MESO-Rx Sponsor Axle Labs - US Domestic

[FastBun]

Look Ma, Axle still doesn't test his raws.

But why would he… look how good his numbers are!!
Test-E (250mg/mL) -> 275.74 mg/mL
Mast-P (100mg/mL) -> 112.68 mg/mL
Pfff… a blind infant could probably tip the raws over and be more accurate…

Also… he keeps acting stupid and rephrasing your question… he keeps ignoring what you are asking in regards to heavy metals being stuck… he acts stupid and claims he doesn’t use a metal stir rod…

 

[FastBun]

You have never observed any metal particles on the stirrer bar at the conclusion of your 0.5 or 1 L batches similar to what was shared in the picture from the other vendor and another picture shared by a member?

lol you really think he pays attention to that considering his brewing practices and test results???

 

[Axle Labs]

You have never observed any metal particles on the stirrer bar at the conclusion of your 0.5 or 1 L batches similar to what was shared in the picture from the other vendor and another picture shared by a member?

I truly have not. If I just didn’t notice that, it’s possible but I feel I would have noticed that since it would stay on the stirrer if it was a metal particle.

If it didn’t stay on it, it would get caught in filters.

Regardless, we’re asking for both sterility and metals testing, like I said. It seems the demand for metals testing is low but we’ll do a metals test on a compound.

 

[readalot]

I truly have not. If I just didn’t notice that, it’s possible but I feel I would have noticed that since it would stay on the stirrer if it was a metal particle.

If it didn’t stay on it, it would get caught in filters.

Regardless, we’re asking for both sterility and metals testing, like I said. It seems the demand for metals testing is low but we’ll do a metals test on a compound.

I can believe this. The vendor who shared the pics mentioned he didn't start to notice the particles until he scaled up batches to higher than 500 g of raw. 750-1000 g of raw they were very noticeable for Test E and Test C.

Correct, the metal particles would only be issue for orals / unfiltered products using raws.

 

[Axle Labs]

I can believe this. The vendor who shared the pics mentioned he didn't start to notice the particles until he scaled up batches to higher than 500 g of raw. 750-1000 g of raw they were very noticeable for Test E and Test C.

Correct, the metal particles would only be issue for orals / unfiltered products using raws.

Gotcha. No unfiltered oils being sold on our end.

Orals, we’ll do a metals test.

 

[readalot]

Gotcha. No unfiltered oils being sold on our end.

Orals, we’ll do a metals test.

If you want to isolate the metals for ID, you have to have a way to separate them. It appears they are heterogenous and at low concentration in the raws so that's where the efficient method of separating them in the oil batches magnetically comes in handy.

Their yield is dependent on raw amount. You won't be able to pick them up via Jano's test by sending in a raw powder sample he ask for. If you ever scale up and see the magnetically captured particles. Put them in a vial, send out and then Jano may be able to analyze what they are.

 

[Axle Labs]

If you want to isolate the metals for ID, you have to have a way to separate them. It appears they are heterogenous and at low concentration in the raws so that's where the efficient method of separating them in the oil batches magnetically comes in handy.

Their yield is dependent on raw amount. You won't be able to pick them up via Jano's test by sending in a raw powder sample he ask for. If you ever scale up and see the magnetically captured particles. Put them in a vial, send out and then Jano may be able to analyze what they are.

Thanks for the info. If I ever notice the particles, I’ll be sure to collect and send.

 

[readalot]

@Axle Labs

D

MESO-Rx Sponsor Post in thread 'GenericAsia - International & US Domestic'

Sunday at 8:20 PM

I am still here guys dont worry!!

Gonna make some crazy promo with peptides very soon !!

Hey Marcus,

How about heading over to the St Jude’s thread and donating for the children??
Don’t ignore this one. You can respond with a donation or say Fuk Off. But either way it’s at least a response……

• Dkland

• 
• 

 

[Axle Labs]

@Axle Labs

D

MESO-Rx Sponsor Post in thread 'GenericAsia - International & US Domestic'

Sunday at 8:20 PM

I am still here guys dont worry!!

Gonna make some crazy promo with peptides very soon !!

Hey Marcus,

How about heading over to the St Jude’s thread and donating for the children??
Don’t ignore this one. You can respond with a donation or say Fuk Off. But either way it’s at least a response……

• Dkland

• 
• 

Won't let me post in that thread, but thanks for the link!

 

[SwolieGuacamole]

Look at this guy

 

[readalot]

Post in thread 'Donating to St. Jude's'

Sunday at 10:55 PM

@Axle Labs making it happen.


Well done Axle. Thank you.

And awesome work reaching out to the vendors @Dkland. Great idea.

• readalot

• 
• 

Way to show up @Axle Labs. Awesome!

 

[readalot]

Look at this guy

There's put up or shut up. He put up!

 

[SwolieGuacamole]

Solid deal @Axle Labs

 

[bigMoJo]

Looks like Axle is getting after it.

@Axle Labs
Means a lot to your customers... means the world to those kids.

Way to show up!

Happy New Year Sir!

 

[Axle Labs]

Looks like Axle is getting after it.

@Axle Labs
Means a lot to your customers... means the world to those kids.

Way to show up!

Happy New Year Sir!

Happy New Year!

Of course, happy to help in any way.

 

[ivandragovich]

Post in thread 'Donating to St. Jude's'

Sunday at 10:55 PM

@Axle Labs making it happen.


Well done Axle. Thank you.

And awesome work reaching out to the vendors @Dkland. Great idea.

• readalot

• 
• 

Way to show up @Axle Labs. Awesome!

Now if he also delivers the testing results as promised… I might actually reconsider my stance on ordering again.

This is very noble, but, let’s not let it sway us from the reason why we are all here in the first place.

Axle, hopefully some good Karma will fly your way for this, we could all use some of those positive energies.

 

[Axle Labs]

Now if he also delivers the testing results as promised… I might actually reconsider my stance on ordering again.

This is very noble, but, let’s not let it sway us from the reason why we are all here in the first place.

Axle, hopefully some good Karma will fly your way for this, we could all use some of those positive energies.

Thank you! Yes, those sterility tests are coming.

 

[Axle Labs]

More testing results!
Waiting on orals results, should be in soon too.

Sterility testing coming soon too! Stay tuned.

Tren-E (400mg/mL) -> 420.46 mg/mL
TNE (100mg/mL) -> 105.44 mg/mL
Test-C (200mg/mL) -> 201.44 mg/mL
Test-E (250mg/mL) -> 275.74 mg/mL (will scale back overdose ~5%)
Mast-P (100mg/mL) -> 112.68 mg/mL (will scale back overdose ~5%)View attachment 310272View attachment 310273View attachment 310274View attachment 310275

View attachment 310271

Orals testing results:

Anavar (20mg) -> 23.97mg average (Will scale back 10%)
Anadrol (50mg) -> 57.68mg average
Winstrol (25mg) -> 30.53mg average (Will scale back 15%)
Cialis(10mg) -> 9.31mg (Will increase raws 10%)

 

[readalot]

Orals testing results:

Anavar (20mg) -> 23.97mg average (Will scale back 10%)
Anadrol (50mg) -> 57.68mg average
Winstrol (25mg) -> 30.53mg average (Will scale back 15%)
Cialis(10mg) -> 9.31mg (Will increase raws 10%)

View attachment 311057View attachment 311058View attachment 311059View attachment 311060

Test those raws and you'd upgrade big time when yoh get new stock. Showcase your brewing skills.

 

[Axle Labs]

We will be taking a little break starting January 15th to spend some time with our families and also cool off volume a bit. Just a safety precaution.

We will still be posting any testing results that come in while we’re closed!