Qingdao Sigma Chemical Co., Ltd (International, US, EU, Canada and Australia domestic

[rickbaker88]

I have the capsules, a capsule filling machine, and a bag of 10G of Cialis. Is there a recommended way of evenly distributing the powder between capsules? Even if I did spread it perfectly, each of the 50 capsules would have 20mg and even that is a lot for Cialis IMO.

I've heard of a term "filler" before when it came to capping. Do most people mix it will filler first before capping? Any advice is helpful, don't want to harm myself doing this wrong.

 

[rockyraccoon]

I have the capsules, a capsule filling machine, and a bag of 10G of Cialis. Is there a recommended way of evenly distributing the powder between capsules? Even if I did spread it perfectly, each of the 50 capsules would have 20mg and even that is a lot for Cialis IMO.

I've heard of a term "filler" before when it came to capping. Do most people mix it will filler first before capping? Any advice is helpful, don't want to harm myself doing this wrong.

How To Cap "101"

This is how I do it. No 2 people probably do it the same. First off, there is 1000mcg's in a mg. There are 1000mg in a gram. Can you guess how many grams in a kilo, lol. The powder that is the main compound of desire is called active ingredient. The powder used to fill up space is called...

thinksteroids.com

 

[Spaceman Spiff]

They have the same BAC water as Amazon and charge double the price.

View attachment 273173

View attachment 273174

that is not Hospira BAC water

 

[Spaceman Spiff]

or gathering info for a bust.... when its not what they think, they FTIR it and it tells them its steroids..... the fact opened packs are coming through(that folks note powder taken out or vial gone etc), I think we should expect a major bust or 2 in coming months prob before election if I had to guess...

just for FYI if u get a package that has been opened and inspected it means they know what it is ie they dont just let powders come in with no idea what it is. So since they know what it is, AND still let u have it, this means they are building a case... SOOO many drug dealers are this arrogant oh they opened my weed packs from cali but dont care.... 3 months later door kicked in when get ur next package...

but perhaps peptides the FTIR does not work for and why they are getting through? ie comes back as protein and mannitol. although would assume they have a biologics lab to test for such...

Maybe I can ask for the lab results and if they did any quantitative testing on my GLP drug they took.

 

[narta]

I have the capsules, a capsule filling machine, and a bag of 10G of Cialis. Is there a recommended way of evenly distributing the powder between capsules? Even if I did spread it perfectly, each of the 50 capsules would have 20mg and even that is a lot for Cialis IMO.

I've heard of a term "filler" before when it came to capping. Do most people mix it will filler first before capping? Any advice is helpful, don't want to harm myself doing this wrong.

Google geometric dilution

 

[buffaloindierock]

How To Cap "101"

This is how I do it. No 2 people probably do it the same. First off, there is 1000mcg's in a mg. There are 1000mg in a gram. Can you guess how many grams in a kilo, lol. The powder that is the main compound of desire is called active ingredient. The powder used to fill up space is called...

thinksteroids.com

Spot on with this post, but some caveats:

1. When you measure your filler weight, do it with like 10 or more capsules on the machine, and spread them out on the machine so you can kind of put the same pressure you would normally use in production. Then divide by the number of capsules. This will get a good average. Sometimes, filling only one capsule, you pack it tighter than you normally would.

2. Everytime you buy new powder, repeat this calibration step, even if it's the same brand.

3. Similarly, if you've been hanging onto the same bag of filler for a few months, even if you're storing it with desiccants (I assume everyone has desiccants for storing stuff anyway, right?), you'll need to recalibrate because the powders can pull an amount of moisture from the air and change weight per volume.

This is all assuming you have a cap filling machine where you load like 50-100 caps at a time, dump in the powder, spread it, and pack it. Other filling machines are probably similar, but I feel like the $10 machine I just described is most popular.

 

[Spaceman Spiff]

Spot on with this post, but some caveats:

1. When you measure your filler weight, do it with like 10 or more capsules on the machine, and spread them out on the machine so you can kind of put the same pressure you would normally use in production. Then divide by the number of capsules. This will get a good average. Sometimes, filling only one capsule, you pack it tighter than you normally would.

2. Everytime you buy new powder, repeat this calibration step, even if it's the same brand.

3. Similarly, if you've been hanging onto the same bag of filler for a few months, even if you're storing it with desiccants (I assume everyone has desiccants for storing stuff anyway, right?), you'll need to recalibrate because the powders can pull an amount of moisture from the air and change weight per volume.

This is all assuming you have a cap filling machine where you load like 50-100 caps at a time, dump in the powder, spread it, and pack it. Other filling machines are probably similar, but I feel like the $10 machine I just described is most popular.

You can use the same powder. If everything is the same. Brand, filler type, capsules. It will be fine.

Maybe best to use fillers that do not absorb moisture as well


Vitamin c is where it's at

 

[clearheaded]

I have the capsules, a capsule filling machine, and a bag of 10G of Cialis. Is there a recommended way of evenly distributing the powder between capsules? Even if I did spread it perfectly, each of the 50 capsules would have 20mg and even that is a lot for Cialis IMO.

I've heard of a term "filler" before when it came to capping. Do most people mix it will filler first before capping? Any advice is helpful, don't want to harm myself doing this wrong.

please learn metric system/math prior to such endeavour... 10,000 mg=10g / 50 caps = 200mg per not 20mg...

 

[Pinnacle Elements]

please learn metric system/math prior to such endeavour... 10,000 mg=10g / 50 caps = 200mg per not 20mg...

Lmao dudes gunna end up ingesting an unknown, insane amount of cialis.

@rickbaker88 drill this into your head before you even attempt geometric dilution.

 

[BalticSea]

Has nothing 2 do with QSC but, a 100ml BAC water vial can u buy in my country for under 2 euro in a official online drug store or not for more than 5 € for a 100 ml vial

 

[Bumpygooch]

Guys that had packs RTS, did your tracking update along the way? Mine hasn’t updated in 10 days. I’ve ordered several times, I’m not concerned. But, the last time I had a lack of updates like this from int’l, pack was seized.

 

[lonewolf54321]

Guys that had packs RTS, did your tracking update along the way? Mine hasn’t updated in 10 days. I’ve ordered several times, I’m not concerned. But, the last time I had a lack of updates like this from int’l, pack was seized.

Mine didn't change from on hold for like 14 days and then finally switched to rts
Wait until you see the horrible rating the next shipping service has. Tracy is testing new shipping lines again so good luck on getting the reshipped pack.

 

[Bumpygooch]

Mine didn't change from on hold for like 14 days and then finally switched to rts
Wait until you see the horrible rating the next shipping service has. Tracy is testing new shipping lines again so good luck on getting the reshipped pack.

Mine is still stuck on “acceptance” from the 14th

 

[rask1123]

Lmao dudes gunna end up ingesting an unknown, insane amount of cialis.

@rickbaker88 drill this into your head before you even attempt geometric dilution.

He gets the best boner in his life and the worst headache)

 

[rask1123]

Guys that had packs RTS, did your tracking update along the way? Mine hasn’t updated in 10 days. I’ve ordered several times, I’m not concerned. But, the last time I had a lack of updates like this from int’l, pack was seized.

It was Express shipping directly to you, right?

 

[rask1123]

@Qingdao Sigma Chemicals any ETA for bpc157 and HMG restock international?
And are you planning to make Frag 176-191 peptide?

 

[Bumpygooch]

It was Express shipping directly to you, right?

Black Friday deal, so, I’m assuming it was express, cannot confirm.

 

[AlexDavis43]

Just want to let people know about my results from qsc tb500 and bpc157 i used both because i had chronic tendon pain because of an nasty injury. I had no high hopes cause most people said this is only gonna work for fresh acute scenarios. Nonetheless i used it for 8 weeks and the chronic pain went away completely. To this day no pain and this was +- year ago.

Thank you. What was your dosing protocol?

 

[Oldblood]

Are you using demin water from Bunnings?

Or just get the injection water from the needle exchange.

 

[AlexDavis43]

It’s the rx bac made by hospira that’s why it’s a tad more pricy but it’s on sale so it’s only like $1 more than what u posted from Amazon and it has good ph so u don’t get the burn or reaction at injecting site! It’s def not the same as what’s on Amazon also you saw the sterile water not bac water!

Mea culpa.