MESO-Rx

Anabolic Steroids

Triple B Solutions

TripleBSolutions said:
I apologize but I won't be sharing my stats.

My filler is MCC - or Microcrystalline Cellulose. It is a superior pharmaceutical grade filler. I calculate the weight of the filler, capsule, and API. From there its basically a volume equation that gets converted to weight. The calculations I do are much more accurate than the down and dirty method, which is basically filler weight x amount of capsules - API. The API and Filler are put in a V-Mixer for at least 45 minutes. A V-Mixer is a commonly used mixer for pharmaceutical applications.

I generally make orals in batches of 1,000 capsules.

I have been selling my products for roughly 3 months.
Click to expand...

Thanks for the explanation. I think you’re skipping a few basic steps on the raws before putting them in the blender. I also think you need to take in account the density of the raws vs your pharma pixie dust filler.

I’ll have to look again it’s been a while but I think Spartan used a V-blender and his caps sucked.
 
CompoundConcentrationSizePrice
Test Enanthate300MG/ML10ML25
Test Cypionate250MG/ML10ML25
Sustanon250MG/ML10ML25
Test Propionate100MG/ML10ML15
Test No Ester100MG/ML10ML25
DHB100MG/ML10ML35
Mast Propionate100MG/ML10ML35
Mast Enanthate250MG/ML10ML45
Deca Durabolin300MG/ML10ML30
NPP100MG/ML10ML20
Tren Enanthate250MG/ML10ML50
Tren Acetate100MG/ML10ML35
EQ300MG/ML10ML30
Primobolan Enanthate200MG/ML10ML100

Orals


CompoundConcentrationCountPrice
Anavar50MG3060
Lady Anavar10MG3025
Lady Anavar5MG3020
Dianabol50MG3030
Winstrol25MG3020
Anadrol50mg3030
Superdrol10mg3020

Ancillaries


CompoundConcentrationCountPrice
Nolvadex20MG3030
Clomid50MG3030
Aromasin12.5MG3030
Cialis10MG3020
Viagra50mg3030
HCG Kit5,000 IU150
 
BigBaldBeardGuy said:
Thanks for the explanation. I think you’re skipping a few basic steps on the raws before putting them in the blender. I also think you need to take in account the density of the raws vs your pharma pixie dust filler.

I’ll have to look again it’s been a while but I think Spartan used a V-blender and his caps sucked.
Click to expand...
Once you find out the weight of the compound in the capsule you can calculate the volume it fills, you can then calculate the amount of filler needed.

I cannot speak for any other source but a V-Mixer is the "gold standard" of UGL oral powder mixing. My capsules definitely do not suck.
 
TripleBSolutions said:
Once you find out the weight of the compound in the capsule you can calculate the volume it fills, you can then calculate the amount of filler needed.

I cannot speak for any other source but a V-Mixer is the "gold standard" of UGL oral powder mixing. My capsules definitely do not suck.
Click to expand...

But let me guess, we can’t see a picture of the “gold standard” V-mixer for OPSEC reasons. We just need to trust you, bro.

And your capsules definitely do not suck because.... testing? Nope don’t have that and you only sent one oral sample in. Based on extensive 3 months experience of making orals? Feelzzz? Bonerzzz? And gainzzz reports from the bros at SST?

If you read any of the source intros, you’d see guys that tried to source here before providing testing and it never goes well. Their thread is a failure and they lose momentum.

How did you send the samples in to Jano? Mail or courier like Fed-Ex? If it’s mail he might not get them for SEVERAL MONTHS. If it was FedEx why didn’t you send in more samples?

You’re wasting everyone’s time. Why don’t you, and the three guys that joined this week to sing your praises just go away, wait for these sample results, and come back in a few months.

And get a better format for your price list. You might have to actually go thru the 2 minute effort of typing it out in the forum instead of cutting and pasting. There’s too much dead space on it.

Just a couple suggestions. Merry Christmas.
 
@BigBaldBeardGuy
maybe i am wrong, but to explain a little more about my reference to stan:

Didn't stan show up and skirt the vetting process because his previous customers basically came here and gave the "gtg"?

And when he was outed as xkawn and people attpemted to re-vet, he refused to post lab pics for whatever bs reason?

And then went awol.

Just pointing out similarities.
 
BigBaldBeardGuy said:
But let me guess, we can’t see a picture of the “gold standard” V-mixer for OPSEC reasons. We just need to trust you, bro.

And your capsules definitely do not suck because.... testing? Nope don’t have that and you only sent one oral sample in. Based on extensive 3 months experience of making orals? Feelzzz? Bonerzzz? And gainzzz reports from the bros at SST?

If you read any of the source intros, you’d see guys that tried to source here before providing testing and it never goes well. Their thread is a failure and they lose momentum.

How did you send the samples in to Jano? Mail or courier like Fed-Ex? If it’s mail he might not get them for SEVERAL MONTHS. If it was FedEx why didn’t you send in more samples?

You’re wasting everyone’s time. Why don’t you, and the three guys that joined this week to sing your praises just go away, wait for these sample results, and come back in a few months.

And get a better format for your price list. You might have to actually go thru the 2 minute effort of typing it out in the forum instead of cutting and pasting. There’s too much dead space on it.

Just a couple suggestions. Merry Christmas.
Click to expand...
Samples have been delivered, results should be available in early January. Bloodwork is coming in consistently at a 6.5x + multiplier, most at 8x and above.

I have already discussed my plans to provide consistent testing on my products. I have not sought out any help on Meso or any "shills". I have requested permission to share bloodwork. I actually respect the members here who take the time to verify new sources and protect members who may not have experience.

I am open to presenting my products in another format, do you have a preferred format that you would like to see?
 
BigBaldBeardGuy said:
But let me guess, we can’t see a picture of the “gold standard” V-mixer for OPSEC reasons. We just need to trust you, bro.

And your capsules definitely do not suck because.... testing? Nope don’t have that and you only sent one oral sample in. Based on extensive 3 months experience of making orals? Feelzzz? Bonerzzz? And gainzzz reports from the bros at SST?

If you read any of the source intros, you’d see guys that tried to source here before providing testing and it never goes well. Their thread is a failure and they lose momentum.

How did you send the samples in to Jano? Mail or courier like Fed-Ex? If it’s mail he might not get them for SEVERAL MONTHS. If it was FedEx why didn’t you send in more samples?

You’re wasting everyone’s time. Why don’t you, and the three guys that joined this week to sing your praises just go away, wait for these sample results, and come back in a few months.

And get a better format for your price list. You might have to actually go thru the 2 minute effort of typing it out in the forum instead of cutting and pasting. There’s too much dead space on it.

Just a couple suggestions. Merry Christmas.
Click to expand...
Literally I don't see a single reason why showing a pic of the capping machine/the whole equipment (not the lab itself) could affect the OPSEC.
Normally when a source has a bathtub lab the don't want to show it for any reason, same as with the lab equipment.
Also I went to SST to take a look, your mentor tests everything and he wants everyone to test his products, you in the other hand only sent a few samples... Why? And don't tell me it's for economic reasons, because one good piece of lab equipment can cost more than testing your whole range with Jano.
 
JohnDoeDoDoe said:
Literally I don't see a single reason why showing a pic of the capping machine/the whole equipment (not the lab itself) could affect the OPSEC.
Normally when a source has a bathtub lab the don't want to show it for any reason, same as with the lab equipment.
Also I went to SST to take a look, your mentor tests everything and he wants everyone to test his products, you in the other hand only sent a few samples... Why? And don't tell me it's for economic reasons, because one good piece of lab equipment can cost more than testing your whole range with Jano.
Click to expand...
Perhaps you are missing my first post. The equipment I show is not cheap by any means. It would be rather hard to use a Laminar Hood in a bathtub.

I want and encourage testing. I would love to get some blind tests of my product. I was hoping to have blind testing done by now. MadBret and I had a discussion about this earlier in the thread.
 
shackleford said:
Without lab pics, you're just a reseller
Click to expand...
He did actually post up a couple of pictures at the beginning of this thread showing some lab equipment but I agree, more is better.

And the more thorough he is when it comes to answering questions, the less headache he will have later. It definitely doesn't work to side step, bs or ignore shit around here...

@TripleBSolutions
The more pictures of lab equipment, the better. As I've already mentioned, I think you have came in here with a pretty decent introduction but vetting is an ongoing process. I'm certainly not an authority on making caps, but it seems like @BigBaldBeardGuy would like to hear a bit more details.

In a perfect world, you would have had all of your products tested before you made your intro, but we don't need to live in the past nor is this a perfect world. Do yourself a favor and take some of the money that you've made from customers who were comfortable to try you out before the testing results came back and send off some more shit to be tested.

If you choose to test every new batch of raws and finished oils, you will have found yourself a good niche here.

Please elaborate on the capping process as much as possible and post up some more lab pics, including the v mixer.

Looking forward to those lab testing results.
 
@TripleBSolutions
Also, most sources just post their lists on paste bin. It is convenient because you are able to update as stock changes etc and it will also update on old posts at the same time, leaving less room for confusion about what is or isn't available.
 
MadBret said:
@TripleBSolutions
Also, most sources just post their lists on paste bin. It is convenient because you are able to update as stock changes etc and it will also update on old posts at the same time, leaving less room for confusion about what is or isn't available.
Click to expand...
Yes sir, I agree it seems like the best method and I attempted this. Although many sources get by with this method for years, my pastebin was reported and removed promptly.
 
TripleBSolutions said:
Yes sir, I agree it seems like the best method and I attempted this. Although many sources get by with this method for years, my pastebin was reported and removed promptly.
Click to expand...
Damn. Been a lot of funny business around here lately between the hackers and the dickhead extortionist. Not the end of the world though, either.
 
You must log in or register to reply here.

Similar threads

M
My experience with Shanghai Sigma Audley (SSA)
2
Replies
22
Views
2K
forhealth87
F
Minty
Mint Anabolics - US Domestic Source
8 9 10
Replies
180
Views
11K
FastBun
F
M
Is it worth it to use QSC oils?
4 5 6
Replies
103
Views
3K
PaintDrinker
PaintDrinker
F
Seeking Raw Material Supplier - Assistance Needed
Replies
15
Views
823
iris
iris
Yura(HYB)
HYB (Best Service and Product - International Shipping)
40 41 42
Replies
825
Views
62K
freedom69
freedom69

Sponsors

Latest posts

Back
Top