith in your products but no blood work whatsoever? So you have blind faith... that gives me TONS of confidence in your product.
3. Those fucks at Evo may have been willing to take samples, but any respected member here will not do so.
4. You speak of commonly used raw sources like you've found some off the map source, when in reality you probably just went 2 maybe even 3 pages deep into a google search.
5. You must be pretty fucking new to the biz if you think being a start up and trying to set up shop at MESO was a good idea. You've seemingly unknowingly just walked into the lion's den. As it has been said numerous times, this is where UGLs come to die. My advice is to turn around now and leave while you still have your dignity intact.
 
1. You stole your name from an established pharmaceutical company.. good job. Every great ugl does this, so you're on the right path. :|
2. You have 100% faith in your products but no blood work whatsoever? So you have blind faith... that gives me TONS of confidence in your product.
3. Those fucks at Evo may have been willing to take samples, but any respected member here will not do so.
4. You speak of commonly used raw sources like you've found some off the map source, when in reality you probably just went 2 maybe even 3 pages deep into a google search.
5. You must be pretty fucking new to the biz if you think being a start up and trying to set up shop at MESO was a good idea. You've seemingly unknowingly just walked into the lion's den. As it has been said numerous times, this is where UGLs come to die. My advice is to turn around now and leave while you still have your dignity intact.

I have faith in my products because i use them myself and test all of my raw powder meliting points extensively. The correct hormone and even to some degree the purity of the powder can be determined by the melting point and melting point range. An imperfect crystalline structure will melt at lower temperatue and over a broader range.

I was aware that members taking samples are frowned upon at MESO but i feel not offering them and expecting sales instead is worse.

Not that you should believe any of this but i actually came up with the name on my own, ran a search and saw the mentioned company. I felt this did not matter so i proceeded with branding accordingly.

I'm new to producing commercially but not new to AAS and the interworkings of the individual AAS boards.

Thank you for taking the time to give your opinion i hope i addressed your concerns.

-XENO
 
Ups really get the fuck outa here. Not all vial will have the safety seal on it. Go home troll your drunk.

What are your concerns regarding UPS? Also, if the board would like i can produce my product using unsealed vials that have the flipp tops, but that would be less beneficial to the members in my opinion. Using pre-sealed sterile vials is an extra safety precaution.
 
What are your concerns regarding UPS? Also, if the board would like i can produce my product using unsealed vials that have the flipp tops, but that would be less beneficial to the members in my opinion. Using pre-sealed sterile vials is an extra safety precaution.


If you dont know the problem with ups you shouldnt be in this buisiness.

Do you not have an autoclave?
 
I have faith in my products because i use them myself and test all of my raw powder meliting points extensively. The correct hormone and even to some degree the purity of the powder can be determined by the melting point and melting point range. An imperfect crystalline structure will melt at lower temperatue and over a broader range.

I was aware that members taking samples are frowned upon at MESO but i feel not offering them and expecting sales instead is worse.

Not that you should believe any of this but i actually came up with the name on my own, ran a search and saw the mentioned company. I felt this did not matter so i proceeded with branding accordingly.

I'm new to producing commercially but not new to AAS and the interworkings of the individual AAS boards.

Thank you for taking the time to give your opinion i hope i addressed your concerns.

-XENO

You are unaware of the risk involved with ups. Hmm

You were aware that giving free shit is frowned upon but chose to do it anyway. Hmmm

You magically came up with the same name as a pharm company but thought it didnt matter so you used it anyways. hmmmm

You cant sterilize the vials or gear because you do not have proper equiptment so you remove the safety seal and inject unsterile oil into a sterile vial. Hmmmmm

So what your really trying to say is what your not ready and just dont give a fuck you need some money.
 
You are unaware of the risk involved with ups. Hmm

You were aware that giving free shit is frowned upon but chose to do it anyway. Hmmm

You magically came up with the same name as a pharm company but thought it didnt matter so you used it anyways. hmmmm

You cant sterilize the vials or gear because you do not have proper equiptment so you remove the safety seal and inject unsterile oil into a sterile vial. Hmmmmm

So what your really trying to say is what your not ready and just dont give a fuck you need some money.

I believe it is frowned upon for the members to ask for a free sample? So i chose to offer in-case someone would be willing to take it and write a review.

I dont see the detriment to using the same name as a pharmacuetical company that does not deal in any form of AAS?

The pre-sealed sterile vials do not come with a flip top, and i obviously do not inject unsterile oil. What would be the point of using a sterile vial with unsterile oil?

Gear is never sterilized with an autoclave, an autoclave is used only for lab equipment. .22 micron filter removes all spores and viruses.

Autoclaves are not neccesary to sterilize equipment, its just much quicker and places less stress on an item, but using a presealed vial removes all doubt to begin with.

Thank you,
XENO
 
I have faith in my products because i use them myself and test all of my raw powder meliting points extensively. The correct hormone and even to some degree the purity of the powder can be determined by the melting point and melting point range. An imperfect crystalline structure will melt at lower temperatue and over a broader range.

I was aware that members taking samples are frowned upon at MESO but i feel not offering them and expecting sales instead is worse.

Not that you should believe any of this but i actually came up with the name on my own, ran a search and saw the mentioned company. I felt this did not matter so i proceeded with branding accordingly.

I'm new to producing commercially but not new to AAS and the interworkings of the individual AAS boards.

Thank you for taking the time to give your opinion i hope i addressed your concerns.

-XENO
Hey asshole you aren't welcomed here. Clear enough?
 
If you dont know the problem with ups you shouldnt be in this buisiness.

Do you not have an autoclave?

I do not require signature on packages so im unaware of added risk in regard to UPS. I'm truly interested if you are aware of something i am not but i cant seem to find a problem with their service.

I do not have an autoclave, sterilization can be performed with dry heat or isopropyl alchol as well, regardless i use pre-sealed vials so that sterilization is a non-issue.
 
Hey asshole you aren't welcomed here. Clear enough?

Well, if even one member would like to see what we have to offer, i do not think its your place or anyone elses to decide for them whether im welcome, considering this is an open forum. Im sorry you feel that way, i hope that i can sway you through results and lab testing in the future.

Thank you,
XENO
 
I do not require signature on packages so im unaware of added risk in regard to UPS. I'm truly interested if you are aware of something i am not but i cant seem to find a problem with their service.

I do not have an autoclave, sterilization can be performed with dry heat or isopropyl alchol as well, regardless i use pre-sealed vials so that sterilization is a non-issue.

If you dont know im not going to be the one to tell you

You are not welcome here.

Members beware dirty gear and security risk!
 
If you dont know im not going to be the one to tell you

You are not welcome here.

Members beware dirty gear and security risk!

UPS opens less packages than USPS actually. USPS opens packages at will also, under the pretext of "suspicion" same as UPS.

You are commenting on the sterility of my product when you are unaware that an autoclave is never even used to sterilize oils.

In-fact the chance of my product coming out sterile is MUCH higher than that of a UGL who sterilizes there own vials. It really is a ground-less accusation.
 
It seems you are starting to become unreasonable and editing your posts before i can quote them. Why would you change your statement from "because UPS opens packages at will" to "if you dont know im not going to be the one to tell you"

Im afraid you are just striving for an argument that i will not take part in. I will ignore any further taunting but if you have a legitimate concern you would like an answer to i would be happy to help.

XENO
 
@CensoredBoardsSuck FOR THE LAST TIME I DONT GIVE A FUCK ABOUT ANYONES FREE GEAR!! I AM IN EUROPE U STUPID FUCK SO I ALSO DONT GIVE A FUCK ABOUT DOMESTIC SOURCES. AND THERE ARE PLENTY OF MEMBERS HERE THAT DONT RESPECT UR BITCH ASS EITHER CBS. FUCKING TROLL.
 
I have faith in my products because i use them myself and test all of my raw powder meliting points extensively. The correct hormone and even to some degree the purity of the powder can be determined by the melting point and melting point range. An imperfect crystalline structure will melt at lower temperatue and over a broader range.

I was aware that members taking samples are frowned upon at MESO but i feel not offering them and expecting sales instead is worse.

Not that you should believe any of this but i actually came up with the name on my own, ran a search and saw the mentioned company. I felt this did not matter so i proceeded with branding accordingly.

I'm new to producing commercially but not new to AAS and the interworkings of the individual AAS boards.

Thank you for taking the time to give your opinion i hope i addressed your concerns.

-XENO

Running your product yourself and melting point tests will not be enough. If you are not new to AAS Boards, you should know that only noobs would purchase under such conditions. Given that, it would seem you are either just ignorant and any time you've spent on AAS boards gained you no knowledge on how to properly operate an underground lab, or you are just out to make a quick buck off unsuspecting, and ignorant, new users just looking for anything that will show up at their door step.

Further, if you knew MESO frowned upon samples why would you think that it would be more beneficial than hurtful to go ahead and offer them? It seems unreasonable to make a business move that will be met with overwhelming opposition. Again, you are showing your inability to properly run a business. If your ignorance and inability to brew is even half as great as it is with business, I expect your time as a lab to be quite short lived.
 
Back
Top