• ATTENTION New Members: Please take a few moments to introduce yourself, show your commitment to harm reduction, and chat with the community in the "New Member Introduction" subforum. This will help unlock access to additional forum features and privileges.

MESO-Rx Sponsor Pharmacom Labs officials and our Basicstero.com store

Why you running test PH with primo (enanthate)? Here Test E Or C even will be better, what you think? Also how often you pin your mix?
I received my samples of RAD140 and mk677.

I was taking 30mg of another brands mk677 and feeling fine, i though it was good.

Yesterday i took 30mg of Pharmacoms sample and i cant even feel my feet and hands, fu*** numbness, i dont know if i was taking a fake mk677, if the sample is overdose or it is not even mk677.

When i say it is strong i mean it, my fingers hurt and the numbness is sick.

Right now im on 200mg Test Phenylpropionate and 200mg Primo, taking 30mg mk677 and 7.5ui GH on top.

On 7.5ui Gh and another brand mk677 i wasnt feeling this way, ill keep dose the same a couple of days more and see
 
Anything one should do? Like re-provide mailing info etc? Or is is pretty much on its way?

I assume Frank is handling it since he had the original info. He did not mention anything needs to be done or ask for any inf in his post. If something more is needed, I am sure he will post and ask.

Awesome btw. Also, started the mk677 and appetite is insatiable. Wouldn't describe feeling in hands as tingling or numbness. More like that stiffness you get from gripping weights has increased.

Nice :) sounds like it is working and is strong!
 
Athlete team Pharmacom Labs.

Absolute Сhampion of the South of Russia "Sochi David Cup" 2017.
Absolute Champion of Russia 2017 and 2018.
Absolute Сhampion of the St. Petersburg 2019.
Winner of the Kuwait Pro Qualifier 2019.

27odITzbUEk.jpg
 
Reminder: the Promo is extended until 5th July 2019.

PROMO IS RUNNING FOR ORDERS PAID BY BITCON AND OTHER CRYPTO ONLY!


FREEBIES DEPENDS ON WAREHOUSE YOUR ORDER IS SHIPPED FROM!

If your order is shipped from warehouse 1, you get free bonuses as follows:
products for the value of 50 USD for orders over 200 USD
products for the value of 100 USD for orders over 300 USD

Bonuses are picked up at one of the ordering steps and shipped together with the main order. No promo code is needed. Only products in stock at warehouse 1 will be available for pick up. The entire order is shipped from warehouse 1. In case of seizures only paid items are reshipped.

If your order is shipped from warehouse 2, you get free bonuses as follows:
products for the value of 35 USD for orders over 100 USD
products for the value of 100 USD for orders over 200 USD
products for the value of 200 USD for orders over 300 USD

Bonuses are picked up at one of the ordering steps and shipped together with the main order. No promo code is needed. Only products in stock at warehouse 2 will be available for pick up. The entire order is shipped from warehouse 2. In case of seizures only paid items are reshipped.

Please note, in both cases, in order to be eligible for bonuses mentioned above you should reach those limits mentioned above for your products total only, before shipping. 20$ shipping price is not included. If you ordered products from, e.g. warehouse 2 for the value of 190$ and your order total incl. delivery costs is 210$, you will get only 35$ worth of bonuses. For 100$ worth of bonuses your products total should be 200$ at least and your entire order total incl. delivery will be 220$ in this case. GH does not participate in promo.
 
Sergey Kulaev - PRO athlete team Pharmacom Labs.

Absolute Champion of St. Petersburg 2016.
Absolute Champion of Russia 2016.
Absolute Champion Arnold Classic 2016.

ZXnRQ7lQrvc.jpg
 
You all have a good weekend!
Go get some gains and enjoy :)
I'm going to be lazy and get some rest so hopefully some injuries heal and I can get back on track 100% asap.
 
Reminder: the Promo is extended until 5th July 2019.

PROMO IS RUNNING FOR ORDERS PAID BY BITCON AND OTHER CRYPTO ONLY!


FREEBIES DEPENDS ON WAREHOUSE YOUR ORDER IS SHIPPED FROM!

If your order is shipped from warehouse 1, you get free bonuses as follows:
products for the value of 50 USD for orders over 200 USD
products for the value of 100 USD for orders over 300 USD

Bonuses are picked up at one of the ordering steps and shipped together with the main order. No promo code is needed. Only products in stock at warehouse 1 will be available for pick up. The entire order is shipped from warehouse 1. In case of seizures only paid items are reshipped.

If your order is shipped from warehouse 2, you get free bonuses as follows:
products for the value of 35 USD for orders over 100 USD
products for the value of 100 USD for orders over 200 USD
products for the value of 200 USD for orders over 300 USD

Bonuses are picked up at one of the ordering steps and shipped together with the main order. No promo code is needed. Only products in stock at warehouse 2 will be available for pick up. The entire order is shipped from warehouse 2. In case of seizures only paid items are reshipped.

Please note, in both cases, in order to be eligible for bonuses mentioned above you should reach those limits mentioned above for your products total only, before shipping. 20$ shipping price is not included. If you ordered products from, e.g. warehouse 2 for the value of 190$ and your order total incl. delivery costs is 210$, you will get only 35$ worth of bonuses. For 100$ worth of bonuses your products total should be 200$ at least and your entire order total incl. delivery will be 220$ in this case. GH does not participate in promo.
to receive the promo, we have to sacrifice our loyalty discount and bitcoin discount. cant use our discounts if we decide to get promo items. so its really not a PROMO
 
i just observed at your primo, if you look closely it seems that there are very very tiny "snowflakes". Like looking at a snowball glass. is this the substance? is it normal? i have 4 vials, its the same at all. Its not small bubbles, cause i looked it very carefully.
 
Vladimir Yakovlev - PRO athlete team Pharmacom Labs.

5 times champion of Moscow.
Vice-champion of Russia.
Vice-champion of Europe.
Winner of the Bengalaru India Pro Qualifier.

3GSBx6qmSp8.jpg
 
i just observed at your primo, if you look closely it seems that there are very very tiny "snowflakes". Like looking at a snowball glass. is this the substance? is it normal? i have 4 vials, its the same at all. Its not small bubbles, cause i looked it very carefully.

Sounds like it's crashing. Try warming it up in a heating pad or something similar that doesn't get ridiculously hot, then swirl it around. If they disappear, then you've got hormone that's falling out of solution.

You'll probably want to warm it up before drawing each time, since it may crash again once it cools. One of these will simplify the process and as an added bonus, the oil will thin out and flow much easier when warmed. (Google - coffee mug warmer)

p347610b.jpg
 
Anyone here tried the pharma mix 2 or 6 ?
Also is the pip bad with mix 6 ? 500mg/ml seems painful
 
Last edited:
Anyone here tried the pharma mix 2 or 6 ?
Also is the pip bad with mix 6 ? 500mg/ml seems painful

I have not tried the mixs. I will tell you what I did try and maybe it help you make a guess. But ultimately, only one way to really find out how you personally react to something -- just have to try it.

I have tried high conc. test, eq, deca.
The high concentration EQ and deca had no PIP for me (we are all different though).
But the Test500 at 1cc gave some rough PIP. at 1/2cc still notable.
If I mixed the Test500 1cc in a barrel with 1cc EQ and 1/2cc Deca, leave a little air bubble and turn it up and down over and over so all the oil thoroughly mix, then I had no PIP.

The air was just there so I could get the oils to move around more; of course, before I pinned I let the air go to the top and I pushed it out until a little oil drop went out of the needle.
 
Good advice as usual @MisterSuperGod :)

Sounds like it's crashing. Try warming it up in a heating pad or something similar that doesn't get ridiculously hot, then swirl it around. If they disappear, then you've got hormone that's falling out of solution.

You'll probably want to warm it up before drawing each time, since it may crash again once it cools. One of these will simplify the process and as an added bonus, the oil will thin out and flow much easier when warmed. (Google - coffee mug warmer)

View attachment 113849

@Reno as he mentioned, it is just hormone falling out (re-crystallizing); so those are simply VERY pure crystals of the active agent. Make sure to store oils at room temperature -- cold temperatures will increase chance of re-crystallization.

I've posted this one before. but maybe some new guys will see it and find it helpful so i'll share again.

Bowl of dry rice (I keep the same rice for a long time and reuse) to warm oils to make a smooth fast flow through a small gauge (I have gone as small as a 30g).
Will also work for crashed gear.
Warm up the rice (just rice no vials yet) in the microwave -- get it very warm but not crazy hot blistering hot -- remove from microwave and push vials down into the hot rice to warm the oil. I let it sit for like 5 to 10 mins while I gather other stuff, wipe target site with alcohol, and ready to pin.
imWR72W.jpg


NOTE: clean the top of the vial with alcohol AFTER warming not before because it is being handled. I give vial tops a wipe or two with a sterile alcohol prep pad, let dry, then draw.
 
Primo is a heavy molecule to begin with, that’s why it is normally found at 100mg/ml. It will come out of solution easily. Im not sure how you guys keep the 200mg version in solution at all, especially when shipping it in cold weather. Like you said, just heat it up and it will come back ok.
 
Sounds like it's crashing. Try warming it up in a heating pad or something similar that doesn't get ridiculously hot, then swirl it around. If they disappear, then you've got hormone that's falling out of solution.

You'll probably want to warm it up before drawing each time, since it may crash again once it cools. One of these will simplify the process and as an added bonus, the oil will thin out and flow much easier when warmed. (Google - coffee mug warmer)

View attachment 113849

Good advice as usual @MisterSuperGod :)



@Reno as he mentioned, it is just hormone falling out (re-crystallizing); so those are simply VERY pure crystals of the active agent. Make sure to store oils at room temperature -- cold temperatures will increase chance of re-crystallization.

I've posted this one before. but maybe some new guys will see it and find it helpful so i'll share again.

Bowl of dry rice (I keep the same rice for a long time and reuse) to warm oils to make a smooth fast flow through a small gauge (I have gone as small as a 30g).
Will also work for crashed gear.
Warm up the rice (just rice no vials yet) in the microwave -- get it very warm but not crazy hot blistering hot -- remove from microwave and push vials down into the hot rice to warm the oil. I let it sit for like 5 to 10 mins while I gather other stuff, wipe target site with alcohol, and ready to pin.
imWR72W.jpg


NOTE: clean the top of the vial with alcohol AFTER warming not before because it is being handled. I give vial tops a wipe or two with a sterile alcohol prep pad, let dry, then draw.
You are the best guys. I will try this. Is this possible to do it with a hairdryer?
Can this be done with winstrol too?
Also i have another question cause i see that you are very informed, give me your knowledge. I have a 10ml vial of sustanon , stored in a dry place but its over a year now. I only used it once.(expiration day is at 2020) I draw only one time and then never used it. Is it safe to use this vial? Cause i opened it and i saw on the rubber top a small liquid drop on the place i once pinned the needle.
 
You are the best guys. I will try this. Is this possible to do it with a hairdryer?
Can this be done with winstrol too?
Also i have another question cause i see that you are very informed, give me your knowledge. I have a 10ml vial of sustanon , stored in a dry place but its over a year now. I only used it once.(expiration day is at 2020) I draw only one time and then never used it. Is it safe to use this vial? Cause i opened it and i saw on the rubber top a small liquid drop on the place i once pinned the needle.

A hair dryer will suffice, just don't get carried away with it. If the vial is uncomfortably hot in your hands, then let it cool a little before drawing. Injecting hot oil will seriously ruin your day.

Your stored gear should still be fine, my only concern would be the stopper itself, because they can eventually become brittle.

Do your typical sterilization routine on the vial before drawing, then once you've loaded the syringe, inspect the vial, the stopper and the filled syringe. If the stopper has broken down, it will leave small black or grey bits behind. In which case, trash it and don't look back.
 
Top