MESO-Rx

Anabolic Steroids

Valiant labs

better than the other one..
missing information:
- shipping in general (domestic, reship policy,..)
- payment options
- labs for finished products (if available? if not, comment why)
...
 
valiant said:
Valiantlabsonline.com
10% disc promo code grandopen1
free 20ml vial of test e 300 while supplies last
buy 3 orals get 1 free


Hello everyone, After Making a Post without thinking and getting cooked for it and rightfully so. We thought it was a more casual form and was wrong. So we Apologize anyway - Valiant Labs here! We would like to express just how excited we are to be here on MESO. We are a small domestic lab offering a small lineup of high quality products. By keeping a smaller lineup of products, we are able to focus on sterility, concentration accuracy, and product presentation while gaining valuable experience and developing long-lasting customer relationships. Here’s a little bit of the standard operating procedures we have in place to ensure that our customers safety and health are top priority. Prior to brewing or encapsulating any batch of product, we take care to utilize lab gowns, nitrile/latex gloves, hair nets, and appropriate eye and respiratory PPE. We take care to stay well groomed prior to arriving to work - personal hygiene is a must for anyone who takes this line of work seriously. As an added layer of protection, each worker is sprayed with a cleaning solution prior to entering the work room. Our brewing stations are fitted with an industrial (Fumex FA-1 ) air filter designed to filter circulating air and capture loose or airborne dust particles that are all too common in lower quality products. Our work room is outfitted with a UV light which is operational at all times, whether brewing is being conducted or not.

During brewing, raw materials, carrier oils, and any necessary excipients are heated and mixed with a vortex mixer to ensure proper combination. To prevent hormone degradation, each compound is warmed only to the melting point necessary for a properly homogenized finished product. Following brewing, oils are dispensed through 0.2 micron PES filter and vacuum pumped into an awaiting sterilized flask. Once the oil has been filtered, it is then sent for a second pass through an additional filter of the same size. Following filtration, each batch is placed under black light to ensure no foreign contaminants are present and if satisfactory, the batch is warmed and dispensed into 10mL vials. Prior to their use, all seals are given bath in distilled water to dislodge any dust or fibers present from shipping. Once they have been cleaned, they are sterilized using isopropyl alcohol. The alcohol is allowed to dry prior to applying the seal to ensure that any bacteria is properly eliminated. After the seals and caps are applied, a final pass with the black light is performed to ensure that the quality meets our standards and the standards of our customers.

Oral raws are weighed using a 0.001 gram scale to ensure the accuracy of each batch. Once the number of capsules in the batch has been determined, calculations are made using basic principals of geometric dilution and trituration. Prior to mixing, both raws and filler material are passed through a mesh screen to break up any clumps that may be present from shipping and atmospheric changes in temperature or humidity. They are then put in a mortar and pestle for part by part mixing. Once the blend has reached final batch weight, it is put in through a V-mixer for 15 -20 minutes to finalize the distribution. Once this is completed, the finished powder is distributed into size 4 capsules, tamped to ensure proper fill, joined, locked, and finally placed into packaging for final distribution to our customers.

All lab equipment is washed with medical grade soap following each brewing session, rinsed with distilled water, given an alcohol bath, placed into a sealed bag before taking a trip through the autoclave for final sterilization where it is keep until the next use.


All our raws are tested by Batch through our supplier. We also will post some pictures of equipment to show some recommended transparency. We would like to thank every one for any input.
These are pictures of some small looks at our stock and some lab equitment. More on the actual lab coming soon. The actual lab and of more equitment. will post when taken. thak you.
Code: 
https://ibb.co/mtt043G
https://ibb.co/nmsZKPG
https://ibb.co/477RLzF
https://ibb.co/JFt90G1
https://ibb.co/pZtSGS3'
https://ibb.co/bJB570h
https://ibb.co/JC4M7dM
https://ibb.co/LdkdBgH
https://ibb.co/Lhh5kqR
https://ibb.co/zZ0xx0J
https://ibb.co/vQxntrX
https://ibb.co/44MKgDk
we are happy to answer any questions.

Thank you!
Click to expand...
Slow down. Take some time. You only get one chance to impress. This is your second and you still didn't get it right. If I was you I would spend about an hour looking at a few source threads here, and then spend a couple hours getting everything YOU think you need to make us happy with your intro. It's your job to sell yourself. We already have a few sources, what's going to separate you from them? What's going to make guys want Valiant over TripleB? LOL.

I expect we'll see more SST sources venture in here. The number of potential customers is significantly more. SST is saturated with competition too.

You want to impress us here. It takes more than just a fancy website and vials with shiny labels. Put a little bit of effort into it. It's YOUR little business not ours.
 
valiant said:
Valiantlabsonline.com
10% disc promo code grandopen1
free 20ml vial of test e 300 while supplies last
buy 3 orals get 1 free


Hello everyone, After Making a Post without thinking and getting cooked for it and rightfully so. We thought it was a more casual form and was wrong. So we Apologize anyway - Valiant Labs here! We would like to express just how excited we are to be here on MESO. We are a small domestic lab offering a small lineup of high quality products. By keeping a smaller lineup of products, we are able to focus on sterility, concentration accuracy, and product presentation while gaining valuable experience and developing long-lasting customer relationships. Here’s a little bit of the standard operating procedures we have in place to ensure that our customers safety and health are top priority. Prior to brewing or encapsulating any batch of product, we take care to utilize lab gowns, nitrile/latex gloves, hair nets, and appropriate eye and respiratory PPE. We take care to stay well groomed prior to arriving to work - personal hygiene is a must for anyone who takes this line of work seriously. As an added layer of protection, each worker is sprayed with a cleaning solution prior to entering the work room. Our brewing stations are fitted with an industrial (Fumex FA-1 ) air filter designed to filter circulating air and capture loose or airborne dust particles that are all too common in lower quality products. Our work room is outfitted with a UV light which is operational at all times, whether brewing is being conducted or not.

During brewing, raw materials, carrier oils, and any necessary excipients are heated and mixed with a vortex mixer to ensure proper combination. To prevent hormone degradation, each compound is warmed only to the melting point necessary for a properly homogenized finished product. Following brewing, oils are dispensed through 0.2 micron PES filter and vacuum pumped into an awaiting sterilized flask. Once the oil has been filtered, it is then sent for a second pass through an additional filter of the same size. Following filtration, each batch is placed under black light to ensure no foreign contaminants are present and if satisfactory, the batch is warmed and dispensed into 10mL vials. Prior to their use, all seals are given bath in distilled water to dislodge any dust or fibers present from shipping. Once they have been cleaned, they are sterilized using isopropyl alcohol. The alcohol is allowed to dry prior to applying the seal to ensure that any bacteria is properly eliminated. After the seals and caps are applied, a final pass with the black light is performed to ensure that the quality meets our standards and the standards of our customers.

Oral raws are weighed using a 0.001 gram scale to ensure the accuracy of each batch. Once the number of capsules in the batch has been determined, calculations are made using basic principals of geometric dilution and trituration. Prior to mixing, both raws and filler material are passed through a mesh screen to break up any clumps that may be present from shipping and atmospheric changes in temperature or humidity. They are then put in a mortar and pestle for part by part mixing. Once the blend has reached final batch weight, it is put in through a V-mixer for 15 -20 minutes to finalize the distribution. Once this is completed, the finished powder is distributed into size 4 capsules, tamped to ensure proper fill, joined, locked, and finally placed into packaging for final distribution to our customers.

All lab equipment is washed with medical grade soap following each brewing session, rinsed with distilled water, given an alcohol bath, placed into a sealed bag before taking a trip through the autoclave for final sterilization where it is keep until the next use.


All our raws are tested by Batch through our supplier. We also will post some pictures of equipment to show some recommended transparency. We would like to thank every one for any input.
These are pictures of some small looks at our stock and some lab equitment. More on the actual lab coming soon. The actual lab and of more equitment. will post when taken. thak you.
Code: 
https://ibb.co/mtt043G
https://ibb.co/nmsZKPG
https://ibb.co/477RLzF
https://ibb.co/JFt90G1
https://ibb.co/pZtSGS3'
https://ibb.co/bJB570h
https://ibb.co/JC4M7dM
https://ibb.co/LdkdBgH
https://ibb.co/Lhh5kqR
https://ibb.co/zZ0xx0J
https://ibb.co/vQxntrX
https://ibb.co/44MKgDk
we are happy to answer any questions.

Thank you!
Click to expand...
You go by the word of your supplier that your raws are ok???

That would be like us buying your vials going by your word that they're good. We don't do that though. Test your products. Pick Jano or Lab4Tox or ChemTox. Test your raws so you know the purity and you can adjust your recipes to account for that. Don't just blindly toss an extra 10% in. That's what hack homebrewers do and you're supposed to be a professional if you're selling to other people.

Then mix up a batch, your labels should have that batch number. And send samples of your finished products for analysis. We want to see that. Give a $300 credit for guys to test your products blind and randomly. It sounds like a lot, but it'll sell your product faster and you'll be surprised how few guys take advantage of it. We're all lazy so it'll take a $300 credit to motivate.

Then when those blind sample results come back, they get compared to the samples you submitted. If they match, then you build some trust and the product flies off your shelves. If it doesn't match then we burn the thread down.

And don't do what TripleB has done trying to bypass the samples. Fucker ordered a big stock of raws and he's resupplying from that stock. Those are separate batches. There's no way anyone believes he brewed and capped 1,000s of vials all at once. He thinks he figured out a way to bypass our requirements but he shot himself in the foot. He's too popular right now but guys will care enough eventually. If you do things right, you'll be wildly popular and successful here. But as soon as there's competition, it's best product wins. There is no loyalty.
 
Meterman05 said:
PES filter membrane huh? That tells me all I need to know about your ability to brew
Click to expand...
muscletrain said:
You can't edit your threads after 15 minutes on Meso, your shitty opener is forever immortalized for you to look at.

1) Do you have HPLC testing on all your raws/finished product?
2) Product photos?
3) lab/Sanitation photos to prove you're not a bath tub brewer?
Click to expand...
Why did my second post get deleted ? It had a way better opening lol
 
There is blood work done on our labs that were posted on sst I will share them. Also on our site is lab testing on all Raws that are used and sold.
 
valiant said:
Valiantlabsonline.com
10% disc promo code grandopen1
free 20ml vial of test e 300 while supplies last
buy 3 orals get 1 free


Hello everyone, After Making a Post without thinking and getting cooked for it and rightfully so. We thought it was a more casual form and was wrong. So we Apologize anyway - Valiant Labs here! We would like to express just how excited we are to be here on MESO. We are a small domestic lab offering a small lineup of high quality products. By keeping a smaller lineup of products, we are able to focus on sterility, concentration accuracy, and product presentation while gaining valuable experience and developing long-lasting customer relationships. Here’s a little bit of the standard operating procedures we have in place to ensure that our customers safety and health are top priority. Prior to brewing or encapsulating any batch of product, we take care to utilize lab gowns, nitrile/latex gloves, hair nets, and appropriate eye and respiratory PPE. We take care to stay well groomed prior to arriving to work - personal hygiene is a must for anyone who takes this line of work seriously. As an added layer of protection, each worker is sprayed with a cleaning solution prior to entering the work room. Our brewing stations are fitted with an industrial (Fumex FA-1 ) air filter designed to filter circulating air and capture loose or airborne dust particles that are all too common in lower quality products. Our work room is outfitted with a UV light which is operational at all times, whether brewing is being conducted or not.

During brewing, raw materials, carrier oils, and any necessary excipients are heated and mixed with a vortex mixer to ensure proper combination. To prevent hormone degradation, each compound is warmed only to the melting point necessary for a properly homogenized finished product. Following brewing, oils are dispensed through 0.2 micron PES filter and vacuum pumped into an awaiting sterilized flask. Once the oil has been filtered, it is then sent for a second pass through an additional filter of the same size. Following filtration, each batch is placed under black light to ensure no foreign contaminants are present and if satisfactory, the batch is warmed and dispensed into 10mL vials. Prior to their use, all seals are given bath in distilled water to dislodge any dust or fibers present from shipping. Once they have been cleaned, they are sterilized using isopropyl alcohol. The alcohol is allowed to dry prior to applying the seal to ensure that any bacteria is properly eliminated. After the seals and caps are applied, a final pass with the black light is performed to ensure that the quality meets our standards and the standards of our customers.

Oral raws are weighed using a 0.001 gram scale to ensure the accuracy of each batch. Once the number of capsules in the batch has been determined, calculations are made using basic principals of geometric dilution and trituration. Prior to mixing, both raws and filler material are passed through a mesh screen to break up any clumps that may be present from shipping and atmospheric changes in temperature or humidity. They are then put in a mortar and pestle for part by part mixing. Once the blend has reached final batch weight, it is put in through a V-mixer for 15 -20 minutes to finalize the distribution. Once this is completed, the finished powder is distributed into size 4 capsules, tamped to ensure proper fill, joined, locked, and finally placed into packaging for final distribution to our customers.

All lab equipment is washed with medical grade soap following each brewing session, rinsed with distilled water, given an alcohol bath, placed into a sealed bag before taking a trip through the autoclave for final sterilization where it is keep until the next use.


All our raws are tested by Batch through our supplier. We also will post some pictures of equipment to show some recommended transparency. We would like to thank every one for any input.
These are pictures of some small looks at our stock and some lab equitment. More on the actual lab coming soon. The actual lab and of more equitment. will post when taken. thak you.
Code: 
https://ibb.co/mtt043G
https://ibb.co/nmsZKPG
https://ibb.co/477RLzF
https://ibb.co/JFt90G1
https://ibb.co/pZtSGS3'
https://ibb.co/bJB570h
https://ibb.co/JC4M7dM
https://ibb.co/LdkdBgH
https://ibb.co/Lhh5kqR
https://ibb.co/zZ0xx0J
https://ibb.co/vQxntrX
https://ibb.co/44MKgDk
we are happy to answer any questions.

Thank you!
Click to expand...

Your HPLC tests are dated more than 2 years old??
 
First picture that came to mind after this introduction.
 

Attachments

  • Illicit-meth-lab-in-a-bedroom-Reprinted-with-permission-from-Methamphetamine-Awareness.png
    Illicit-meth-lab-in-a-bedroom-Reprinted-with-permission-from-Methamphetamine-Awareness.png
    298.2 KB · Views: 93
Explain your OPSEC. Guys are ordering from a clearnet source—visible to LE—and they may want to know how you’re handling emails with their personal information enclosed.
 
I was gonna tell you to fuck off back to sst, but it seems like you are trying...sorta kinda.
So, if you want an education, read the tripleb thread. It was suggested to you before, but you didnt do it and still made a second intro. Go read it. take notes. All you need to know is in it. You are getting solid suggestions already, but after the months long barbender experience, people are probably tired of the hand holding.
Good Luck
 
Also why does the raw section on your website say "domestic". you are clearly shipping them from overseas and don't give the lame excuse of shipping overseas to your domestic warehouse (AKA someone's garage) then ship them domestically after that. That's not domestic shipping that's international to a reshipper.
 
valiant said:
Yea Understood . how do I edit this? cant see a drop down or anything? I took it as a more open forum. but that was my mistake. I dont mind questions. How can i edit this thread so I can post a proper intro ?
Click to expand...
I hope create your products with more preparation and research than this intro

lol at the black light. What the fuck, are you jizzing in your media bottle?
 
Meterman05 said:
Also why does the raw section on your website say "domestic". you are clearly shipping them from overseas and don't give the lame excuse of shipping overseas to your domestic warehouse (AKA someone's garage) then ship them domestically after that. That's not domestic shipping that's international to a reshipper.
Click to expand...
raw hplc testing looks the same as ppl's
is this normal? same supplier?
 
You must log in or register to reply here.

Similar threads

FUYAO
FUYAO Peptides: Best quality and prices
2 3 4
Replies
62
Views
2K
accidentaljedi173
accidentaljedi173
utinon.shop
UTINON - Pharma EU
Replies
16
Views
380
Enjoythements
Enjoythements
DevonPharmacy
  • Sticky
MESO-Rx Sponsor Devon One Stop Shop - Steroids, Peptides, Pct and Pharmacy - US DOMESTIC, INT
11 12 13
Replies
251
Views
12K
Vanargandar
Vanargandar
S
SEANBIO
2
Replies
33
Views
3K
peptides
peptides
F
Seeking Raw Material Supplier - Assistance Needed
Replies
15
Views
556
iris
I

Sponsors

Latest posts

Back
Top