BrewPorn

[Heavy Iron]

Grainger will definitely have it. As for the fittings just be careful. Pipe fittings and hose fittings are not the same. If you bring the fitting from the pump and the inlet nozzle from the filter with you you should be able to size everything up to filter that glorious e cig oil.

This is the one they have locally. And yeah I'll bring the double female coupling (the one attached to the pump that the hose hooks up to.)

 

[Thegreek]

Perfect

 

[Heavy Iron]

Perfect

What size are the fittings and hose? Sorry for the 100 questions. I'm at Grainger. Lol

 

[Heavy Iron]

I'm starting a thread. Filtration Porn.

 

[NorthMich]

Ya. Show us your girlfriend’s glass

 

[Thegreek]

What size are the fittings and hose? Sorry for the 100 questions. I'm at Grainger. Lol

Sorry just saw this. My pump was 1/4 flare. I converted that to 3/8 pipe and barbs for the tube I used.

 

[Heavy Iron]

TPP @100mg 2/18

 

[Thegreek]

View attachment 99563
TPP @100mg 2/18

When are you gonna pin that. Let me know how it is.

 

[Heavy Iron]

When are you gonna pin that. Let me know how it is.

I'm gonna check em out tomorrow. I mean it was my first short ester brew. And I doubt it would crash or anything. I'm running test e right now but I might do a pin just to make sure everything is good. A little pip test.

 

[Thegreek]

I'm gonna check em out tomorrow. I mean it was my first short ester brew. And I doubt it would crash or anything. I'm running test e right now but I might do a pin just to make sure everything is good. A little pip test.

It shouldn’t. I was going to brew mine at 1/18 so just curious. I don’t think it will crash.

 

[Heavy Iron]

It shouldn’t. I was going to brew mine at 1/18 so just curious. I don’t think it will crash.

I've never even ran anything with short esters so I'm excited for the spring. Still got some Tren A and NPP to brew

 

[BigNattyDaddy]

How much is does a homebrew setup cost?

 

[Thegreek]

I've never even ran anything with short esters so I'm excited for the spring. Still got some Tren A and NPP to brew

They definitely hit a little harder but it’s nothing crazy. You get good results fairly quickly but pinning gets old real quick. Especially when it’s 4-7 days a week for weeks and weeks. Two runs ago I had a hard time managing tren a sides but it was my fault because I kept playing around with the dose. This time I started at 350 a week then bumped to 525 for the last 2-3 weeks. Worked out pretty good. Just a little sleeplessness. NPP is great. It’s like trens happy little brother.

 

[Heavy Iron]

How much is does a homebrew setup cost?

- vacuum pump ~ 75
- glass media bottle ~ 10
- hose~ 9
- glass stirring rods ~3
- air flow fittings ~25
- glass beakers (one 250ml) ~2
- hot plate (Walmart) ~10
- scale ~10
- whatman bottle top filter ~14

So about 150. Minus the filter you reuse all that stuff. Your cost will come from supplies down the road. Like BB, BA, gloves, syringes, carrier oil, etc. Then you can either use sealed sterile vials or get open serum vials, stoppers, caps, and a crimper (mine is from Amazon and was like 60 bucks. Does the job)

So my recent order from medlabsupply was 4 whatman filters, 2 250ml and 1 500ml Hybex media bottles, 100 open vials, 100 stoppers/caps and came out to 180. And I'm brewing 50 vials of TPP, 25 vials of Tren A, 25 vials of NPP (300 in raws). So my buddy and I went in on everything. So for 250 a piece we each get 25 vials of TPP, 12/13 vials of Tren, and 12/13 vials of NPP.

Can't beat that.

 

[Thegreek]

I'm gonna check em out tomorrow. I mean it was my first short ester brew. And I doubt it would crash or anything. I'm running test e right now but I might do a pin just to make sure everything is good. A little pip test.

You ever pin that TPP. How was it.

 

[picholas]

You ever pin that TPP. How was it.

TPP rarely gives anyone pip. I prefer it to prop. Better for EOD injections too. You get a little less test than prop per mg but it is negligible.

 

[Thegreek]

TPP rarely gives anyone pip. I prefer it to prop. Better for EOD injections too. You get a little less test than prop per mg but it is negligible.

I have some TPP that I’m going to brew up but never ran before. Just figured I get some insight. I pin prop eod so I doubt there is to much of a difference.

 

[picholas]

I have some TPP that I’m going to brew up but never ran before. Just figured I get some insight. I pin prop eod so I doubt there is to much of a difference.

Just messing with the steroid cycle plot you can prop levels maintain a higher peak when ED due to the half life, and TPP maintains a higher peak when EOD because it is slightly longer.

Honestly love it, I did this time and will do so in the future taper to TPP to end my cycle into PCT.

 

[Thegreek]

Just messing with the steroid cycle plot you can prop levels maintain a higher peak when ED due to the half life, and TPP maintains a higher peak when EOD because it is slightly longer.

Honestly love it, I did this time and will do so in the future taper to TPP to end my cycle into PCT.

My main reason for getting TPP is it’s the identical ester in NPP. So when injecting both in a cycle you peak and dip at the same time. Seems like a smart move to have both compounds hitting at the same time.

 

[picholas]

My main reason for getting TPP is it’s the identical ester in NPP. So when injecting both in a cycle you peak and dip at the same time. Seems like a smart move to have both compounds hitting at the same time.

Yep, I just brewed them together too. Only 18 more weeks until I can start pinning this shit and cycle again....from now on I'm sticking with 10-14 weeks cycles.