PurplePandaLabs Raw source

[T-Bagger]

Yes I personally am the only one who physically does the brewing. I have help crimping the vials.


Welp that’s changed. When I closed my international shop for a while it was because my brewer moved back to his hometown. When I reopened it I resumed brewing for Panda. So yep, hands are dirty again. And now everything I brew is sent for analysis after it’s brewed. So there will never be an issue with dosage at this point. I’m continuing learning from past mistakes and constantly trying to improve. Anytime a mistake or problem does happen, I always rectify the problem

Interesting. Given the pics in your intro, I presumed a lot of your gear making was almost all automated and super large scale. Not trying to give you crap at all or a hard time, I just find it interesting. Then again, I don’t know how big your finished lines actually are and how much business you have from that.

 

[movingiron88]

Interesting. Given the pics in your intro, I presumed a lot of your gear making was almost all automated and super large scale. Not trying to give you crap at all or a hard time, I just find it interesting. Then again, I don’t know how big your finished lines actually are and how much business you have from that.

This guy is 1 giant walking talking lie. Every fuckup he tries and talk his way out of. He didnt brew his own before, now he does. Blah, blah, blah he is a bold face liar and thinks he can talk his way out of every problem. The problem being people want to believe his lies. More fuckups will continue followed by more lies and attitude.

 

[purplepandalabs]

Interesting. Given the pics in your intro, I presumed a lot of your gear making was almost all automated and super large scale. Not trying to give you crap at all or a hard time, I just find it interesting. Then again, I don’t know how big your finished lines actually are and how much business you have from that.

Currently I’m selling around 5,000 vials a month internationally. It’s not enough in my mind to justify spending the 50k+ on an automated assembly line, finding a large warehouse(somewhere I can pay off local police because making finished products is still illegal here). I think if I get to the point where I’m selling 10k vials a month I would invest in it. But since I’ve reopened my international shop orders have been steadily increasing. So maybe in the future I will buy a fully automated vial washer/vial sterilizer/filling/crimping/labeling assembly line worth of machines. But even if I have those machines, it all still has to get brewed by hand.

This guy is 1 giant walking talking lie. Every fuckup he tries and talk his way out of. He didnt brew his own before, now he does. Blah, blah, blah he is a bold face liar and thinks he can talk his way out of every problem. The problem being people want to believe his lies. More fuckups will continue followed by more lies and attitude.

At the end of the day I don’t hold a gun to anyone’s head and force them to buy from me. They do so because they like what they receive from me. I have thousands of satisfied customers around the world(tens of thousands if you count the sources who I sell raws to customers). Yes we have made mistakes. However, I have always and will always rectify any mistakes. I will continue to learn and move forward taking the knowledge of the past with me.

 

[burkeen]

Currently I’m selling around 5,000 vials a month internationally. It’s not enough in my mind to justify spending the 50k+ on an automated assembly line, finding a large warehouse(somewhere I can pay off local police because making finished products is still illegal here). I think if I get to the point where I’m selling 10k vials a month I would invest in it. But since I’ve reopened my international shop orders have been steadily increasing. So maybe in the future I will buy a fully automated vial washer/vial sterilizer/filling/crimping/labeling assembly line worth of machines. But even if I have those machines, it all still has to get brewed by hand.


At the end of the day I don’t hold a gun to anyone’s head and force them to buy from me. They do so because they like what they receive from me. I have thousands of satisfied customers around the world(tens of thousands if you count the sources who I sell raws to customers). Yes we have made mistakes. However, I have always and will always rectify any mistakes. I will continue to learn and move forward taking the knowledge of the past with me.

Funny you say " Yes we have made mistakes. However, I have always and will always rectify any mistakes" becouse i had some test p from you ( 100g) brewed at 110 mg ml.
I write to you like 3 weeks ago becouse i had blood drawn at 11nmol ( my normal test e values ) after 6 weeks of use at 150 mg test p EOD
And you never even bother to respond and correct your misstake.

And yes i have bloods in hand

 

[purplepandalabs]

Funny you say " Yes we have made mistakes. However, I have always and will always rectify any mistakes" becouse i had some test p from you ( 100g) brewed at 110 mg ml.
I write to you like 3 weeks ago becouse i had blood drawn at 11nmol ( my normal test e values ) after 6 weeks of use at 150 mg test p EOD
And you never even bother to respond and correct your misstake.

And yes i have bloods in hand

Last email I received from you was on October 23rd. Also didn’t receive any wickr messages from you. I always respond to either. However, I don’t offer replacements or a refund for products you brewed yourself. Due to the large variety of factors that could have taken place, or not taken place while you brewed. I only offer that if the raws themselves test to be less then 97% pure. Because it’s literally impossible that your testosterone levels were at that of your natural bodies output, if you were injecting 150mg of my test p raws into your body daily.

 

[burkeen]

Last email I received from you was on October 23rd. Also didn’t receive any wickr messages from you. I don’t not respond to either. However, I don’t offer replacements or a refund for products you brewed yourself. Due to the large variety of factors that could have taken place, or not taken place while you brewed. I only offer that if the raws themselves test to be less then 97% pure. Because it’s literally impossible that your testosterone levels were at that of your natural bodies output, if you were injecting 150mg of my test p raws into your body daily.

Most recent labs from your raws.;

https://superiorlab.net/wp-content/uploads/2018/11/tre-2-694x1024.png

https://superiorlab.net/wp-content/uploads/2018/11/tre-1-694x1024.png

 

[purplepandalabs]

So please tell me how i could fuck up my test p that hard when i have done over 20 lab tests from your raws that i cooked and Always showed 5-10% over the label, if you ever answer on wickr i can just show you the blood.

First, I’d like to circle back to the main point you were making, about me not fixing issues. I never received an email from you about your problem. Nor a wickr message. Second, I’m not sure how you messed it up. I wasn’t standing next to you when you brewed it. Third, why didn’t you make it 21 lab tests, yet instead you did a blood test? Because, in the past, if I recall correctly, I have always given you credit for testing you’ve done. I haven’t had any other sources report a mass number of bad bloods from their products they brewed with my raws. Also, as I’ve said before, I typically buy my testosterone raws monthly. Every batch of raws I buy I lab test and also brew products from. None of either the raws test reports or my finished products test reports have been off

 

[burkeen]

First, I’d like to circle back to the main point you were making, about me not fixing issues. I never received an email from you about your problem. Nor a wickr message. Second, I’m not sure how you messed it up. I wasn’t standing next to you when you brewed it. Third, why didn’t you make it 21 lab tests, yet instead you did a blood test? Because, in the past, if I recall correctly, I have always given you credit for testing you’ve done. I haven’t had any other sources report a mass number of bad bloods from their products they brewed with my raws. Also, as I’ve said before, I typically buy my testosterone raws monthly. Every batch of raws I buy I lab test and also brew products from. None of either the raws test reports or my finished products test reports have been off

Wrote to You on meso.
But sorry i am retarded i just rememberd i did stop injection around 7 Days before blood not to have it show so much.
Just dud the math and it could Most likely be around 11 nmol after that .

Once again slrry about this.

I dont do blood tests to cheak for testosterone but for my low t3 , iron And vitamin D but they Always cheak for t also.

 

[T-Bagger]

Currently I’m selling around 5,000 vials a month internationally. It’s not enough in my mind to justify spending the 50k+ on an automated assembly line, finding a large warehouse(somewhere I can pay off local police because making finished products is still illegal here). I think if I get to the point where I’m selling 10k vials a month I would invest in it. But since I’ve reopened my international shop orders have been steadily increasing. So maybe in the future I will buy a fully automated vial washer/vial sterilizer/filling/crimping/labeling assembly line worth of machines. But even if I have those machines, it all still has to get brewed by hand.

You sell 5k vials a month. One liter makes 100 vials, 10 liters makes 1000 vials. So you are brewing 50 liters by yourself per month? As well as brewing roughly 1.6 L per day, filtering, capping and filling vials? Or is someone else assisting in the capping, filtering and filling vials?

I get it that 2 L per day isn’t a ton for one guy to do, but every day, all day, all month?

 

[TheGoatimateWarrior]

My first order of business as the new rep is to throw out a special promo reward offer exclusive to the meso ONLY. So if you have a BOP account don’t even participate!!!!!!!

Now in this contest we’re going to pay tribute to the 2nd places GOAT @purplepandalabs himself with a FAN ART COMPETITION. You can use any form of software you like, draw from a piece of paper scan to a computer etc. Draw the image of @purplepandalabs as you imagine him!

Post your image in this thread to enter!

Winner will recieve a 125 mg TOTAL bottle of test cyp next year Christmas time! And a life time supply of monkey shaped vials. Who’s better?

 

[ickyrica]

My first order of business as the new rep is to throw out a special promo reward offer exclusive to the meso ONLY. So if you have a BOP account don’t even participate!!!!!!!

Now in this contest we’re going to pay tribute to the 2nd places GOAT @purplepandalabs himself with a FAN ART COMPETITION. You can use any form of software you like, draw from a piece of paper scan to a computer etc. Draw the image of @purplepandalabs as you imagine him!

Winner will recieve a 125 mg TOTAL bottle of test cyp next year Christmas time! And a life time supply of monkey shaped vials. Who’s better?

Hi @Sak

Got banned so now this is how you handle yourself? Fucking total joke dude.

 

[TheGoatimateWarrior]

My first order of business as the new rep is to throw out a special promo reward offer exclusive to the meso ONLY. So if you have a BOP account don’t even participate!!!!!!!

Now in this contest we’re going to pay tribute to the 2nd places GOAT @purplepandalabs himself with a FAN ART COMPETITION. You can use any form of software you like, draw from a piece of paper scan to a computer etc. Draw the image of @purplepandalabs as you imagine him!

Post your image in this thread to enter!

Winner will recieve a 125 mg TOTAL bottle of test cyp next year Christmas time! And a life time supply of monkey shaped vials. Who’s better?

 

[Heavy Iron]

My first order of business as the new rep is to throw out a special promo reward offer exclusive to the meso ONLY. So if you have a BOP account don’t even participate!!!!!!!

Now in this contest we’re going to pay tribute to the 2nd places GOAT @purplepandalabs himself with a FAN ART COMPETITION. You can use any form of software you like, draw from a piece of paper scan to a computer etc. Draw the image of @purplepandalabs as you imagine him!

Post your image in this thread to enter!

Winner will recieve a 125 mg TOTAL bottle of test cyp next year Christmas time! And a life time supply of monkey shaped vials. Who’s better?

(5) Engaging in deceptive activities, including misrepresentation of affiliation, impersonation, and fraud is prohibited.

 

[TheGoatimateWarrior]

(5) Engaging in deceptive activities, including misrepresentation of affiliation, impersonation, and fraud is prohibited.

Good thing I’m the actual Rep and not some fake loser like everyone complaining about pandas gear in this thread!

 

[rpbb]

(5) Engaging in deceptive activities, including misrepresentation of affiliation, impersonation, and fraud is prohibited.

Considering panda did that and didn't get banned. ......

 

[purplepandalabs]

Good thing I’m the actual Rep and not some fake loser like everyone complaining about pandas gear in this thread!

THIS DUMB PIECE OF SHIT IS NOT MY REP. His name is Sak

Considering panda did that and didn't get banned. ......

(5) Engaging in deceptive activities, including misrepresentation of affiliation, impersonation, and fraud is prohibited
1.) never misrepresented being affiliated to a source i.e. acted as if I worked for a company I didn’t(like this dipshit goatimate)
2.) never impersonated anyone
3.) never committed fraud i.e. scamming someone using false information

 

[T-Bagger]

Good thing I’m the actual Rep and not some fake loser like everyone complaining about pandas gear in this thread!

Ask what happened to the last rep - he got banned also, nice try. Take your candy ass on out of here. @Millard Baker, another ban please? Even @purplepandalabs has confirmed it’s not his rep.

 

[T-Bagger]

Yes I use a peristaltic pump and inline filters. It can do about a liter in 8 minutes. My tablet press is a zp9 press. It’s a 9 head rotary press. It’s supposed to be rated for 16,500 tabs per hour. But even with the additional force feeder, it can’t actually produce that many without the tablets becoming brittle. 10,000 an hour is the sweet spot. It’s mostly preparing the tablet binder that’s the brunt of time. Takes 35 minutes to prepare one batch of binder(10kg), then for each compound I make it takes a 30 minute mixing time. Followed by pressing pure active ingredient tablets, pure binder tablets(for calculating ratios). It’s just a big time consuming pain in the ass. But people prefer tablets over capsules so I do them.

Hell, I would’ve thought caps were a bigger pain in the ass over tabs. Doesn’t your machine have a tumbler to make it easier? Obviously I don’t know thenins and outs of these machines.

 

[Thegreek]

I don’t give a shit if you’re sak 2dumb kit looneytuned or a complete stranger. Please stop. You are seriously pathetic. The time you spend doing this shit is insane. For what. No one cares about what you say.

 

[ickyrica]

Ask what happened to the last rep - he got banned also, nice try. Take your candy ass on out of here. @Millard Baker, another ban please? Even @purplepandalabs has confirmed it’s not his rep.

What's the use of the ban? All this assclown is going to do is use more of his parents wifi to create another handle. Truly pathetic imo.

At the very least don't hid behind false handles like a bitch. Be a damn man.

I blocked him too. Not worth the time.