Sometimes you can't reach it. Usually is back up after a few hours. Maybe maintenance.
MESO-Rx
Anabolic Steroids
MESO-Rx Sponsor HilmaBiocare Official
- Thread starter HilmaBiocare
- Start date
Sometimes you can't reach it. Usually is back up after a few hours. Maybe maintenance.
Jaminator
New Member
This is one good deal is about to go down!!!! Can not wait!!!!
Everything should be fixed by now sir!
Basically, any period has its half-life and steroids are no exception. Let me give you an example: you have been injecting yourself with testosterone cypionate once a week in 2 to 3 cc's for 10 weeks. How will you know if all of the drug has already left your system? Will it run out after the last injection? The answer to this will be given by calculating the half-life of the drugs, in our case testosterone cypionate. The half-life of testosterone is about 12 days (there are sources that say 15 days). Does this mean that 12 days after your last injection of cypionate is the time to start PKT? This is not always the case. You will still have the active ingredient in your bloodstream. Every 12 days, the amount of active ingredient will be halved.
So we can clearly see that when we finish the course with our last shot, it doesn't mean that the course is over. Even if you don't inject yourself with anything, it doesn't mean that you have become empty. You still have the active ingredients of the drugs you injected in your system. It is for this reason that you need to plan what to use, how long "on course" and "after" it. All of this is based on your half-life. In order to make a proper SCT.
Below is a list of the half-lives of the most commonly used steroids, their esters, and other excipients.
Half-life of oral medications:
Anadrol/Anapolan (oxymetholone) - 8 to 9 hours
Anavar (oxandrolone) - 9 hours
Dianabol (methandrostenolone, methandienone) - 4.5 to 6 hours
Vinstrol (stanazololone) - 9 hours
(Tableted or Deposited taken orally) - 9 hours
Half-life of Deposited Drugs:
Deca-durabolin (nandrolone decanoate) - 14 days
Equipoise - 14 days
Finaject (trenbolone acetate) - 3 days
Primobolan (methinolone enanthate) - 10.5 days
Sustanon or Omnadren - 15 to 18 days
Testosterone cypionate - 12 days
Testosterone enanthate - 10.5 days
Testosterone propionate - 4.5 days
Testosterone suspension - 1 day
Wynstrol (stanozolol) - 1 day
The half-life of the esters of the drugs:
Formate - 1.5 hours
Acetate - 3 days
Propionate - 2 days
Vinylpropionate - 4.5 days
Butyrate - 6 days
Valerate - 7.5 days
Hexanoate - 7.5 days
Coproate - 9 days
Isocoproate 9 days
Heptanoate - 10.5 days
Enanthate - 10.5 days
Octanoate - 12 days
Cypionate - 12 days
Nonanoate 13.5 days
Decanoate - 15 days
Undecanoate 16.5 days
Half-life of excipients:
Arimidex - 3 days
Clenbuterol - 1.5 days
Clomid - 5 days
Cytadren - 6 hours
T3 - 10 hours
We want to warn you right away that in some sources the number of days or hours may fluctuate. But -/+ it will be about the same. This is because there is a half-life and an elimination period
There is quite often confusion between these two terms. Many people assume that they are the same thing. However, no. The half-life does not tell you how long the substance will be in your body. A drug you take can have many half-lives before it leaves your body.
A half-life is the amount of time it takes for a substance to have exactly half its concentration.
For example: the half-life of anavar is about 9 hours +/-, so after 9 hours of oral administration of 50 mg of anavar, half will be in the system, i.e. 25 mg.
The lifespan is the period in which the amount of a substance in the body is sufficient for it to still have its proper effect on the body. Or on the contrary, to suppress the natural recovery of the natural physical function. It all depends on the dosage.
Many drugs have properties of similarity. At the expense of what? Let's look at testosterone. There is testosterone cypionate, enanthate, propionate, heptylate, phenylpropionate, decanoate, acetate, and many, many others. In all of these cases, the overriding hormone will be testosterone, which has been modified by the addition of an ester (enanthate, propionate, etc.). In this case, the following question arises. What is the difference between all of these testosterone esters in relation to bodybuilding?
An ester is a chain that consists mainly of carbon and hydrogen atoms. This chain is attached to the major hormones at the 17th carbon position (beta orientation), moreover, some compounds carry esters at the 3rd position as well (for the purposes of this article, it is not particularly important to understand the exact position of the ester). Esterification of injectable anabolic androgenic steroids basically has one function: to slow down the release of the steroid from the injection site. This is all due to the fact that the ester is markedly less soluble in aqueous medium, and in doing so, increases lipid (fat) solubility. This causes the action when the drug will gradually get into the muscle tissue, as it will be present in small quantities in the blood. Generally, the longer the chain, the less soluble the compound is in water, and the longer it will take to release to its peak injected dosage.
The delayed release of the substance, is a healthy plus in the medical field, because free testosterone (or other hormones) is active in the body for a fairly short amount of time (only a few hours). So it would require the unpleasant task of performing the right procedures if one always wanted to maintain hormone levels at a certain level. Imagine injecting testosterone every hour or two. But by adding ester to the hormone, an injection can be given once a week, or even less frequently, instead of having to constantly hole yourself with a needle. I think the benefits and need for esters have become clear.
Etherification temporarily disables the steroid molecules. Together with the chain blocking 17 beta position, it is impossible to attach to the androgen receptor (they may not have any activity in the body). In order for the compound to become active, the ester must be excreted. And this happens automatically when the compound enters the bloodstream, where enzymes quickly break down (hydrolyze) the ester chain. This allows the necessary hydroxyl group at the 17 beta position to be restored, allowing the drug to attach to the desired receptor. Only then can the steroid affect the skeletal muscles.
You can now understand why saying that cypionate is more powerful than enanthate makes no sense, since your muscles will use free testosterone, and which ester to take it from makes no difference.
There are many different esters used in conjunction with anabolic androgenic steroids, but again, they all have the same purpose. The esters differ only in their ability to lower the water solubility of the steroid. An ester like propionate can slow down the release of a steroid by a few days, while a decanoate ester slows down by +/- 15 days. Ether has no effect on the parent steroid in terms of conversion to estrogen or DHT, nor does it affect overall muscle building. So the differences in results and side effects that can be seen by bodybuilders that have used different esters with the same steroid is only a matter of time.
Testosterone enanthate causes estrogen related problems more readily than sustanon, all because the enanthate will peak sooner. The same applies to testosterone suspension, it will be worse in terms of gynecomastia and water recruitment, because it peaks very quickly (the situation is similar with propionate). In this case you should not expect peak testosterone in the blood in weeks, we just need a few days. Given the same level of testosterone in the blood, there will be no difference in terms of aromatization or DHT if we are talking about different esters. There is simply no mechanism that can contribute to this.
There is only one distinctive technical nuance between the esters, and that is the weight. The heavier the chain, the greater the total weight. For example, testosterone enanthate, 250mg of esterified steroid equals 180mg of free testosterone. 70mg of each 250mg injection is the weight of the ester. If we are quite meticulous, it will be clear that enanthant is slightly better than cipionate (this contradicts public opinion), because its chain has one less carbon atom (hence, the ester weight is lower). Clearly, the leader of this trio would be propionate.
In fact, esters are a very important and interesting point, but there is no magic here. Ether oils work in a perfectly understandable and explainable manner and do not alter the activity of the parent steroid in any way, other than the timing of its release!!! In fact, there are a lot of false stereotypes floating around about different testosterone esters, so feel free to ignore them. Testosterone is testosterone, period. If someone tells you that propiq is better than enka, and sust is a nuclear mix, this person obviously needs to upgrade his knowledge
So we can clearly see that when we finish the course with our last shot, it doesn't mean that the course is over. Even if you don't inject yourself with anything, it doesn't mean that you have become empty. You still have the active ingredients of the drugs you injected in your system. It is for this reason that you need to plan what to use, how long "on course" and "after" it. All of this is based on your half-life. In order to make a proper SCT.
Below is a list of the half-lives of the most commonly used steroids, their esters, and other excipients.
Half-life of oral medications:
Anadrol/Anapolan (oxymetholone) - 8 to 9 hours
Anavar (oxandrolone) - 9 hours
Dianabol (methandrostenolone, methandienone) - 4.5 to 6 hours
Vinstrol (stanazololone) - 9 hours
(Tableted or Deposited taken orally) - 9 hours
Half-life of Deposited Drugs:
Deca-durabolin (nandrolone decanoate) - 14 days
Equipoise - 14 days
Finaject (trenbolone acetate) - 3 days
Primobolan (methinolone enanthate) - 10.5 days
Sustanon or Omnadren - 15 to 18 days
Testosterone cypionate - 12 days
Testosterone enanthate - 10.5 days
Testosterone propionate - 4.5 days
Testosterone suspension - 1 day
Wynstrol (stanozolol) - 1 day
The half-life of the esters of the drugs:
Formate - 1.5 hours
Acetate - 3 days
Propionate - 2 days
Vinylpropionate - 4.5 days
Butyrate - 6 days
Valerate - 7.5 days
Hexanoate - 7.5 days
Coproate - 9 days
Isocoproate 9 days
Heptanoate - 10.5 days
Enanthate - 10.5 days
Octanoate - 12 days
Cypionate - 12 days
Nonanoate 13.5 days
Decanoate - 15 days
Undecanoate 16.5 days
Half-life of excipients:
Arimidex - 3 days
Clenbuterol - 1.5 days
Clomid - 5 days
Cytadren - 6 hours
T3 - 10 hours
We want to warn you right away that in some sources the number of days or hours may fluctuate. But -/+ it will be about the same. This is because there is a half-life and an elimination period
Lifespan and half-life of the drug
There is quite often confusion between these two terms. Many people assume that they are the same thing. However, no. The half-life does not tell you how long the substance will be in your body. A drug you take can have many half-lives before it leaves your body.
A half-life is the amount of time it takes for a substance to have exactly half its concentration.
For example: the half-life of anavar is about 9 hours +/-, so after 9 hours of oral administration of 50 mg of anavar, half will be in the system, i.e. 25 mg.
The lifespan is the period in which the amount of a substance in the body is sufficient for it to still have its proper effect on the body. Or on the contrary, to suppress the natural recovery of the natural physical function. It all depends on the dosage.
What are esters and what are they for?
Many drugs have properties of similarity. At the expense of what? Let's look at testosterone. There is testosterone cypionate, enanthate, propionate, heptylate, phenylpropionate, decanoate, acetate, and many, many others. In all of these cases, the overriding hormone will be testosterone, which has been modified by the addition of an ester (enanthate, propionate, etc.). In this case, the following question arises. What is the difference between all of these testosterone esters in relation to bodybuilding?
An ester is a chain that consists mainly of carbon and hydrogen atoms. This chain is attached to the major hormones at the 17th carbon position (beta orientation), moreover, some compounds carry esters at the 3rd position as well (for the purposes of this article, it is not particularly important to understand the exact position of the ester). Esterification of injectable anabolic androgenic steroids basically has one function: to slow down the release of the steroid from the injection site. This is all due to the fact that the ester is markedly less soluble in aqueous medium, and in doing so, increases lipid (fat) solubility. This causes the action when the drug will gradually get into the muscle tissue, as it will be present in small quantities in the blood. Generally, the longer the chain, the less soluble the compound is in water, and the longer it will take to release to its peak injected dosage.
The delayed release of the substance, is a healthy plus in the medical field, because free testosterone (or other hormones) is active in the body for a fairly short amount of time (only a few hours). So it would require the unpleasant task of performing the right procedures if one always wanted to maintain hormone levels at a certain level. Imagine injecting testosterone every hour or two. But by adding ester to the hormone, an injection can be given once a week, or even less frequently, instead of having to constantly hole yourself with a needle. I think the benefits and need for esters have become clear.
Etherification temporarily disables the steroid molecules. Together with the chain blocking 17 beta position, it is impossible to attach to the androgen receptor (they may not have any activity in the body). In order for the compound to become active, the ester must be excreted. And this happens automatically when the compound enters the bloodstream, where enzymes quickly break down (hydrolyze) the ester chain. This allows the necessary hydroxyl group at the 17 beta position to be restored, allowing the drug to attach to the desired receptor. Only then can the steroid affect the skeletal muscles.
You can now understand why saying that cypionate is more powerful than enanthate makes no sense, since your muscles will use free testosterone, and which ester to take it from makes no difference.
Action of different esters
There are many different esters used in conjunction with anabolic androgenic steroids, but again, they all have the same purpose. The esters differ only in their ability to lower the water solubility of the steroid. An ester like propionate can slow down the release of a steroid by a few days, while a decanoate ester slows down by +/- 15 days. Ether has no effect on the parent steroid in terms of conversion to estrogen or DHT, nor does it affect overall muscle building. So the differences in results and side effects that can be seen by bodybuilders that have used different esters with the same steroid is only a matter of time.
Testosterone enanthate causes estrogen related problems more readily than sustanon, all because the enanthate will peak sooner. The same applies to testosterone suspension, it will be worse in terms of gynecomastia and water recruitment, because it peaks very quickly (the situation is similar with propionate). In this case you should not expect peak testosterone in the blood in weeks, we just need a few days. Given the same level of testosterone in the blood, there will be no difference in terms of aromatization or DHT if we are talking about different esters. There is simply no mechanism that can contribute to this.
There is only one distinctive technical nuance between the esters, and that is the weight. The heavier the chain, the greater the total weight. For example, testosterone enanthate, 250mg of esterified steroid equals 180mg of free testosterone. 70mg of each 250mg injection is the weight of the ester. If we are quite meticulous, it will be clear that enanthant is slightly better than cipionate (this contradicts public opinion), because its chain has one less carbon atom (hence, the ester weight is lower). Clearly, the leader of this trio would be propionate.
Conclusion
In fact, esters are a very important and interesting point, but there is no magic here. Ether oils work in a perfectly understandable and explainable manner and do not alter the activity of the parent steroid in any way, other than the timing of its release!!! In fact, there are a lot of false stereotypes floating around about different testosterone esters, so feel free to ignore them. Testosterone is testosterone, period. If someone tells you that propiq is better than enka, and sust is a nuclear mix, this person obviously needs to upgrade his knowledge
Amazing read, thank you for such an info!
Thank you friend! Your attention to what we post is valuable!
Mito
New Member
Ordered 4 times in the last 1 year, got every package. Products are top notch. Shipping was stealth and fast aswell. 10/10 couldn’t be more satisfied foreal
Dont forget to add touchdown photos then to get extra bonus to your store credit!
Wholesale offers are still on! We are constantly looking for partners
Examples of prices that start from 1000 eur order.
Testosterone P - 12 eur and lower
Winstrol oral - 14 eur and lower
Primobolan - 28 eur and lower.
Request Pricelist:
Email: sales@rt-support.com
Wickr: hilmabc
Telegram: HilmaBiocareSupport
Examples of prices that start from 1000 eur order.
Testosterone P - 12 eur and lower
Winstrol oral - 14 eur and lower
Primobolan - 28 eur and lower.
Request Pricelist:
Email: sales@rt-support.com
Wickr: hilmabc
Telegram: HilmaBiocareSupport
Looks really nice!!!!!!
order # 4513. I already made the purchase some time ago but I forgot to give a review. Order made to Portugal, it took less than 1 week and the products are completely genuine (I validated them all on Hilma's page). I needed help in the chat and they were quick and helpful. I highly recommend it and I'm going to take advantage of black friday to fill up the stock again!
Attachments
Christmas and New Year shipments timetable
All orders will be accepted and dealt with during festive season. The physical shipment of any order will be made in accordance to the timetable below:
21/12 - All orders will be processed and dispatched
22/12 - All orders will be processed and dispatched
23/12 - All orders will be processed and dispatched
24/12 - All orders will be accepted and processed, but No shipments due to Holidays
25/12 - All orders will be accepted and processed, but No shipments due to Holidays
26/12 - All orders will be accepted and processed, but No shipments due to Holidays
27/12 - All orders will be accepted and processed, but No shipments due to Holidays
28/12 - All orders will be accepted and processed, but No shipments due to Holidays
29/12 - All orders will be accepted and processed, but No shipments due to Holidays
30/12 - All orders will be accepted and processed, but No shipments due to Holidays
31/12 - All orders will be accepted and processed, but No shipments due to Holidays
1/1 - All orders will be accepted and processed, but No shipments due to Holidays
2/1 - All orders will be accepted and processed, but No shipments due to Holidays
3/1 - All orders will be processed and dispatched
4/1 - All orders will be processed and dispatched
5/1 - All orders will be processed and dispatched
6/1 - All orders will be processed and dispatched
All orders will be accepted and dealt with during festive season. The physical shipment of any order will be made in accordance to the timetable below:
21/12 - All orders will be processed and dispatched 22/12 - All orders will be processed and dispatched 23/12 - All orders will be processed and dispatched24/12 - All orders will be accepted and processed, but No shipments due to Holidays
25/12 - All orders will be accepted and processed, but No shipments due to Holidays
26/12 - All orders will be accepted and processed, but No shipments due to Holidays
27/12 - All orders will be accepted and processed, but No shipments due to Holidays
28/12 - All orders will be accepted and processed, but No shipments due to Holidays
29/12 - All orders will be accepted and processed, but No shipments due to Holidays
30/12 - All orders will be accepted and processed, but No shipments due to Holidays
31/12 - All orders will be accepted and processed, but No shipments due to Holidays
1/1 - All orders will be accepted and processed, but No shipments due to Holidays
2/1 - All orders will be accepted and processed, but No shipments due to Holidays
3/1 - All orders will be processed and dispatched 4/1 - All orders will be processed and dispatched 5/1 - All orders will be processed and dispatched 6/1 - All orders will be processed and dispatched
Jaminator
New Member
What time black friday sale will be starting?
kosp
Member
Guys its BLACKFRIDAY!
Place your orders at really good prices, you have time until 27 november.
Keep in mind that referal bonuses and discounts for first order will be switched off during this time!
Place your orders at really good prices, you have time until 27 november.
Keep in mind that referal bonuses and discounts for first order will be switched off during this time!
Some products can be out of stock from HilmaBiocare line, however other sustanon from SomatropLab should be still available.
Absolutely
Similar threads
