how to make transdermal testosterone?

[FlyGuy3232]

Is that with the DMSO? Also how often do you apply? I’m surprised that shit doesn’t burn your nuts bro lol

Once or twice a day. Works great. I had zero skin irritation. Its just a little stinky from the DMSO but good quality DMSO really isn't bad.

 

[Red_subbottom]

Better at doing what?

With testosrerone cream applied to the scrotum I reach T levels that would make injection users jealous and I reach more

I won't explain a scientific report which it seems that you are intelligent to go over by yourself. I posted the study because the subject was brought up in this thread.

I will offer some information to help educate you that DMSO does not get an API into the blood stream 100%. In the attached study it says 76% for young adults and 52% for older adults. This study does not show this high amount was absorbed into circulation. There may be some remaining in the stratum corneum.

I would like to understand why you hold DMSO in such a high light.

 

[Deleted member 59947]

I won't explain a scientific report which it seems that you are intelligent to go over by yourself. I posted the study because the subject was brought up in this thread.

I will offer some information to help educate you that DMSO does not get an API into the blood stream 100%. In the attached study it says 76% for young adults and 52% for older adults. This study does not show this high amount was absorbed into circulation. There may be some remaining in the stratum corneum.

I would like to understand why you hold DMSO in such a high light.

I'm glad you found a way that suits you with injections.
On my side I feel great everyday with transdermal creams knowing that I'm not deliberately injecting PUFA oils in my muscles.

My mood is upbeat and my sex drive insanely high thanks to the elevated DHT that application process brings about.

 

[camy9000]

I'm glad you found a way that suits you with injections.
On my side I feel great everyday with transdermal creams knowing that I'm not deliberately injecting PUFA oils in my muscles.

My mood is upbeat and my sex drive insanely high thanks to the elevated DHT that application process brings about.

i read that you had stopped taking tesosterone as made you feel bad what made you hop back on and do you feel better now ?

 

[Deleted member 59947]

i read that you had stopped taking tesosterone as made you feel bad what made you hop back on and do you feel better now ?

To tell everyone to go fuck themselves.

 

[camy9000]

To tell everyone to go fuck themselves.

ok but do you feel better? as well as telling others to go fuck themselves

 

[Deleted member 59947]

ok but do you feel better? as well as telling others to go fuck themselves

I feel great on test, what's your question?

 

[camy9000]

I feel great on test, what's your question?

sorry i ment you fell better than before ?
you said a whie ago that test left you feeling not so good so was wondering what had changed

 

[beefcake1252]

Do you need to filter transdermal test? Thinking of heavy metals in powder or solution

 

[beefcake1252]

here is a recipe below but dont go over 10mg/ml and i would say 10mg/ml is always good but if you wish to make 20mg/ml make a small 50 ml batch first . this article is a copy paste from basskiller




It is developed mainly for base steroid hormones (Testosterone Base, Boldenone Base, Nandrolone Base, etc.), but will work for many compounds to provide reasonably effective systemic delivery. The absorption rate is estimated to be around 40% with the 10% DMSO version listed below. The final product is a liquid, and while it's possible to add carbomers and thickeners to form a lotion or gel, it is considerably more involved and probably not worth the effort. Additionally, the liquid form is easier to compound - you can make it ahead of time, and just add your hormone powder and shake. Or you can dissolve the hormone earlier in the process, as described below.


Ingredients:

40% Isopropyl Alcohol (91% or better)
15% Isopropyl Myristate
15% Isopropyl Palmitate
10% Oleic Acid
10% Propylene Glycol
10% DMSO (99% Technical Grade or better recommended)


Don't feel like doing math? Whitey's got you covered.
For a 240ml (8 oz) batch:
40% Isopropyl Alcohol = 96ml
15% Isopropyl Myristate = 36ml
15% Isopropyl Palmitate = 36ml
10% Oleic Acid = 24ml
10% Propylene Glycol = 24ml
10% DMSO = 24ml


How Does It Work?:
40% Isopropyl Alcohol - Solvent for the compound, with moderate penetration capability
15% Isopropyl Myristate - Lubricates and softens the skin to enhance penetration
15% Isopropyl Palmitate - Same as IM, but oilier
10% Oleic Acid - Penetration enhancer works by disrupting the lipid layer of the skin
10% Propylene Glycol - Seals moisture in to aid in penetration
10% DMSO - The most powerful penetration enhancer available; drawbacks - garlic and sulfur smell/taste (less pronounced in higher purity DMSO), irritates and dries out the skin


Preparation (2 easy steps):

1. Dissolve your compound in the isopropyl alcohol. You can experiment (and it will vary from compound to compound), but don't expect to get more than 50mg of compound dissolved per ml.*
--DMSO is a good solvent also, so you may want to add it in first with the isopropanol to help dissolve the compound.

2. Add the other ingredients, mix, and you're done.
--Alternative (easy) method: just pour all ingredients into a beaker, mix, pour into bottle with your compound powder and shake intensely. If necessary, soak in hot water bath, and shake again.


Dosing and Administration:
The easiest way to apply is to use a spray bottle to apply, and then just rub it in vigorously. You can measure the output of your sprayer yourself to find out how many pumps/sprays equal a ml, and calculate your dosing from there. Thin patches of skin, like the tops of your feet work best. Keeping skin moisturized and rotating application sites can boost absorption by ~15%. Apply to clean, exfoliated skin, and don't forget to remove hair in the area you apply, or you will be wasting a tremendous amount of your carrier and compound.


Modifications:
--DMSO changes - I would go with 10% DMSO if you can handle it, maybe 5% less, if you have sensitive skin. 10% is better for absorption, 20% is even better, of course - but anything at 15% or higher will probably destroy your skin. You may be able to mitigate this by using aloe vera gel, but make it 100% pure, with no additives, because some of what you apply will get through the skin. Let your skin and yuck factor be your guide. To keep things simple, if you add/cut DMSO, you can just add back to/take from the isopropyl alcohol.

--If you don't want to buy isopropyl palmitate, you can just substitute isopropyl myristate. But it's in there for a reason, so leave it in if you can.

Do you need to filter the solution? If so what micron filter. Was thinking of heavy metals in powder

 

[rasengan]

Do you need to filter the solution? If so what micron filter. Was thinking of heavy metals in powder

Nah no need to filter it as janoshik also mentioned in a thread that heavy metals are just myth now .

 

[beefcake1252]

be nice guys, we're all just pixels on a screen, none of us know each other.

This is a widely used formula for transdermal delivery. Its highly efficient. The good thing is the DMSO and IPA mean there's very little that won't dissolve into the DMSO/IPA (mix your raw in these first). I don't even need to use heat.

40% Isopropyl Alcohol (not 'rubbing' alcohol, pure IsoPropylAlcohol)
15% Isopropyl Myristate
15% Isopropyl Palmitate
10% Oleic Acid
10% Propylene Glycol
10% DMSO

I can't source Palminate, so I double up the Myristate. After a while, I upped the DMSO to 20%. Garlic taste in the mouth within 10 seconds, boy does this stuff absorb fast !

My GF uses the above formula to make estrogenic HRT too, it works a treat.

Pins have their place, but its nice to go topical and take a break from pinning to let pin scars heal - and DMSO softens and heals muscle scarring faster than anything. try it for 4 weeks and rub some on your pin sites, unbelievable !

careful to wash your hands first, and also the target skin site before use - DMSO takes in every trace chemical that's on the skin with it.

Just read the recipe. Was thinking of making this myself. Only concern is dmso exorbes every other chemical. That iso propylene alcohol is say 96% proof. Would that become toxic in blood stream

 

[Dthcore]

Just read the recipe. Was thinking of making this myself. Only concern is dmso exorbes every other chemical. That iso propylene alcohol is say 96% proof. Would that become toxic in blood stream

Exorbes?

 

[Deleted member 59947]

Just read the recipe. Was thinking of making this myself. Only concern is dmso exorbes every other chemical. That iso propylene alcohol is say 96% proof. Would that become toxic in blood stream

That's why you just use DMSO and raw powders, nothing else.

 

[sinewave3]

Just read the recipe. Was thinking of making this myself. Only concern is dmso exorbes every other chemical. That iso propylene alcohol is say 96% proof. Would that become toxic in blood stream

I don’t think a few ml a day has killed anyone yet...

 

[Deleted member 59947]

I don’t think a few ml a day has killed anyone yet...

You don't know that.
It may well have over the course of just a few months, we haven't read autopsies.
We shouldn't be so casual with toxic chemicals shuttled directly into the blood.

 

[beefcake1252]

I'll probably just try your method just dmso. I want to make 50mg (5g) in 100ml. What percentage dmso shall I use. I read 20% causes skin problems

 

[hightest]

I'll probably just try your method just dmso. I want to make 50mg (5g) in 100ml. What percentage dmso shall I use. I read 20% causes skin problems

As close to 100% as possible

 

[Deleted member 59947]

I'll probably just try your method just dmso. I want to make 50mg (5g) in 100ml. What percentage dmso shall I use. I read 20% causes skin problems

Several things:

- use 99.99% pure DMSO, not diluted. It doesn't irritate the skin nor makes your breath smell if you use a high purity product.

- solubility depends on the AAS.
Testosterone no ester has a high solubility, I usually make 10% solutions (3 grams in 30ml).
AAS with esters attached are not soluble in DMSO unless you add ethanol.

 

[Dthcore]

Several things:

- use 99.99% pure DMSO, not diluted. It doesn't irritate the skin nor makes your breath smell if you use a high purity product.

- solubility depends on the AAS.
Testosterone no ester has a high solubility, I usually make 10% solutions (3 grams in 30ml).
AAS with esters attached are not soluble in DMSO unless you add ethanol.

Did you ever get the test prop to work?