BrewPorn

[Blakeyy]

Cant you just get these items and start brewing? Of course the initial cost would be higher than what you would spend on a few syringe filters but when producing severel hundreds of ml's of different compounds wouldn't this be the better solution, or is there somewhere a problem with how sterile it would be?

Ye the first item you sent that’s the type of thing I was thinking of getting something like that and just using a hand pump and just wash after using and change the filter membrane

 

[LordSamuilo]

Cant you just get these items and start brewing? Of course the initial cost would be higher than what you would spend on a few syringe filters but when producing severel hundreds of ml's of different compounds wouldn't this be the better solution, or is there somewhere a problem with how sterile it would be

Like i said i use both , and i know a few other guys that use both ... the thing is if your gonna do one big brew every once in a blue moon then obviously a bottle system w/ a vacuum pump is the way to go ...

I can only speak for my self , but i still use syringe filters for smaller brews because my bottle filter system isnt something i can just leave sitting out on the kitchen table . So if im brewing different shit every week its just a pain in the ass to set up and break down your bottles and vacuum pump all the time when you can just blow out a couple hundred ml's through a syringe in a half hour once you get good at it ...

So it really just depends on what your brewing and how often , hell depending on how much im brewing , ill having the bottle filter rolling at the same time im hand filtering just to get the shit done faster lol ...

 

[LordSamuilo]

Just messing around with some stuff today and brewed up some 40mg/ml injectable superdrol ...

40mg/ml @ 25ml
-1 gram of raw sdrol
-2ml guai
- .25ml ba (.6%)
- 5ml BB ( 20%)
-16.80 ML miglyol

holds easy , may not even need the guaiacol honestly ... dont know how its pins , and im not ever gonna use it probably , but if someone wants use the recipe and give it a try its an easy brew. .

waiting on some raws to land but ill post up couple cool recipes im gonna try this week once i test them and see how they hold ...

-anadrol/superdrol blend
-TNE/TRne/mtren
- test p/ tren a / npp blend

Are 3 ill be for sure posting up later this week (depending how well they work) ...

 

[XmadXscientist]

Just messing around with some stuff today and brewed up some 40mg/ml injectable superdrol ...

I’ve been wanting to make this but one time my ingredients were forgotten and the other time they were out. Thanks for the recipe!

 

[LordSamuilo]

I’ve been wanting to make this but one time my ingredients were forgotten and the other time they were out. Thanks for the recipe!

No problem brother , its only been a couple hours but it doesnt seem like its gonna crash ... it basically went into solution as soon as i added the guai so it seems really stable , pretty much reacted just like my dbol brew ...

 

[tandd6]

Just messing around with some stuff today and brewed up some 40mg/ml injectable superdrol ...

40mg/ml @ 25ml
-1 gram of raw sdrol
-2ml guai
- .25ml ba (.6%)
- 5ml BB ( 20%)
-16.80 ML miglyol

holds easy , may not even need the guaiacol honestly ... dont know how its pins , and im not ever gonna use it probably , but if someone wants use the recipe and give it a try its an easy brew. .

waiting on some raws to land but ill post up couple cool recipes im gonna try this week once i test them and see how they hold ...

-anadrol/superdrol blend
-TNE/TRne/mtren
- test p/ tren a / npp blend

Are 3 ill be for sure posting up later this week (depending how well they work) ...

So why add the guaiacol?Just asking cause I'm starting to get supplies to start brewing my self

 

[LordSamuilo]

So why add the guaiacol?Just asking cause I'm starting to get supplies to start brewing my self

Because generally an injectable oral will need some amount of guaiacol or at the very least a high percentage of benzyl benzoate to get it to hold .. ive never brewed superdrol so i was starting with a recipe i knew would most likely hold ...

if i experiment with it more ill dial back the solvent slowly on future brews until i find the point it will no longer hold at .

Its just easier doing it this way then going to light on solvent in the beginning , and then tweaking it and fighting it back into solution and keeping track of all your adjustments ..

Edit: also some people opt for using a ton of BB in these oral and suspension brews , i just prefer using a smaller amount guaiacol in them and being done with it ... some people dont like guaiacol or ethyl oleate , I dont mind either of them in my brews so im pretty liberal with them ... its all really just your personal preference ...

 

[Blakeyy]

Some test e cooked up and it’s crystal clear this time used bottle top filter 300mg per ml gonna make some mast e in about an hour

 

[Blakeyy]

For making mast e 200mg per ml 1% ba 18% B.B. is that a good protocol for it am new to this and only made test e before

 

[Ray9]

For making mast e 200mg per ml 1% ba 18% B.B. is that a good protocol for it am new to this and only made test e before

18% will work at 200. You could use less. I've used 15% it would probably work a little less than 15 honestly

 

[tandd6]

Because generally an injectable oral will need some amount of guaiacol or at the very least a high percentage of benzyl benzoate to get it to hold .. ive never brewed superdrol so i was starting with a recipe i knew would most likely hold ...

if i experiment with it more ill dial back the solvent slowly on future brews until i find the point it will no longer hold at .

Its just easier doing it this way then going to light on solvent in the beginning , and then tweaking it and fighting it back into solution and keeping track of all your adjustments ..

Edit: also some people opt for using a ton of BB in these oral and suspension brews , i just prefer using a smaller amount guaiacol in them and being done with it ... some people dont like guaiacol or ethyl oleate , I dont mind either of them in my brews so im pretty liberal with them ... its all really just your personal preference ...

Cool, I guess when I finally do start brewing I'll start to figure out the when's and the when not to's . I'll have to had the guai to the list of supplies, for such occasions.

 

[Blakeyy]

18% will work at 200. You could use less. I've used 15% it would probably work a little less than 15 honestly

Thanks ye I’ll try %15 on my next run went with %18 yday can’t wait for my next cycle to try all this stuff

 

[Murho]

First attemeot at brewing - just did 20ml of Test E at 250mg/ml. Will see how it goes pinning tomorrow.

 

[Murho]

Will see how it goes pinning tomorrow.

I was a littler nervous trying my home brewed, but injecting was very smooth and easy. A little sore 24 hours later, but not as bad as the UGL stuff I had been using.

 

[TRT]

Some test e cooked up and it’s crystal clear this time used bottle top filter 300mg per ml gonna make some mast e in about an hour

How long did it take with the bottle top filter?

 

[XmadXscientist]

How long did it take with the bottle top filter?

With the bottletops from the site I posted I can knock out 2-400ml in 15minutes or less. They filter better than the non sterile ones

 

[TRT]

With the bottletops from the site I posted I can knock out 2-400ml in 15minutes or less. They filter better than the non sterile ones

I'm assuming your talking about the sterile ones then. Ok. Cool. Just trying to find the quickest yet safest way to brew a large amount. Thanks.

 

[XmadXscientist]

I'm assuming your talking about the sterile ones then. Ok. Cool. Just trying to find the quickest yet safest way to brew a large amount. Thanks.

https://ezvialz.com/whatman-zapcap-filters/757-whatman-sterile-zapcap-10443430.html

These are what I’m using.

 

[grey]

https://ezvialz.com/whatman-zapcap-filters/757-whatman-sterile-zapcap-10443430.html

These are what I’m using.

You cool kids and your vacuum pumps...

I has an envy.

 

[SmallWoody]

First attemeot at brewing - just did 20ml of Test E at 250mg/ml. Will see how it goes pinning tomorrow.


View attachment 78006 View attachment 78007

how would you know it's not 150-200 mg a ml