A guide line for all new members?

Thank you pumping iron I've been doing my own research for a while now, but this is very informative. You see, I'm turning 27 and I have low t, and am in the process of getting diagnosed and perhaps receiving treatment, but that's a big maybe for me because my life is becoming increasingly unmanageable. I've had to take drugs for a while in the past just to work and function because I have no energy to do anything and I have a friend who also has low t and got treated by a doctor with test cypo and it changed his life. I've been a wrestler since first grade and have been working out my whole life, just not as hard since college. It is extremely difficult for me to put on any weight I just get really ripped up the more I work out. The more I read the more I want this just to live a normal active life like I used to, I definitely wouldn't mind being able to put on some weight either, for me there is no down side, not anymore. I know I'm new to the forum so I'll happily prove myself to you in any way that you wish, to show you I am who I say I am. Whatever it takes, this is no way for a young man to live. Thank you in advance.


Also a lifelong wrestler.
I have a question though. Did you endure many rigorous weight cuts early in life(pre puberty)?

Have you done excessive amounts of cardio while avoiding explosive movements? That can lead to low test.

As a child my father(a collegiate wrestler) would always have me run hill sprints or drag a tire while the other kids jogged endlessly.
He slowly integrated longer cardio jogs and bike rides into our nightly exercise routine.

In the end I powered right through my Achilles' tendon in football tho...
 
Front-Loading” is a method used to build up the level of long-estered compounds in ones bloodstream without waiting the usual 4-6 weeks that is typical for long esters to stabilize in the blood. When front-loading, you will Double up your wanted dosage during the first week (or 2 weeks depending on ester (EQ)) . Let’s take Test Cypionate for example (7-9 day half-life). For this example we’ll generalize Cyp to a 7 day half-life (1 Week). Say you wanted to run 600mg (2cc using 300mg/ml) Test Cyp a week, you would do something like this:

Following a ONE INJECTION PER WEEK Protocol (Not Typical at these dosages, Just easier to explain/understand)

Week 1: 1200mg (First Injection); Blood levels at end of week: 600mg
Week 2: 600mg (Left from half-life of week 1) + 600mg (New Injection); Blood levels at end of week: 600mg
Week 3: 600mg (Left from combined half lives of Week 1 and 2) + 600mg (New Injection); Blood levels at end of week: 600mg
Week 4: 600mg (Left from combined Half lives of Week 1, 2, and 3) + 600mg (New Injection); Blood levels at end of week: 600mg

By doubling your dose the first week, you are stabilizing your blood levels at your wanted dosage after 1 week instead of waiting the usual 4-6 weeks. This would be most effective for someone who wants to run long esters but does not want to wait for the compound to build up in their system.

Using a “Kicker” is kick starting your cycle by incorporating the use of a short ester compound to bring blood levels up to wanted levels while waiting for the long ester to take hold. For this example, we’ll use Test P as a Kicker for Test E. While waiting for the Enanthate ester to fully stabilize at wanted levels, you would incorporate the use of Test P during the first 4 weeks of a cycle. Something like this:

Week 1: Test P 150mg EOD, Test E 600mg EW (2x300mg)
Week 2: Test P 150mg EOD, Test E 600mg EW (2x300mg)
Week 3: Test P 150mg EOD, Test E 600mg EW (2x300mg)
Week 4: Test P 150mg EOD, Test E 600mg EW (2x300mg)
Week 5: DROP Test P, Continue with Test E 600mg EW

Using this method, the Test P will bring your blood levels up to wanted level “instantly” compared to waiting the usual 4-6 weeks for the long esters to kick in.

As I stated, I have seen a bit of confusion on the 2 methods lately. Although, in essence, they are both doing the same thing to your blood levels, they are 2 very different methods in themselves. Hopefully this was informative to some of ya’ll. This was written strictly off of my knowledge. Any concern or criticism is greatly appreciated. We’re all learning here. Thanks
This is nice article I found.
 
Front-Loading” is a method used to build up the level of long-estered compounds in ones bloodstream without waiting the usual 4-6 weeks that is typical for long esters to stabilize in the blood. When front-loading, you will Double up your wanted dosage during the first week (or 2 weeks depending on ester (EQ)) . Let’s take Test Cypionate for example (7-9 day half-life). For this example we’ll generalize Cyp to a 7 day half-life (1 Week). Say you wanted to run 600mg (2cc using 300mg/ml) Test Cyp a week, you would do something like this:

Following a ONE INJECTION PER WEEK Protocol (Not Typical at these dosages, Just easier to explain/understand)

Week 1: 1200mg (First Injection); Blood levels at end of week: 600mg
Week 2: 600mg (Left from half-life of week 1) + 600mg (New Injection); Blood levels at end of week: 600mg
Week 3: 600mg (Left from combined half lives of Week 1 and 2) + 600mg (New Injection); Blood levels at end of week: 600mg
Week 4: 600mg (Left from combined Half lives of Week 1, 2, and 3) + 600mg (New Injection); Blood levels at end of week: 600mg

By doubling your dose the first week, you are stabilizing your blood levels at your wanted dosage after 1 week instead of waiting the usual 4-6 weeks. This would be most effective for someone who wants to run long esters but does not want to wait for the compound to build up in their system.

Using a “Kicker” is kick starting your cycle by incorporating the use of a short ester compound to bring blood levels up to wanted levels while waiting for the long ester to take hold. For this example, we’ll use Test P as a Kicker for Test E. While waiting for the Enanthate ester to fully stabilize at wanted levels, you would incorporate the use of Test P during the first 4 weeks of a cycle. Something like this:

Week 1: Test P 150mg EOD, Test E 600mg EW (2x300mg)
Week 2: Test P 150mg EOD, Test E 600mg EW (2x300mg)
Week 3: Test P 150mg EOD, Test E 600mg EW (2x300mg)
Week 4: Test P 150mg EOD, Test E 600mg EW (2x300mg)
Week 5: DROP Test P, Continue with Test E 600mg EW

Using this method, the Test P will bring your blood levels up to wanted level “instantly” compared to waiting the usual 4-6 weeks for the long esters to kick in.

As I stated, I have seen a bit of confusion on the 2 methods lately. Although, in essence, they are both doing the same thing to your blood levels, they are 2 very different methods in themselves. Hopefully this was informative to some of ya’ll. This was written strictly off of my knowledge. Any concern or criticism is greatly appreciated. We’re all learning here. Thanks
This is nice article I found.
Great contribution here. Newbies would be wise to follow.
 
While being new to this site but not so new to what is being talked about. This is awesome. I appreciate the time and effort some put into this site to keep fellow members educated and safe.
 
Front-Loading” is a method used to build up the level of long-estered compounds in ones bloodstream without waiting the usual 4-6 weeks that is typical for long esters to stabilize in the blood. When front-loading, you will Double up your wanted dosage during the first week (or 2 weeks depending on ester (EQ)) . Let’s take Test Cypionate for example (7-9 day half-life). For this example we’ll generalize Cyp to a 7 day half-life (1 Week). Say you wanted to run 600mg (2cc using 300mg/ml) Test Cyp a week, you would do something like this:

Following a ONE INJECTION PER WEEK Protocol (Not Typical at these dosages, Just easier to explain/understand)

Week 1: 1200mg (First Injection); Blood levels at end of week: 600mg
Week 2: 600mg (Left from half-life of week 1) + 600mg (New Injection); Blood levels at end of week: 600mg
Week 3: 600mg (Left from combined half lives of Week 1 and 2) + 600mg (New Injection); Blood levels at end of week: 600mg
Week 4: 600mg (Left from combined Half lives of Week 1, 2, and 3) + 600mg (New Injection); Blood levels at end of week: 600mg

By doubling your dose the first week, you are stabilizing your blood levels at your wanted dosage after 1 week instead of waiting the usual 4-6 weeks. This would be most effective for someone who wants to run long esters but does not want to wait for the compound to build up in their system.

Using a “Kicker” is kick starting your cycle by incorporating the use of a short ester compound to bring blood levels up to wanted levels while waiting for the long ester to take hold. For this example, we’ll use Test P as a Kicker for Test E. While waiting for the Enanthate ester to fully stabilize at wanted levels, you would incorporate the use of Test P during the first 4 weeks of a cycle. Something like this:

Week 1: Test P 150mg EOD, Test E 600mg EW (2x300mg)
Week 2: Test P 150mg EOD, Test E 600mg EW (2x300mg)
Week 3: Test P 150mg EOD, Test E 600mg EW (2x300mg)
Week 4: Test P 150mg EOD, Test E 600mg EW (2x300mg)
Week 5: DROP Test P, Continue with Test E 600mg EW

Using this method, the Test P will bring your blood levels up to wanted level “instantly” compared to waiting the usual 4-6 weeks for the long esters to kick in.

As I stated, I have seen a bit of confusion on the 2 methods lately. Although, in essence, they are both doing the same thing to your blood levels, they are 2 very different methods in themselves. Hopefully this was informative to some of ya’ll. This was written strictly off of my knowledge. Any concern or criticism is greatly appreciated. We’re all learning here. Thanks
This is nice article I found.
printing this because i wanna run test tren eq cycle and wanna front load the test and eq , tren is gonna be finaplix at 100mg ed if i can handle it and test will be sustanon 300mg and test e 300 so thanks brother with kicker dbol ive read alot bout front loading but this is what i been needing
 
Front-Loading” is a method used to build up the level of long-estered compounds in ones bloodstream without waiting the usual 4-6 weeks that is typical for long esters to stabilize in the blood. When front-loading, you will Double up your wanted dosage during the first week (or 2 weeks depending on ester (EQ)) . Let’s take Test Cypionate for example (7-9 day half-life). For this example we’ll generalize Cyp to a 7 day half-life (1 Week). Say you wanted to run 600mg (2cc using 300mg/ml) Test Cyp a week, you would do something like this:

Following a ONE INJECTION PER WEEK Protocol (Not Typical at these dosages, Just easier to explain/understand)

Week 1: 1200mg (First Injection); Blood levels at end of week: 600mg
Week 2: 600mg (Left from half-life of week 1) + 600mg (New Injection); Blood levels at end of week: 600mg
Week 3: 600mg (Left from combined half lives of Week 1 and 2) + 600mg (New Injection); Blood levels at end of week: 600mg
Week 4: 600mg (Left from combined Half lives of Week 1, 2, and 3) + 600mg (New Injection); Blood levels at end of week: 600mg

By doubling your dose the first week, you are stabilizing your blood levels at your wanted dosage after 1 week instead of waiting the usual 4-6 weeks. This would be most effective for someone who wants to run long esters but does not want to wait for the compound to build up in their system.

Using a “Kicker” is kick starting your cycle by incorporating the use of a short ester compound to bring blood levels up to wanted levels while waiting for the long ester to take hold. For this example, we’ll use Test P as a Kicker for Test E. While waiting for the Enanthate ester to fully stabilize at wanted levels, you would incorporate the use of Test P during the first 4 weeks of a cycle. Something like this:

Week 1: Test P 150mg EOD, Test E 600mg EW (2x300mg)
Week 2: Test P 150mg EOD, Test E 600mg EW (2x300mg)
Week 3: Test P 150mg EOD, Test E 600mg EW (2x300mg)
Week 4: Test P 150mg EOD, Test E 600mg EW (2x300mg)
Week 5: DROP Test P, Continue with Test E 600mg EW

Using this method, the Test P will bring your blood levels up to wanted level “instantly” compared to waiting the usual 4-6 weeks for the long esters to kick in.

As I stated, I have seen a bit of confusion on the 2 methods lately. Although, in essence, they are both doing the same thing to your blood levels, they are 2 very different methods in themselves. Hopefully this was informative to some of ya’ll. This was written strictly off of my knowledge. Any concern or criticism is greatly appreciated. We’re all learning here. Thanks
This is nice article I found.
tnanks bro
 
If this is a great thread worthy enough of a sticky maybe it should be stickied.
 
Back
Top