PurplePandaLabs Raw source

@PandaRep @purplepandalabs

hey so my pack says “at warehouse” and hasn’t updated for 2 weeks. But nothing is wrong and I just need to be patient? What is the current estimated arrival time for packs to America?

Also will you ever carry DHT again? Thanks!

Because the shipping is slow because of the virus.
Shipping is averaging 30days. Averaging.
Remember, this tracking isnt like Amazon. It's a general tracking until it gets handed over to the local shipper, and even still it's not 100% accurate.
There's packs that show they're still in shippers procession and the next day they're in customs. Or their out for delivery.

Tracking AAS has never ever been an exact process. We cannot use the same shipping agents as you would, say a t-shirt. So the time and tracking is different. Add a global pandemic and that just exacerbates the process.
 
Regarding my post the other day about bad pip from MK test e. I have done some research and it seems some people are saying that test e can degrade back into TNE and enanthic acid if the raw has been exposed to air for a long period of time. Anyone have any info or validity to this statement. Curious because I have test E raws and need to know if I need to brew the entire batch in one go instead of letting it sit
 
Regarding my post the other day about bad pip from MK test e. I have done some research and it seems some people are saying that test e can degrade back into TNE and enanthic acid if the raw has been exposed to air for a long period of time. Anyone have any info or validity to this statement. Curious because I have test E raws and need to know if I need to brew the entire batch in one go instead of letting it sit


The raws used to brew MK are the same used to brew PPL. Same process, same Raws. They're also the same raws that have been sold to thousands of labs, some rather large and home brewers. The complaints of pip are near non existent.

It's going to be something in your bodied make up that doesn't agree with the hormone or possibly the carrier oil, which should be GSO if I recall.

Not beating you up, but if you really are 24 I'd think you don't have much experience with AAS, and shouldn't honestly. The pip may very well be self induced through and injection procedure or plan old virgin muscle. I'd suggest switching hormones to test cyp and seeing how you react and stay away from high concentration brews.
 
The raws used to brew MK are the same used to brew PPL. Same process, same Raws. They're also the same raws that have been sold to thousands of labs, some rather large and home brewers. The complaints of pip are near non existent.

It's going to be something in your bodied make up that doesn't agree with the hormone or possibly the carrier oil, which should be GSO if I recall.

Not beating you up, but if you really are 24 I'd think you don't have much experience with AAS, and shouldn't honestly. The pip may very well be self induced through and injection procedure or plan old virgin muscle. I'd suggest switching hormones to test cyp and seeing how you react and stay away from high concentration brews.
Thanks for the reply. I have been on running enanthate for almost a year now. Been cruising since late Oct on supposed gso carrier enth. switching between left and right glute so virgin muscle would be out of the question I think. I have straight gso from medlab and will inject that to see if it’s the gso. The MK test enth is dosed at 250mg/mL and to my knowledge that is moderately dosed? Will inject straight gso tonight and see if that’s the culprit. Not knocking any PPL or MK products just trying to find a solution to the issue “I” am experiencing.
 
Thanks for the reply. I have been on running enanthate for almost a year now. Been cruising since late Oct on supposed gso carrier enth. switching between left and right glute so virgin muscle would be out of the question I think. I have straight gso from medlab and will inject that to see if it’s the gso. The MK test enth is dosed at 250mg/mL and to my knowledge that is moderately dosed? Will inject straight gso tonight and see if that’s the culprit. Not knocking any PPL or MK products just trying to find a solution to the issue “I” am experiencing.

Don't inject straight GSO without filtering it first, you have a sterile setup to filter the oils?
 
Thanks for the reply. I have been on running enanthate for almost a year now. Been cruising since late Oct on supposed gso carrier enth. switching between left and right glute so virgin muscle would be out of the question I think. I have straight gso from medlab and will inject that to see if it’s the gso. The MK test enth is dosed at 250mg/mL and to my knowledge that is moderately dosed? Will inject straight gso tonight and see if that’s the culprit. Not knocking any PPL or MK products just trying to find a solution to the issue “I” am experiencing.

250mg/ml is the common pharmaceutic product concentration.. see Testoviron..
It s not moderate but with GSO it shouldnt give pain issues due to crystallization.. every compound has its own solubility etc..
 
Not trying to be a smart ass, but would you like us to raise the price?
I don't think I've ever gotten a question onna price increase before. I'll point that out.
 
Don't inject straight GSO without filtering it first, you have a sterile setup to filter the oils?
Yeah I have .22 pvdf filters. I have all stuff to homebrew including 100g of raw test e powder that I was going make in 100mL batches. But might just do one 50mL batch as a test run then the rest in one go so then it’s in BA and I don’t have to worry about the raw theoretically “degrading” once opened.?
 
Yeah I have .22 pvdf filters. I have all stuff to homebrew including 100g of raw test e powder that I was going make in 100mL batches. But might just do one 50mL batch as a test run then the rest in one go so then it’s in BA and I don’t have to worry about the raw theoretically “degrading” once opened.?

If stored properly it lasts a long time.
 
Not trying to be a smart ass, but would you like us to raise the price?
I don't think I've ever gotten a question onna price increase before. I'll point that out.

Cmon man dont treat me as a fool..
If i see the finished product that costs less than the raw i think : - the finished one Dont have the content of hormone it states
 
Thanks for the reply. I have been on running enanthate for almost a year now. Been cruising since late Oct on supposed gso carrier enth. switching between left and right glute so virgin muscle would be out of the question I think. I have straight gso from medlab and will inject that to see if it’s the gso. The MK test enth is dosed at 250mg/mL and to my knowledge that is moderately dosed? Will inject straight gso tonight and see if that’s the culprit. Not knocking any PPL or MK products just trying to find a solution to the issue “I” am experiencing.
I’ve been pinning for years and I get pip in my quads regardless and they are far from virgin.
 
Cmon man dont treat me as a fool..
If i see the finished product that costs less than the raw i think : - the finished one Dont have the content of hormone it states
No, it means that you will have to provide your own vials, caps and stoppers as well as filters. And where have you seen any finished product that is less cost than the raws?
 
No, it means that you will have to provide your own vials, caps and stoppers as well as filters. And where have you seen any finished product that is less cost than the raws?

You dont even know what you re talking about. “No, it means that you will have to provide your own vials, caps and stoppers as well as filters“ you didnt even read the messages in this page. I asked to Pandarep why “1.5g“ of FINISHED Trestolone 15ml 100mg/ml cost 65$ , when 1g of RAW Trestolone costs 55$. Do you get it? 1.5g FINISHED Trest 65$ , when 1.5g RAW would cost 82.5$, since 1g is 55$. We were talking about this, scroll up some messages and you ll find some messages about, one from Elisthemann that explains what i have just told because you answered without reading and told me that a finished one would cost more than Raw because vials stopper etc.
Go to PPL international Raw, look at Trestolone price and then check Injectables, you ll find the 15ml Trest
 
You dont even know what you re talking about. “No, it means that you will have to provide your own vials, caps and stoppers as well as filters“ you didnt even read the messages in this page. I asked to Pandarep why “1.5g“ of FINISHED Trestolone 15ml 100mg/ml cost 65$ , when 1g of RAW Trestolone costs 55$. Do you get it? 1.5g FINISHED Trest 65$ , when 1.5g RAW would cost 82.5$, since 1g is 55$. We were talking about this, scroll up some messages and you ll find some messages about, one from Elisthemann that explains what i have just told because you answered without reading and told me that a finished one would cost more than Raw because vials stopper etc.
Go to PPL international Raw, look at Trestolone price and then check Injectables, you ll find the 15ml Trest
You’re right man, I’m tired as hell and thought you were talking about semi finished.
 
Cmon man dont treat me as a fool..
If i see the finished product that costs less than the raw i think : - the finished one Dont have the content of hormone it states

I'm not. Clearly we've made a pricing mistake and need to raise the price. You want honesty or would you rather I just billshitted you? You guys are way too used to being lied too.
 
Back
Top