24k Pharma US Domestic Source

hmm interesting care to elaborate?
So, Hoyt, at least for a good while was very pleasant and took the time to answer every single question very thoroughly. Eventually he got frustrated and that was his downfall. 24K seems to have learned from that mistake.

Next, they use the same identical vials/tops, which whatever, not that big a deal, but definitely suspect as there are so many different types of vials/tops that can be used. But, the labeling is also very similar. I don't know.

All of this could be coincidental, I don't doubt that. But, the timing, tone of the posts, and the vial similarities help me to draw at least a skeptical glance at him...

Just saying, I haven't deep dove this at all, just my observations.
 
So, Hoyt, at least for a good while was very pleasant and took the time to answer every single question very thoroughly. Eventually he got frustrated and that was his downfall. 24K seems to have learned from that mistake.

Next, they use the same identical vials/tops, which whatever, not that big a deal, but definitely suspect as there are so many different types of vials/tops that can be used. But, the labeling is also very similar. I don't know.

All of this could be coincidental, I don't doubt that. But, the timing, tone of the posts, and the vial similarities help me to draw at least a skeptical glance at him...

Just saying, I haven't deep dove this at all, just my observations.

I am aware of Hoyt labs, however I am guarantee that I am not the same individual. The vials, rubber stoppers, and flip tops are all from GPZ Services. There may be other sellers but I get most of my supplies from GPZ services. The labeling is loosely based off a private lab from China that no longer exists anymore. The tone of post is my attempt to be as professional as possible. If there is any other proof that would would like, please ask. Thanks.
 
I am aware of Hoyt labs, however I am guarantee that I am not the same individual. The vials, rubber stoppers, and flip tops are all from GPZ Services. There may be other sellers but I get most of my supplies from GPZ services. The labeling is loosely based off a private lab from China that no longer exists anymore. The tone of post is my attempt to be as professional as possible. If there is any other proof that would would like, please ask. Thanks.
IDK. The timing and the process you took is just like his was. The timing was as soon as hoyt was getting kicked off of reddit for putting up somebodies personal information. then you came to reddit, had a few fanboys off the bat (read: shills), I assume made a few sales, then jumped over here, focused more on Meso for a while, etc etc... along with the other things I noticed, It's not a big leap. But, again, maybe I'm wrong, just trying to make everyone aware of what I noticed, that's all.
 
IDK. The timing and the process you took is just like his was. The timing was as soon as hoyt was getting kicked off of reddit for putting up somebodies personal information. then you came to reddit, had a few fanboys off the bat (read: shills), I assume made a few sales, then jumped over here, focused more on Meso for a while, etc etc... along with the other things I noticed, It's not a big leap. But, again, maybe I'm wrong, just trying to make everyone aware of what I noticed, that's all.

I understand your concern. I am unable to control the actions of other individuals and customers, I do not ask customers to post reviews nor do I ask them to do anything that they do not want to do themselves. One possible reason that I may seem more active here than on Reddit is because individuals post here and I am obliged to respond. I have not had a noteworthy update to post on Reddit for quite some time and accordingly I have not posted an update here either. I have been as transparent as possible and if there's any information you would like in regards to linking me with other labs or individuals, I can try to provide the best proof I can that it is not the case.
 
question, if you get crashed gear, heat it up, and some strands still remain as im sure a lot of you have witnessed when heating crashed gear, is that an obvious sign that some sort of hormone/substance is in the oil at least?
I got a couple crashed but of course was informed of it beforehand and luckily it was only test not tren and the test stayed uncrashed after a single heating.
 
Doing my second pin tonight, and I have a few questions. Theres not any bruising, but my ass is still sore. I'm assuming from bad injection technique, and virgin muscle. How long will this soreness typically last? Is it safe to pin in an area that is still sore? I'm pinning twice a week. Should I rotate to thighs, if pain still exists in glutes? Once test kicks in, and starts making your muscles heal faster, I'm assuming the pin sites will heal faster, right? Also, I ordered lure lock pins and syringes from GPZ. I've noticed a Good amount of oil stuck in the plastic part between stopper, and needle. Should I load up more to compensate? For instance, instead of .5, maybe .6 or .7? I've read about leaving a little air behind the oil, but that scares me. Anybody else doing the air bubble trick with success? Thanks again for any help. Oh, and I don't know the answer to the post right above mine, so I'm not ignoring, I just don't know.
 
Doing my second pin tonight, and I have a few questions. Theres not any bruising, but my ass is still sore. I'm assuming from bad injection technique, and virgin muscle. How long will this soreness typically last? Is it safe to pin in an area that is still sore? I'm pinning twice a week. Should I rotate to thighs, if pain still exists in glutes? Once test kicks in, and starts making your muscles heal faster, I'm assuming the pin sites will heal faster, right? Also, I ordered lure lock pins and syringes from GPZ. I've noticed a Good amount of oil stuck in the plastic part between stopper, and needle. Should I load up more to compensate? For instance, instead of .5, maybe .6 or .7? I've read about leaving a little air behind the oil, but that scares me. Anybody else doing the air bubble trick with success? Thanks again for any help. Oh, and I don't know the answer to the post right above mine, so I'm not ignoring, I just don't know.

If your butt is still sore you can switch from glutes to ventro glutes or the other way around. Poor injection techique should only leave you sore a couple days at the spot. You can use the air bubble trick without concern. Just don't pull 2ccs in there! A small bubble will do. You are not injecting IV, so if if a little air comes out of the needle you will be fine.
 
First, make sure you have a drop of oil at the needle tip. That's lube and helps completely. My pip starts at 20 hours after pinning and lasts 4 days. It's always minor, and is less painful by half each time, so by several weeks, it's nothing for me. Technique plays a huge roll in pip and is something YOU can work on.
Rotating sites is a must. You want to hit one a few times to desensitize it, but too much, and you'll scar it. 2 or 3 in one location, then move.
Bad gear plays a roll and there's nothing you can do, so half of it's on you. Get your part down, and the rest is up to the gear you're using. A small air bubble has shown to be no big deal, especially since you're supposed to aspirate to prove you're not in a vain. I don't worry about that tiny amount lost. It's pennies compared to dollars if you goof trying to save it.
Edit: aspirating actually causes a small air bubble. THAT bubble is enough to get your full dose, and since the bubble "came" from the muscle, you're simply returning it so that makes you sleep better.
 
question, if you get crashed gear, heat it up, and some strands still remain as im sure a lot of you have witnessed when heating crashed gear, is that an obvious sign that some sort of hormone/substance is in the oil at least?
I got a couple crashed but of course was informed of it beforehand and luckily it was only test not tren and the test stayed uncrashed after a single heating.

If it crashes Period, there is def something in the solution that would "crash" out of it, and if it crashes as crystals I think assuming the solute is hormone is a safe bet
 
Anybody else running 24k gear. I'm about 3 weeks in on 350 mg tren a per week and 250 mg test e per week. Definitely been dealing with some aggression issues, strength has gone up a bit, night sweats, and just sweating in general. Just wanted to see some other guys opinions. This is my first tren run fyi.
 
This is also my first tren run at 100mg eod. And I'm experiencing the same. Haven't done bloods yet but Have felt no drop off after running paddock test (pharm grade). I'd say my batch is gtg.
 
I've been on his test cyp for two weeks. Just did my forth pin tonight. I feel like I've been turned on. Keep in mind, I'm on a TRT dose of .5 to .6 ml twice a week. Started to get some volcano acne on the back, that hurt to the touch. I used bentonite clay, and that has calmed down. My balls are sore, and I've definitely got more motivation. I never had a problem getting a hardon, but they seem to be a little more proud than they have been in a while. That's all I got so far.. Prouder erections, backne, sore balls, and some get up and go.
 
Make sure you keep that estro in check nick

Yeah, I plan to get bloods in four or five weeks, and go from there. Some people don't get high estro on TRT when they split dose. I'm hoping I'm one of those people. I hate taking anything but vitamins. If worse comes to worse, do you have any suggestions for natural AI?
 

Sponsors

Latest posts

Back
Top