MESO-Rx

Anabolic Steroids

Triple B Solutions

MadBret said:
I would love to see guys comment after they read the fucking thread so they don't post shit that has been addressed and make themselves look like they are fucking retarded for their lack of reading comprehension.

To each their own, I guess.

Guys that don't like Trip are not hard to find. However, most all of his detractors are not customers.

We have guys trying to legitimately get answers to important questions and then we have clowns that like to ride coattails and can't seem to shut the fuck up even though they can't make a fucking point.

It's like the embarrassing fucks that you run into on the left and the right political spectrum. Always the loudmouthed motherfuckers that don't have the time to inform themselves with facts before they say some shit that is dumber than a rock.

*For the record, Trip doesn't claim to brew in a 40 liter beaker. He claims to brew side by side in smaller beakers. Meso, rightly so, doesn't consider brewing side by side to be the same batch. I have been happy with trip's gear and service but I agree this should be addressed and taken care of. Batch numbers for each separate batch, even if it's brewed on the same day at the same time, is what makes the most sense.
Click to expand...

He claims to brew side by side in the amount of 4kilos? What size glassware is he using for this? 500ml, 1000ml, 2000ml? That is 32 500ml flasks. LMFAO!
And who the fuck brews in beakers? lol..Tell him to post this side by side picture up. This ought to be a good fucking laugh.

I am still trying to get a straight answer if he measures in mls or grams. Since you seem to be one of his fanbois, maybe he will answer you since you're up his ass, and he wants to keep you as a customer.

Guys that dont like other sources aren't too hard to find either. I was reading the naps gear porn thread that was posted a few days ago, and voila! Haters hating on naps, that aren't even customers. Go figure. That guy has been around since the mid 2000s, and still going strong.
 
TripleBSolutions said:
I sent a picture to another member that proved I have more than what you just described. You have no idea how things work with raws because your source only gets raws from a very small raw source. One that I think is pretty good and growing, but he is not the end all.

You have admitted that things are personal with my lab and it sure continues to seem that way BBBG.
Click to expand...

You must think members are stupid. Domestic raw suppliers dont have the volume that you say you are buying. You'd be lucky to get 1000g of TE at any given time. The main ones are constantly out of stock, and there is no Mast P, Mast En, Anavar anywhere. Again, if they have some its only a few hundred grams.
 
And if you're getting 4 kilos at a time like you say you are, you don't know if those four 1000g bags are from the same batch. No one does.. and the Chinese are sneaky and greedy. Anything to make you happy and the sale..they are business men and women, nothing else.
 
PhilliesFan3 said:
You must think members are stupid. Domestic raw suppliers dont have the volume that you say you are buying. You'd be lucky to get 1000g of TE at any given time. The main ones are constantly out of stock, and there is no Mast P, Mast En, Anavar anywhere. Again, if they have some its only a few hundred grams.
Click to expand...
Very wrong.
 
TripleBSolutions said:
I don’t have to prove anything to you. You accused me of lying which I did not do. You can either choose to believe that I have a pretty nice lab setup and a couple hundred dollars for a beaker was not a big investment compared to other items (dispensers, Autoclave, Positive Air, Vmixer, etc) or you can keep pushing this notion that it is absolutely wild for me to brew in large batches.

I explained this before but you would need much larger than 20L to brew 10kg of Test E.

I still remember when the dishonest rumor started. I refused to say exactly when I sent samples to Jano and what carrier I used. Some things are going to remain private for my safety based off of what I am comfortable with.
Click to expand...
You brewing in beakers, I find hilarious. Why not use flasks, like they were meant for doing stuff like this.

No one brews the amounts you say you are doing side/side. NO ONE. If you were brewing 10kg of raws at one time, it would be in a steel/mixing reagent tank. Even 4kg is hard to believe. YOU ARE NOT AT THAT LEVEL. I could go to any other forum, and no one has heard of you. NO ONE! Your bbb brand isnt at the level of Geneza,DragonPharma,Genotec, or even British Dragon from back in the day.
 
PhilliesFan3 said:
You brewing in beakers, I find hilarious. Why not use flasks, like they were meant for doing stuff like this.

No one brews the amounts you say you are doing side/side. NO ONE. If you were brewing 10kg of raws at one time, it would be in a steel/mixing reagent tank. Even 4kg is hard to believe. YOU ARE NOT AT THAT LEVEL. I could go to any other forum, and no one has heard of you. NO ONE! Your bbb brand isnt at the level of Geneza,DragonPharma,Genotec, or even British Dragon from back in the day.
Click to expand...
You might want to do more research before you try source busting.

Why in the world would I use a flask? Using a flask does not provide a single benefit for me over using a beaker. It would only make things harder for me and it would make it harder to use certain overhead mixers. I am not claiming to be as big as them. If I was I would probably be brewing the amount we are speaking about on a weekly or monthly basis.
 
PhilliesFan3 said:
You brewing in beakers, I find hilarious. Why not use flasks, like they were meant for doing stuff like this.

No one brews the amounts you say you are doing side/side. NO ONE. If you were brewing 10kg of raws at one time, it would be in a steel/mixing reagent tank. Even 4kg is hard to believe. YOU ARE NOT AT THAT LEVEL. I could go to any other forum, and no one has heard of you. NO ONE! Your bbb brand isnt at the level of Geneza,DragonPharma,Genotec, or even British Dragon from back in the day.
Click to expand...
Geneza? Lmfao. Bro have fun pinning motor oil you naps fanboy.
 
TripleBSolutions said:
Very wrong.
Click to expand...

What domestic raw supplier are you using? Ill email him/her right now and see what kind of volume he has. Ive contacted 3 main ones, and on one has it..

This is response to one I just asked yesterday..


Masteron Prop and Masteron Enan are out of stock
pls check the attachment.

Test C and Test E are in stock, but low quantity

tell us your order, we can offer you exact and best price,
 
TripleBSolutions said:
You might want to do more research before you try source busting.

Why in the world would I use a flask? Using a flask does not provide a single benefit for me over using a beaker. It would only make things harder for me and it would make it harder to use certain overhead mixers. I am not claiming to be as big as them. If I was I would probably be brewing the amount we are speaking about on a weekly or monthly basis.
Click to expand...

So you measure in mls when you brew I take it?
How would using a flask make things harder?
 
TripleBSolutions said:
I don’t have to prove anything to you. You accused me of lying which I did not do. You can either choose to believe that I have a pretty nice lab setup and a couple hundred dollars for a beaker was not a big investment compared to other items (dispensers, Autoclave, Positive Air, Vmixer, etc) or you can keep pushing this notion that it is absolutely wild for me to brew in large batches.

I explained this before but you would need much larger than 20L to brew 10kg of Test E.

I still remember when the dishonest rumor started. I refused to say exactly when I sent samples to Jano and what carrier I used. Some things are going to remain private for my safety based off of what I am comfortable with.
Click to expand...
What size glassware u have doesn't matter. You admitted to breaking up ur batches in smaller brews which is indeed another batch. So batches are not test. Raws are tested and some blind samples have been tested. Simple as that.
You seem to brew pretty well but any little mistake could happen and then you won't know which ones are fucked bc you didn't test that batch. Some people don't care but this would make you one of the best labs but you don't care to do it this way.
 
BigRed91 said:
What size glassware u have doesn't matter. You admitted to breaking up ur batches in smaller brews which is indeed another batch. So batches are not test. Raws are tested and some blind samples have been tested. Simple as that.
You seem to brew pretty well but any little mistake could happen and then you won't know which ones are fucked bc you didn't test that batch. Some people don't care but this would make you one of the best labs but you don't care to do it this way.
Click to expand...
Hey @BigRed91, I really appreciate what you just said. It may have been lost in the noise but I plan to brew in smaller batches or sub label seperate batches in the future. I felt that if members felt like they could not trust me with simple measurements and brewing by now they most likely should not be ordering from me. Clearly I was wrong about how members would feel.

I will be making these changes and I am about to start moving over to a new batch for some products.
 
You must log in or register to reply here.

Similar threads

M
My experience with Shanghai Sigma Audley (SSA)
2
Replies
22
Views
2K
forhealth87
F
Minty
Mint Anabolics - US Domestic Source
8 9 10
Replies
180
Views
11K
FastBun
F
M
Is it worth it to use QSC oils?
4 5 6
Replies
103
Views
3K
PaintDrinker
PaintDrinker
F
Seeking Raw Material Supplier - Assistance Needed
Replies
14
Views
854
iris
iris
Yura(HYB)
HYB (Best Service and Product - International Shipping)
41 42 43
Replies
842
Views
65K
Ruru_Teh_seks
Ruru_Teh_seks

Sponsors

Latest posts

Back
Top