peptides
Subscriber
Snorted?Oh not, injection .
MESO-Rx
Anabolic Steroids
Neogene Biosicence (rHGH and peptides)
- Thread starter peptides
- Start date
MyNameIsJeff
Member
Do all these come lyophilized in sealed sterile vials?
peptides
Subscriber
Not,those peptides API raw powder is packaged in the bag.
MyNameIsJeff
Member
Then you are advertising in the wrong place buddy.
peptides
Subscriber
So what I supposed to answer?
peptides
Subscriber
If you have problem of shipping vials go through custom, maybe you can consider buy peptides API raw powder to lyophilized in sealed sterile vials by yourself.
rHGH
Ipamorelin
GHRP-2
GHRP-6
TB-500
Melanotan-1
Melanotan-2
PT-141
CJC-1295
CJC-1295 DAC
N-Acetyl Selank
Selank
Semax
N-Acetyl Semax
Semaglutide
Tirzepatide
Retatrutide
Bpc-157
Bpc-157 arg
Acetyl tetrapeptide-5
Melanostatin DM
Tripeptide-29
Syn-AKE
HGH frag
Epithalon
Snap-8
Ghk-cu
Ptd-dam(need custom)
Hcg
Kisspeptin-10
Peg mgf
Follistatin
FST344
Thymalin
Hexarelin
Sermorelin
B7-33
Oxytocin
DSIP
5-Amino-1MQ
Mots-c
Thmosin alpha-1
rHGH
Ipamorelin
GHRP-2
GHRP-6
TB-500
Melanotan-1
Melanotan-2
PT-141
CJC-1295
CJC-1295 DAC
N-Acetyl Selank
Selank
Semax
N-Acetyl Semax
Semaglutide
Tirzepatide
Retatrutide
Bpc-157
Bpc-157 arg
Acetyl tetrapeptide-5
Melanostatin DM
Tripeptide-29
Syn-AKE
HGH frag
Epithalon
Snap-8
Ghk-cu
Ptd-dam(need custom)
Hcg
Kisspeptin-10
Peg mgf
Follistatin
FST344
Thymalin
Hexarelin
Sermorelin
B7-33
Oxytocin
DSIP
5-Amino-1MQ
Mots-c
Thmosin alpha-1
peptides
Subscriber
sofa
AuxilabCN
Subscriber
⑉･ᴗ･⑉
peptides
Subscriber
How to produce freezing dry gh vials ?
If you need to produce 15,000-20,000 vials per month,,suggest to fill the vials by manual(The sub-machine is the three functions of adding liquid, semi-plugging and capping,it costs about 15K-70K USD,filling 1200-3800vials per hour, at the starting,more machines means more maintenance jobs )
You will need some beakers, measuring cylinders, 4-5 pipette guns. Look it up on amazon or somewhere. The water used for dissolve the raw powder,you can buy the pure water from supermarket(specific conductance under 1.5 uS/cm), you should choose it carefully. When you amount is big enough, you can buy a pure water machine.
Regarding sanitary conditions, first of all, the room can not have Windows, and the floor is clean. Prepare a super clean table. The room of the freeze-dryer should be ventilated, because the oil pump has a smell.
The most important thing is washing bottles, an ultrasound machine, and an oven. The oven needs to reach 250 centigrade degrees for two hours. Basic endotoxin was absent
These require some basic knowledge of laboratory aseptic operation
Buy one set 1 square mater freeze-drying machine （1.5x1.5x2 meters in size ）, about 30,000 USD, and flow with a vacuum pump ,you can do the pre-cooling, freeze-drying, vacuum plug in one operation , it needs 24-36 hours, out of about 5,000 bottles.
The rest is gloves, alcohol ,caps pressing forceps(4-5 pcs) and all that stuff .
If you need to produce 15,000-20,000 vials per month,,suggest to fill the vials by manual(The sub-machine is the three functions of adding liquid, semi-plugging and capping,it costs about 15K-70K USD,filling 1200-3800vials per hour, at the starting,more machines means more maintenance jobs )
You will need some beakers, measuring cylinders, 4-5 pipette guns. Look it up on amazon or somewhere. The water used for dissolve the raw powder,you can buy the pure water from supermarket(specific conductance under 1.5 uS/cm), you should choose it carefully. When you amount is big enough, you can buy a pure water machine.
Regarding sanitary conditions, first of all, the room can not have Windows, and the floor is clean. Prepare a super clean table. The room of the freeze-dryer should be ventilated, because the oil pump has a smell.
The most important thing is washing bottles, an ultrasound machine, and an oven. The oven needs to reach 250 centigrade degrees for two hours. Basic endotoxin was absent
These require some basic knowledge of laboratory aseptic operation
Buy one set 1 square mater freeze-drying machine （1.5x1.5x2 meters in size ）, about 30,000 USD, and flow with a vacuum pump ,you can do the pre-cooling, freeze-drying, vacuum plug in one operation , it needs 24-36 hours, out of about 5,000 bottles.
The rest is gloves, alcohol ,caps pressing forceps(4-5 pcs) and all that stuff .
peptides
Subscriber
How to produce freezing dry hgh/peptides vials from APIs raw powder?
If you need to produce 15,000-20,000 vials per month,,suggest to fill the vials by manual(The sub-machine is the three functions of adding liquid, semi-plugging and capping,it costs about 15K-70K USD,filling 1200-3800vials per hour, at the starting,more machines means more maintenance jobs )
You will need some beakers, measuring cylinders, 4-5 pipette guns. Look it up on amazon or somewhere. The water used for dissolve the raw powder,you can buy the pure water from supermarket(specific conductance under 1.5 uS/cm), you should choose it carefully. When you amount is big enough, you can buy a pure water machine.
Regarding sanitary conditions, first of all, the room can not have Windows, and the floor is clean. Prepare a super clean table. The room of the freeze-dryer should be ventilated, because the oil pump has a smell.
The most important thing is washing bottles, an ultrasound machine, and an oven. The oven needs to reach 250 centigrade degrees for two hours. Basic endotoxin was absent
These require some basic knowledge of laboratory aseptic operation
Buy one set 1 square mater freeze-drying machine （1.5x1.5x2 meters in size ）, about 30,000 USD, and flow with a vacuum pump ,you can do the pre-cooling, freeze-drying, vacuum plug in one operation , it needs 24-36 hours, out of about 5,000 bottles.
The rest is gloves, alcohol ,caps pressing forceps(4-5 pcs) and all that stuff .
If you need to produce 15,000-20,000 vials per month,,suggest to fill the vials by manual(The sub-machine is the three functions of adding liquid, semi-plugging and capping,it costs about 15K-70K USD,filling 1200-3800vials per hour, at the starting,more machines means more maintenance jobs )
You will need some beakers, measuring cylinders, 4-5 pipette guns. Look it up on amazon or somewhere. The water used for dissolve the raw powder,you can buy the pure water from supermarket(specific conductance under 1.5 uS/cm), you should choose it carefully. When you amount is big enough, you can buy a pure water machine.
Regarding sanitary conditions, first of all, the room can not have Windows, and the floor is clean. Prepare a super clean table. The room of the freeze-dryer should be ventilated, because the oil pump has a smell.
The most important thing is washing bottles, an ultrasound machine, and an oven. The oven needs to reach 250 centigrade degrees for two hours. Basic endotoxin was absent
These require some basic knowledge of laboratory aseptic operation
Buy one set 1 square mater freeze-drying machine （1.5x1.5x2 meters in size ）, about 30,000 USD, and flow with a vacuum pump ,you can do the pre-cooling, freeze-drying, vacuum plug in one operation , it needs 24-36 hours, out of about 5,000 bottles.
The rest is gloves, alcohol ,caps pressing forceps(4-5 pcs) and all that stuff .
peptides
Subscriber
If you need to produce 15,000-20,000 vials per month,,suggest to fill the vials by manual(The sub-machine is the three functions of adding liquid, semi-plugging and capping,it costs about 15K-70K USD,filling 1200-3800vials per hour, at the starting,more machines means more maintenance jobs )
You will need some beakers, measuring cylinders, 4-5 pipette guns. Look it up on amazon or somewhere. The water used for dissolve the raw powder,you can buy the pure water from supermarket(specific conductance under 1.5 uS/cm), you should choose it carefully. When you amount is big enough, you can buy a pure water machine.
Regarding sanitary conditions, first of all, the room can not have Windows, and the floor is clean. Prepare a super clean table. The room of the freeze-dryer should be ventilated, because the oil pump has a smell.
The most important thing is washing bottles, an ultrasound machine, and an oven. The oven needs to reach 250 centigrade degrees for two hours. Basic endotoxin was absent
These require some basic knowledge of laboratory aseptic operation
Buy one set 1 square mater freeze-drying machine （1.5x1.5x2 meters in size ）, about 30,000 USD, and flow with a vacuum pump ,you can do the pre-cooling, freeze-drying, vacuum plug in one operation , it needs 24-36 hours, out of about 5,000 bottles.
The rest is gloves, alcohol ,caps pressing forceps(4-5 pcs) and all that stuff .
You will need some beakers, measuring cylinders, 4-5 pipette guns. Look it up on amazon or somewhere. The water used for dissolve the raw powder,you can buy the pure water from supermarket(specific conductance under 1.5 uS/cm), you should choose it carefully. When you amount is big enough, you can buy a pure water machine.
Regarding sanitary conditions, first of all, the room can not have Windows, and the floor is clean. Prepare a super clean table. The room of the freeze-dryer should be ventilated, because the oil pump has a smell.
The most important thing is washing bottles, an ultrasound machine, and an oven. The oven needs to reach 250 centigrade degrees for two hours. Basic endotoxin was absent
These require some basic knowledge of laboratory aseptic operation
Buy one set 1 square mater freeze-drying machine （1.5x1.5x2 meters in size ）, about 30,000 USD, and flow with a vacuum pump ,you can do the pre-cooling, freeze-drying, vacuum plug in one operation , it needs 24-36 hours, out of about 5,000 bottles.
The rest is gloves, alcohol ,caps pressing forceps(4-5 pcs) and all that stuff .
Sourpower
Member
Why the fuck would any of us do this?
dontletheoldmanin
New Member
Great it you didn't lay out a proper protocol for having samples analyzed and tested with a proven lab.
Just saying
peptides
Subscriber
GMP Production and Quality System
With a fermentation capacity of 2X100 L and batch sizes up to 400 g, our production facility houses all the necessary equipment and services for the fermentation, midstream processing, purification and formulation of recombinant therapeutic proteins. For containment purposes areas where genetically modified organisms are present, such as fermentation, midstream process, protein refolding, wash area and liquid waste room, are all Grade D negative pressure (-15 Pa and 30 Pa). The chromatography suite, formulation, dispensing and solution preparation rooms are all Grade C (+ 30 Pa) in order to protect the product. The final filtration step occurs under a Grade A Laminar Flow Unit. An experienced QA and QC team has put in place a robust quality system enabling the company to hold a cGMP-license for production of therapeutic proteins for human use.
With a fermentation capacity of 2X100 L and batch sizes up to 400 g, our production facility houses all the necessary equipment and services for the fermentation, midstream processing, purification and formulation of recombinant therapeutic proteins. For containment purposes areas where genetically modified organisms are present, such as fermentation, midstream process, protein refolding, wash area and liquid waste room, are all Grade D negative pressure (-15 Pa and 30 Pa). The chromatography suite, formulation, dispensing and solution preparation rooms are all Grade C (+ 30 Pa) in order to protect the product. The final filtration step occurs under a Grade A Laminar Flow Unit. An experienced QA and QC team has put in place a robust quality system enabling the company to hold a cGMP-license for production of therapeutic proteins for human use.
peptides
Subscriber
Human Growth Hormone (hGH/hST) - Human Somatropin
We have considerable expertise in the manufacture of human somatropin (hGH/hST) that allows the company to efficiently produce commercial quantities. The API product meets the European Pharmacopoeial specifications.
We have considerable expertise in the manufacture of human somatropin (hGH/hST) that allows the company to efficiently produce commercial quantities. The API product meets the European Pharmacopoeial specifications.
eery
Well-known Member
Why do you have an instagram with the name janoshik? it kinda looks like you are impersonating him doing that, makes you look a bit shady imo.
https://www.instagram.com/janoshik_/
Why did you create a new thread when you already have this one? Neogene Biosicence (rHGH and peptides)
https://www.instagram.com/janoshik_/
Why did you create a new thread when you already have this one? Neogene Biosicence (rHGH and peptides)
peptides
Subscriber
Few people do this, but there is someone still I think.
peptides
Subscriber
As you can find, that is just an easy description of the processing.
peptides
Subscriber
We supply hGH/peptides Active Pharmaceutical Ingredients (API) in a form that allows them to be filled and finished to produce the desired dosage form.
peptides
Subscriber
Because I want people to know we are focus on the APIs raw powders, focus servicing the lab owners.
Similar threads
