Qingdao Sigma Chemical Co., Ltd (International, US, EU, Canada and Australia domestic

[Garganzola]

Heat the 200 and mix it with your test… no pip. Shooting 800mg/week right now

Might just mix 200 and 100 and go with 150. It wont go to waste i ll use it during TRT+. I did try heating mix up, still kinda pipy

 

[Garganzola]

Doe anybody have an expirience with pharma seglutimide aka Ozempic. If so how does it compare with QSC one. Trying figure out weekly dosages.

 

[gettinginshape]

we can

+1 on interest in Retatrutide.

 

[GaulEmilRenzo]

I'm asking IN HERE, because I'm talking about THIS SOURCE'S raws.

I have these spoons https://www.amazon.com/gp/product/B0764HY98X/

Get yourself some coke scales and weigh them if you don't want to make a suspension/solution.

 

[Heavy Iron]

Best thread ever for those who want to cap

How To Cap "101"

This is how I do it. No 2 people probably do it the same. First off, there is 1000mcg's in a mg. There are 1000mg in a gram. Can you guess how many grams in a kilo, lol. The powder that is the main compound of desire is called active ingredient. The powder used to fill up space is called...

thinksteroids.com

XKawn Is number one

or as our neighbors from the south say

¡XKawn Es Numero Uno!

Here's an example with math I made a while back for capping.

1. Fill a capsule with your filler, including tampering if you plan on doing so with your ‘real’ capsules.

2. Determine how much filler weight occupies this specific capsule. This will give you a weight/volume ratio and you can determine the
relative density of the filler.

3. Fill a capsule with your active ingredient (Anadrol, DNP etc.), including tampering if you plan on doing so with your ‘real’ capsules.

4. Determine how much active ingredient weight occupies this specific capsule. This will give you a weight/volume ratio and you can determine the relative density of the active ingredient.

5. Now you have to do the ‘more involved’ math to determine the correct ratio of filler to active ingredient.

1) Determine the dosage of active ingredient you’d like per capsule.

2) For example you want 10mg Dianabol capsules. You determined your filler density to be 500 mg per capsule and your active ingredient density to be 400 mg per capsule.Now you have to set up the two equations and then cross multiply and solve for the unknown.

10 mg Dianabol = Unknown mg Filler

400 mg Dianabol = 500 mg Filler

10 mg Dianabol x 500 mg Filler = 400 mg Dianbol x Unknown mg Filler

(10 mg Dianabol x 500 mg Filler) / 400 mg Dianbol = Unknown mg Filler

Unknown mg Filler = 12.5 mg

NOW you take the total quantity of filler that will fit in one capsule and subtract the Unknown Filler amount we just calculated.

500 mg filler – 12.5 mg = 487.5 mg filler per capsule

Now you’ve got all the information you need to make 10 mg Dianabol capsules. For every capsule you make you need 10 mg of Dianabol
and 487.5 mg of filler, so for 50 capsules just multiply these two numbers by a factor of 50.

 

[Rido]

Here's an example with math I made a while back for capping.

I feel like the bigger the capsule, the less precise you need to be with the active drug.
for example, a 00 is more at mercy of the filler(can fit nearly 1gram of filler), versus a 1 which is very small.

I am assuming this is with geometric dilution?

When I make filler for 25 var, my target active drug is 2.76% for the mixing powder.

 

[jJjburton]

I'm looking for threads on this, not finding anything specific about anavar. I see people talking about humco or something, but don't know. Do we have a easy thread to learn from?

Its easy.

add powder to suspension to ML amount. Thats all…

 

[Qingdao Sigma Chemicals]

Flibanserine (Female viagra)
Janoshik NMR report​

(raw data attached)

 

[cln912]

Doe anybody have an expirience with pharma seglutimide aka Ozempic. If so how does it compare with QSC one. Trying figure out weekly dosages.

Worked the same for me. I felt no difference. Some people say it’s weaker but I didn’t notice.

 

[Zoidberg]

Yes I believe I answered all unless your emails was sent in the past 5 hours. In case I missed it send a new one.

If your email was about codes you will receive a reply tomorrow

Resent my email a third time from a different email address just in case my Protonmail (to your @tutanota.com) is getting blocked.

 

[buffaloindierock]

+1 on the Retatrutide and the orforglipron, although the orforglipron will likely be challenging since oral GLP-1s require other ingredients so that it remains bioavailable despite being washed in stomach acid.

 

[dan_hnnng]

Anybody have a dosing for Aromasin using the Microsppons??

The search function comes up with nothing but I swear I've seen it here?

 

[Qingdao Sigma Chemicals]

Anybody have a dosing for Aromasin using the Microsppons??

The search function comes up with nothing but I swear I've seen it here?

10mg the orange one. I did it.

 

[clearheaded]

I think folks should be wary of trying a drug not even entered into phase 3 when real side effects start showing up.... something SOO powerful to curb food intake by likely 50-75% we can assume there will be alot more gastrointestinal issues Gerd gas etc, aswell as perhaps more potent in creating thyroid cancers and of course won't show up for many years. funny as imagine alot of these same folks wanting to take untested drugs and were scared of a vaccine even after billions were given and was safer than the more traditional vaccines for the same purpose.

at any rate unlikely will be good for BB as simply too powerful and will loose muscle and connective tissue.... anyway, just wait another couple years and we will have far more info. esp when these GLP are relatively new (and will still be several years to see if more side effects start popping up) and an uber powerful chemical that is untested is prob unwise, not only that but if becomes available to UGL before pharma and 1-2 people have a bad reaction rest assured will be MAJOR crackdowns backed by pharma lobbying $. remember your seeing ONLY big Pharma's press releases that of course will skew things very positively in order to keep investment/stock price. remember its only hundreds of people not even thousands...

 

[freakyjacked29]

I think folks should be wary of trying a drug not even entered into phase 3 when real side effects start showing up.... something SOO powerful to curb food intake by likely 50-75% we can assume there will be alot more gastrointestinal issues Gerd gas etc, aswell as perhaps more potent in creating thyroid cancers and of course won't show up for many years. funny as imagine alot of these same folks wanting to take untested drugs and were scared of a vaccine even after billions were given and was safer than the more traditional vaccines for the same purpose.

at any rate unlikely will be good for BB as simply too powerful and will loose muscle and connective tissue.... anyway, just wait another couple years and we will have far more info. esp when these GLP are relatively new (and will still be several years to see if more side effects start popping up) and an uber powerful chemical that is untested is prob unwise, not only that but if becomes available to UGL before pharma and 1-2 people have a bad reaction rest assured will be MAJOR crackdowns backed by pharma lobbying $. remember your seeing ONLY big Pharma's press releases that of course will skew things very positively in order to keep investment/stock price. remember its only hundreds of people not even thousands...

Informative post but the glp1 has had more than 10 years of phase trials on it up until now hence why we know of the possibility of thyroid cancer etc. I don’t think it’s anymore negative than other medication I’d go to say superior for insulin sensitivity

But yes there could be more issues like anything but if it’s prescribed up to 2.5mg for weight loss we know enough for it to be safe

 

[LGOP528]

I feel like the bigger the capsule, the less precise you need to be with the active drug.
for example, a 00 is more at mercy of the filler(can fit nearly 1gram of filler), versus a 1 which is very small.

I am assuming this is with geometric dilution?

When I make filler for 25 var, my target active drug is 2.76% for the mixing powder.

I was looking at fillers for var but all of the suggested ones have a much lower molecular weight. Is this for ease of calculation? I am guessing this is not needed because the volume of var is typically small? I have seen people say that it needs to be the same molecule weight but to me if you make a homogeneous mixture, it shouldn’t matter from a concentration standpoint?

 

[Country Club Hero]

+1 on the Retatrutide and the orforglipron, although the orforglipron will likely be challenging since oral GLP-1s require other ingredients so that it remains bioavailable despite being washed in stomach acid.

Same here. I bet the Retatrutide will be an instant best seller. I know I will buy a couple kits day 1

 

[Augains]

Not happening

Why’s that ?

 

[clearheaded]

Informative post but the glp1 has had more than 10 years of phase trials on it up until now hence why we know of the possibility of thyroid cancer etc. I don’t think it’s anymore negative than other medication I’d go to say superior for insulin sensitivity

But yes there could be more issues like anything but if it’s prescribed up to 2.5mg for weight loss we know enough for it to be safe

lol u are pretending u have long history of clinical trial knowledge(and have access to internal data) and can determine how safe something is by 500 or so people using it for short period in only phase 2 is not only unwise very dangerous. yes we have years of GLP knowledge but the widespread long term drug use we don't(ie 10s of thousands using the drug for 5-10 years). this is no different. remember EVERY SINGLE new drug type is 100% awesome and safe until it isn't... usually around 15 years of widespread use before things pop up... may be causing renal issues and will take a long time for them to start showing up in those susceptible or other slow build up of toxins because of low gastric motility. fairly common knowledge its healthier to have things move through you faster

anyway, no one will convince folks that its reckless and unwise to use a drug that isn't even in phase 3(where they actually look for side effects) never mind phase 4. not only for there health but the attention it will garner of folks taking a drug before its even released. ie need to look at larger picture.

but I agree may be awesome! cheaper and easier and potentially even better than ozempic or wegovy.. also may cause cancer at higher rates because more potent affinity, also possible it affects other organs that we are just not aware of yet as soo much we don't understand. fairly cavalier to say you KNOW its superior and 100% safe just because GLP have been studied for 10 years and saw press release by the company. who knows maybe it causes pancreatitis at higher and more severe rate and actually give people diabetes after years of use never mind affecting thyroid in unknown ways. if this becomes available and folks are promoting it like yourself may want to say goodbye to cheap and easy access to other GLP-1 peptides. Big pharma won't be happy and gov will say its unsafe and the hammer will drop, happened many times already and pressure will be put on china to clamp down on manufacturing things that are under patent. dont say I didn't warn u.

that being said great potential in these types of drugs and may be wonderful way to really prevent diabetes/obesity and all the issues caused by them. heck I wonder if gastric sleeve surgery will almost become a thing of the past.

stay safe!

 

[Heavy Iron]

I feel like the bigger the capsule, the less precise you need to be with the active drug.
for example, a 00 is more at mercy of the filler(can fit nearly 1gram of filler), versus a 1 which is very small.

I am assuming this is with geometric dilution?

When I make filler for 25 var, my target active drug is 2.76% for the mixing powder.

For sure. Those are some hefty caps but I was new to capping. Lol. And I basically just dumped all the powder and mixed it as thoroughly as I could rather than adding a little at a time and mixing that way. I'm about to cap a shit ton of anavar, dbol, and Cialis so I need to find a way to be more precise. Might shoot you a dm when the time comes if you don't mind!