USA DOMESTIC ONLY

[Monsterman12]

I understand you not wanting to pay for shipping to jano multiple times bc its expensive too and it's not like u tried to sell it without the results back. Just making sure u know to do it that way in the future bc ur raw supplier could keep guaranteeing you gold and send u shit one time.

Thank you so from now on its best to always send in the raws then brew ?

 

[Monsterman12]

I understand you not wanting to pay for shipping to jano multiple times bc its expensive too and it's not like u tried to sell it without the results back. Just making sure u know to do it that way in the future bc ur raw supplier could keep guaranteeing you gold and send u shit one time.

You are correct eventually they may

 

[lifter6973]

I remember TRT Master on Xkawn and a few others but don't see them as much i don't know them but back then they always had good posts Mistersupergod he was good

Yeah, the guys I listed, they are all knowledgeable with a good sense of humor and great positioning of sarcasm.

 

[Sp2.0]

You appear to be a train wreck. I'm sure some members will dedicate time to you in one way or another. In all honesty I usually shit on start ups and follow where they go but in this case I couldn't imagine anyone messing with you based off your early postings. I'm sure some will because they always do but you can't seem to keep a train of thought.

 

[Monsterman12]

You appear to be a train wreck. I'm sure some members will dedicate time to you in one way or another. In all honesty I usually shit on start ups and follow where they go but in this case I couldn't imagine anyone messing with you based off your early postings. I'm sure some will because they always do but you can't seem to keep a train of thought.

I do apologize the thank you intro part was long and excessive and too much everything else is solid ... thank you for your honest opinion and thoughts..

 

[TrennedOutLunatic]

Dear
Meso rx I would first like to thank this entire forum and community for being here I would like to thank every member new and old past and present Intermediate and all the original vets that are still active and still here. I thank everyone for sharing their opinions and thoughts good and bad I would like to show my appreciation and gratitude to the following members for answering questions big and small and in depth and making sure I was always helped when I needed it. BIGBALDBEARDGUY,SHACKLEFORD,SILENTLEMON1011, MISTERSUPERGOD, MILLARD BAKER, MANDS, TRENNEDOUTLUNATIC, and last BULLDOG413 over on homebrew section. I would again like to thank this entire community and forum of great People to all the members and everyone involved that make this happen. Meso would not be Meso without everyone here involved To the members above thank you deeply for all your help and guidance thank you for your honest opinions and feedback most importantly thank you for always answering my questions. Thank you for helping me along the way to understand all the rules on this forum Thank you for teaching me how to do things the proper way thank you for telling me the proper steps to be able to contribute The free advice was beyond helpful in my decision to begin this journey. I have learned everything I know through and from Meso rx forum members and all the thousands of postings that are offered for free by some of the most experienced and only the most knowledgeable men in the game today. Being respectful showing someone that I'm wanting to learn from them showing appreciation for what they tell me I think goes along way on Meso not being a dick or being rude or A know it all. All the members here deserve nothing but respect for what they do and what they try to teach honest thoughts and rude thoughts the raw truth its an amazing feeling when someone wants to help you succeed here and do the best you possibly can. It has been great for me I know not everyone has the same experience but for me personally it has been a great opportunity to be here. Being respectful to someone more knowledgeable then myself treating them with appreciation that they deserve for the shared information that they are trying to pass on to want to teach me and answer all my questions again is amazing. I greatly appreciate this community I can not say it enough or say thank you enough I feel a lot of people cant accept that there are other people who exist that are smarter or know more things that are better in some areas of knowing things by years of trail and error. So it makes it really hard for people to learn from others I'm proud to say that I have learned from all the members here and Ill keep saying it. Being honest here is important being able to accept criticism is a good thing here on Meso I feel. I have Learned so much here over the years from the members reading all the postings I learned a long time ago this community the people you guys know what your talking about. Its as simple as that over the years and learning everything from everyone here it feels like a second family to me It always has. For the last 9 years I have browsed the forum very stealth always anonymous never had an account never posted anything or chimed in on anyone's business occasionally I would ask or private message someone for a more in depth question I had or if I couldn't understand the posting then I would get help. But for years I browsed every section and any new post I read I don't have a handle here my account says I'm very new I don't know anyone other then the few that I have spoken to privately. I don't have a degree in chemistry and pharmacology I'm not a filtering master I learned everything I know from reading MESO RX postings for years I learned from members here on this forum and I'm more then thankful everyday they exist and this forum existed for so long over the years. This is my first batch I have done ever in such a large volume I have always brewed for myself in small amounts again l learned everything I know from the homebrew section and asking questions and being respectful of others. I have always been stealth and quiet and kept to myself but learned as much as I could over the years browsing and reading Meso. I can Say I have a really good background in IT and security but I'm no amazing chemist with secret recipes and no PIP products and thousand dollar lab set up with the top of the line filtering systems in place. But I'm honest I don't burn bridges and I don't act like a know it all if I don't know how to do something ill ask the forum I'm not going to lie and be someone I'm not. I'm clean I follow good sterile guidelines many friends in the medical field my set up is very simple and efficient. I do good daily on the forum and off I like to please other people as much as I can in life. I have learned from this entire community of great people some of the smartest if not the smartest forum guys around on the internet today I will not ever quit saying it. The endless amount of things I have learned here is more then I have ever learned from the 9 coaches I've used over the years nothing has ever got me results like this forum did. I have never contributed to this community I asked questions and took information and left never showed the Appreciation that I should have shown back then especially to the members. This website the members there is not another place like it anywhere online today not one website compares to this community period. This is the last real website that anyone can share ideas thoughts share experiences its never ending. A very long past due thank you is owed to everyone here every single member everyone apart of the community past Present I thank you from the bottom of my heart for the things you accomplish here every single day. Thank you for teaching me everything I know Thank you for always answering my questions and thank you for making the most informative postings everyday for people like me to browse and see and learn. Thank you for all the free information I feel that labs or anyone moving product should thank the community a lot more then what they do now. To be successful you need to have the community they make the labs prosper without the community there are no sales without the community liking you there is nothing to work from. Its the people the members that make things happen nice labels and a great lab set up do help maybe a really cool lab name but in the end its the meso rx members who have been here making things happen I know everyone has a opinion but these are my thoughts. So again thank you MESO RX forum members.

I mean,I get it..you are grateful for meso.
I got tired there,come on.
You could have just showed tits to show your being grateful. We are simple people here.
Me...personally? Pretty flexible too.
I accept other type of pics too..

Going straight to the buy from me

Thank God!

my products are filtered twice and have boxes and hologram labels and zero PIP and have a special coating on all my labels that make them shine I don't feel that is good either. I learned from the best brewer ever he taught me everything I know I was his rep we were partners he taught me the best recipes

please let's not talk recipes. It is two simple products.

and sterile procedures ever I can do any kind of brew That does not work for me either I don't do that I learned from multiple members on meso rx in the past many years ago and I have even learned new stuff recently from multiple members here I don't think you ever stop learning on meso the knowledge keeps growing. I did my best on labels I do not think they are important at all period some of the best gear I ever used had the names written in sharpie on the bottles but I understand that to some members here the labels are appealing and wanted so I did take time making them.

Do your labels write "Rx" on them?
I am joking.

I feel testing being sterile and clean filtering and rubber stoppers are more important and security I do not even have or want a lab name I do not want to be like every other lab with a cool sounding lab name I like stealth and anonymity I don't want a lab name coming back tied to me if anything ever happened I feel its best not to have one at all.

I dig the no name thing.

I think vials are just as important also. I wanted to offer the meso rx community 50ml bottles of only two compounds I honestly cant keep up like most people with 50 different things I'm lucky I can accomplish what i'm doing now being just me I like simple products I like test and tren and I like a simple affordable price I like life simple as much as possible I do plan to bring EQ in also in a 50ml but for now im simple just two things. If I can help members save money down the road then I will feel very happy within myself for all the information that I learned from the people here for years then the least I can do is sell items that are only the most affordable I do not care about money or profit I really don't. The goal for me here and to even be doing this is to give back to the meso rx community and help people save money down the road or maybe a bigger bottle that will last awhile so members can cut down on ordering and stay safer i don't know but my bottle will always be affordable.

50ml. I dig.

I don't have have anything under my belt other then the expertise of learning from everyone here and I think that in itself is the best experience anyone could ask for or have vs a chemistry degree and a breaking bad lab set up. I plan on ding this for as long as I can to Contribute for many years here on the forum I do not have a exit strategy I really enjoy doing everything that I learned here from everyone and I like using what I have read.

didn't you learn from the best brewer ever,too?

I am a single one man show no kids

Zyzz it bro.

with very solid discrete location for all brewing practices I do not sell locally and I do not sell to any friends I have never sold anywhere else ever on any other forum or locally definitely my first time and i wanted to be on meso. Its the only forum I would ever want to be involved with. If the community and members here do not think its a good idea or needed at this time then it will end here I will respect the decision and not try anywhere else or sell anywhere else Meso is my true home and the communities input matters and Ill have about 4 years worth of gear to use. I think the rules state that we are not allowed to speak about where we get our raws directly so I will not say but as far as I know the supplier is not in anyway connected to meso rx or any other forum online I have not asked them directly but I can not find them anywhere on any open forum online advertising. For personal brew and small amounts I have used them for 9 years and never had any issues. I'm not sponsored by them they don't give me any discounts or better deals our relationship is all business. I'm not sponsored by any company I buy my supplies from Im sure I pay the same amount as everyone else if not more. I personally only use Filtered Cotton Seed Oil I always pay more and buy it prefiltered I have never had any issues using it I feel pre filtered oil helps with PIP I understand there are many different opinions on PIP and where it comes from and what it is could be the hormones or the BB/BA but filtered oil I have never had it with cotton seed being prefiltered. It seems a lot of the bigger Pharma companies buy it in bulk and use it since its so cheap you can still find a lot of the prescription testosterone made with cotton seed oil and of course most are using grapeseed oil but back then it was always cotton seed oil in All the TRT stuff.

I fully understand the MESO RX community rule regarding a donation I know who to contact and I know the proper donation amount it will be done this week. I have the banner but my banner is not from making the proper donation amount I will make sure it gets done ASAP.

Nice.

My lab when I brewed was in a very discrete location with a very wide zero airflow room with just enough light to see what I was doing and enough room to work in. The security of the location as all my locations are solid I do not ever keep anything from a brew I throw every single item away as soon as i'm done so currently I do not have a lab I really think its best not to have anything connected to the location or myself not even a hot plate or a beaker I like being as anonymous as I can not that my location could ever be jeopardized but there is always a chance with everything no matter what no matter how safe you play or how solid security is. Much respect to guys that post here that talk about moving the lab or going to another location with the lab set up I personally will not do that I buy everything I need for a batch and brew in one day then throw everything out that night. My system of throwing everything away is a entire different scenario and set up I do not just walk to the nearest dumpster at a walmart and toss everything in the trash. The system in place to throw out all equipment is SOLID its a system and its done properly as soon as i'm done brewing everything is gone even a glass stirring rod. All my pictures posted below of my lab the things I used are now miles and miles away I do not have any of it every single brew from here on out that i make is with a brand new set up and all brand new equipment at anytime members can request pictures and everything will be different from the hotplate to the vacuum pump to the beakers everything. I keep my word and throw it all away any extra vials that I buy in bulk or any extra rubber stoppers any oil left over or BB/BA I toss it all I keep nothing and I cant stress that enough. My 10000ml beaker featured in the picture was $210 total I threw that out I keep nothing and always start brand new.

My lab that I did use was clean and efficient in a very very discreet location that only I know about I ended up buying a brand new tent the size was big enough to fix a brand new 72 by 36 stainless steel work table inside of it industrial style I usually zipped myself in and out of the tent. Everything within the tent was fully sealed no openings or windows or air that got through it had just enough light to reflect the back side of the tent so I could see what I was doing and enough light was let in. I was using a painters suit with goggles and hood but it got really hot using that so I just started using sterile hospital grade rubber gloves and changed them out frequently and since im really paranoid about being clean I did wrap the tent walls floor and entire table with blue medical avalon stretch papers it was not needed but it made me feel like everything was top notch.

Washing/Cleaning/Cross Contamination

None of that is a issue I do not wash anything I'm not comfortable doing that and I never will be I prefer just to buy everything Pre Sterilized and ready to use Triple Vacuum sealed equipment some companies especially the ones I get my glassware and equipment from will always have proof of sterilization like a certificate of conformity or a full sterility and Endotoxin Certification they always no matter what email it or send it with the order so I can verify the cleaning upon opening everything and using it also the certificates provided you will know that its done up to FDA standards in a FDA approved facility the sterilization. I buy nothing opened that needs to be washed or cleaned I never ever reuse anything and never ever will I never did when I brewed personally for myself I will never ever risk cleaning equipment much respect again to labs that do but I will not i'm way to paranoid about cleaning something and not knowing if I really ever cleaned it good enough or if i missed something I will not do it . Everything is ready to use you pay far more then you ever would buying equipment that has been pre cleaned but I will always pay more to be safe vs spending time and cleaning items. Plus I don't want to keep anything related to brewing so it works out for me I don't need to clean since I throw everything away. I buy equipment for one hormone and then buy another set up for the other hormone each gets its own everything nothing is shared nothing is cross contaminated ever.

VIALS

I buy all my 50ml vials open and ready to fill and use Triple layered vacuum sealed I will not wash or autoclave bottles myself I much prefer to pay more and allow medical professionals do that. They are depyrogenated and sterilized and Autoclaved Pyrogen free inside and out vials full sterility and endotoxin certification upon purchasing they meet for the following USP requirements 788- for particulate matter 71-for sterility and 85 for bacterial endotoxins sterilization is performed in a FDA inspected facility that complies with cGMP requirements there is no risk of any contamination during the oven exit or further handling or when being packaged and sealed the company also told me since they are packed under vacuum it guarantees the sterility of the vials and also provides tamper evidence . Down below are pictures of the sterilization certificate that I buy mine open and pre sterilized and ready to use pre heated Autoclaved the pictures had a lot of information that I did not want shared order numbers and payment amounts obviously I use full anonymity im very stealth when ordering items and equipment but I still do not feel comfortable sharing information of things that I have purchased online I can however request that they somehow take a lot of that information off and send me something that I feel comfortable posting here I did take the best possible pictures with most the information cut out I also posted some pictures below of how your suppose to properly open the vacuum sealed vials you can not just rip into them and use them right away the company always sends me a proper procedure on how to open them I practice all proper sterile techniques I follow directions everytime on how to open them proper so I wanted to share that so hopefully everyone cant trust I do things the ring way at all times. I also have a Hydrolytic resistance glass grains test they always send me with every order of bottles a certificate just for that but I don't feel that is really to important to share. All bottles are water injection laminar flow hood everything is done proper. I understand that everyone here would prefer to see a medical grade Autoclave in my pictures I personally feel more comfortable with buying them done and letting a medical team handle it for me I just wouldn't want to mess anything up or not autoclave them long enough to many scenarios in my opinion I throw everything away I cant see myself throwing away a Autoclave every single time after I brew as they are the most expensive item from

Costs add up here I see.
sure thing is that if you walked into my wife's office and asked her to sterilize vials...she would shit on you.
Someone confirm if this is doable?

2500$

wife's dry heat 200-300$ used.

and up I wouldn't want to keep one anyways but if meso members prefer I invest in one then I will asap for the community and so that members know Im treating the bottles to the highest standards.

Rubber stoppers/

I use APTAR PHARMA rapture resistant high grade bromobutyl material I feel those are sufficient rubber stoppers if not the best from doing some Research. I did read that most big pharma companies use the exact same kind of rubber stopper and they are made in the USA. I ended up buying a small sterilization box you can see it from my pictures it heated up to 350 degrees and had steam heat and a dry heat option I purchased the small Autoclave bags the blue medical kind usually used for medical tools then they autoclaved them in the bag but I ended up putting the rubber stoppers in the medical bag and then placing them inside of the heating box I bought. Now from my research which please anyone correct me if i'm Wrong Im in no way saying that I'm right but I read 250 degrees for 15 minutes and then 230 degrees for 15 minutes is for dry and steam heat sterilization and that is the normal medical procedure to sterilize so that's what i did for all the rubber stoppers before capping and crimping them onto the bottles.

When using the autoclaves,I always go way overboard regarding duration and temperature.
Your numbers sound right,but I don't best a testicle. I just overdo it and get done with it.

Filtering

So for the Joanlab Buchner set up I used a Nylon Membrane filter 0.22um round filter paper membrane to sit between the Buchner set up I went with Nylon because from what I researched and what I learned from Meso Rx forum members over the years up until now and since filtering is the most important thing its a solvent resistant membrane and widely used for filtering aqueous solutions as well as organic solvents and nylon is very strong and flexible and it has very large pores uniform prores from what i read and what I learned on meso. I saw a post years ago on meso it said the 0.22um and the 0.2um filter membranes are indistinguishable the performance is the same the only difference was designation of their pore size rating so basically they are equal filters but I could be wrong again if I am please correct me with the proper information so the 0.22 is the smallest used in patient care and removes bacteria but the 0.2 removes microorganisms from heat sensitive solutions both are considered sterilizing membranes though .

I think I've seen .10um too.
I use 0.22. Will keep using that.

Then I threw away the Joanlab equipment and wanted to test out the PVDF bottle top filter set which it came in a sterilized ready to use bag already connected I connected my vacuum pump but the lower receivers kept cracking my PSI was not high at all but it still cracked each lower receiver. So I started using the tops instead and screwed them onto a glass pyrex 1800ml media bottle and filtered into that vs using the bottletop lower receiver . For the PVDF it was a sterile 0.22um filter top . back then brewing for personal use for myself I have always used a PES but from reading postings on meso I understand that is not a favorite to be used but I personally have never had issues with it even after pinning but for this route I used PVDF I understand the difference between using PVDF AND PTFE AND PES it seems PVDF is the favorite on meso vs the others that are more for different solutions but even the PTFE vs the PVDF i think would both equally be good the PES it is still sterile when your done I definitely didn't want any conflicts with filters so i went with PVDF which i'm sure can still be debatable I never ever filter twice the only reason why I filtered my first batch twice was because I wanted to use a buchner set along with the bottle tops so this is the first and only batch that will ever be filtered twice I personally think that's sales tactic to be honest I think filtering once is good enough if the equipment is good.

I bought 35 PVDF complete filter bottle top sets already put together in a sterile bag ready to be opened and used each PVDF top can hold 1000mls of solution so for each time I filtered I would filter 1000mls and then replace the PVDF top with a new filter then add another 1000mls of solution and filter that then change the filter again so every 1000mls got a new filter there is really no reason behind that other then i did not want to throw away 35 brand new bottle tops after my brew so i tried to use them all in one day.

SECURITY / SHIPPING / PRODUCTS / PRICE /

My SECURITY IS SOLID PERIOD
My background was IT for awhile I believe in full anonymity and being anonymous I may have learned everything about steroids from everyone here at meso rx but my background and security is on point especially for something like this I understand the conflict with members and how they feel about Protonmail and Tutanota being connected with LE but I firmly believe if your VPN is solid your good I pay for the highest security for both accounts but I have a lot of other programs I use two laptops

What OS?

at all times for everything if members prefer another way of communicating vs the accounts I have then please email me and we can figure it out but speaking about security in the open i don't feel is wise or safe but I will say this I have used TOR in the past personally way to slow I have used NORD which the military encryption alone you would think its never been hacked but it was hacked once not by LE but by hacker and I have used NORTON but norton only offers about 30 host countries and zero upgrades or features. Nord since its based in panama was my go to its not part of any international surveillance alliances and it has the AES-256 encryption but since the hack I will not use it but my security and VPN is in place now better even. in reality if the hacker is good enough they can get into anything they want even if your using the best security program around and top rated VPN a hacker will get it in regardless. I know everyone says this but I DO NOT KEEP ANYONES INFORMATION LONGER THEN ONE DAY the system can delete every single day.

Products /

TRENBOLONE ACETATE- 50 ML BOTTLE 107.28 MGs

TESTOSTERONE CYPIONATE-50 ML BOTTLE 210.87 MGs

SHIPPING-
Shipping USA Domestic Only
Shipping Method Discreet
Ships next day after payment
Or same day shipping if payment is received
IF by somehow the delivery does not make it to the destination or if it has been damaged in any way upon delivery then it will be replaced and sent over night using a discreet shipping method.

PAYMENT- BITCOIN ONLY

TESTING INCENTIVE FOR MESO RX FORUM MEMBERS

I will honor $700 store credit for members to test every single batch I ever make and sell on meso rx I will always test my raws before brewing every single batch will be tested and posted and I will test every single batch of finished oil for MG HPLC testing always no matter what and post results this is batch number 1 only and its been tested but from this point on until forever anyone can test batch number 1 or 2 or 3 however many batches I put out and sell and I will always no matter what honor the $700 even if i already posted results that they have been recently tested and someone still wants to test it right after me then you are welcomed to and i will honor the credit or if you just want the $700 in credit then get it tested and post results and email me and I WILL TAKE CARE OF YOU. I tested batch number 1 with JANO results are posted below for test cyp and tren ace but due to people making good batches just to get good test results then selling garbage anyone can test mine at any time.

PRICE FOR PRODUCTS

All of batch number 1 will be sold for $88 a bottle
Tren Acetate 50ml $88
Testosterone Cypionate 50ml $88 prices will stay the same until all sold out of batch number 1....


Monstermann15@protonmail.com

The labels on my 50ml bottles are meant to be small and not fit at all I placed all labels down towards the bottom so that every member can sea the bottles clearly and make sure there are not hairs or floaters which seems to be an issue with some labs I like to hold a flashlight up to the bottle just to inspect them one by one then I place a purple sticker on them so I know that I personally inspected the bottle so all my bottles have purple stickers. I do not put labels on until they go out I like to inspect and see the bottles all over again with a very good flashlight i read a post that people had fine hairs in the solution and the lab said it was due to filtering maybe filtering fibers so since i read that I have been extra safe and paranoid.

I have multiple wallets for crypto everything is moved around properly.

Most of my pictures are older dated from the months following up until my posting here but recent stock and crumpled paper and email and date will be shown below.

I do want to apologize to all the meso rx members I'm not currently involved with anyone so i'm not going to have pictures of a woman's breasts and im not gonna lie and post pictures of breasts that don't belong to me I want to make an attempt so if we have any Bourbon drinkers here I posted what im on now and it is the best bourbon I have personally tried not to sweet like some bourbons can be but not to dry like a rye either its perfect please try if anyone is interested and I posted some picks of tomahawk steak all pictures are below they are a little tricky at cooking but man it came out great.

I'm really going to do my best to communicate with everyone here on the forum and answer all questions but please give me time as i still work a 12 hour shift job. I'm honest I don't burn people and I don't take advantage of people just try to be positive and live right as best as we can thank you all for giving me the time and thank you for taking the time to read my post hope i can be of some assistance on the forum in time to come.

I want to apologize for the basic homebrew lab I don't have an amazing set up with really expensive equipment and great things but keep this in mind I start new every time with a lab as you know i throw everything away so if the members here would prefer a different lab set up then I will make sure its done and that i get things that are more appealing to all the members I was focused on being efficient and things that could easily be tossed away after i was done but i understand standards for brewing and making things for other people need to be set higher i feel my filtering was solid on point and my sterilization methods were perfect but if a better filtering products is prefered or a better lab set up then next time i will make sure it happens for the community.

Posting this at Midnight I hope I did not break a rule it is Friday ....

The most tiring intro I've read.
No commas, no paragraphs.

Not much to say really.
You did not come unprepared.
Let's see.

 

[Monsterman12]

I mean,I get it..you are grateful for meso.
I got tired there,come on.
You could have just showed tits to show your being grateful. We are simple people here.
Me...personally? Pretty flexible too.
I accept other type of pics too..


Thank God!

please let's not talk recipes. It is two simple products.

Do your labels write "Rx" on them?
I am joking.

I dig the no name thing.

50ml. I dig.

didn't you learn from the best brewer ever,too?

Zyzz it bro.



Nice.

Costs add up here I see.
sure thing is that if you walked into my wife's office and asked her to sterilize vials...she would shit on you.
Someone confirm if this is doable?


wife's dry heat 200-300$ used.

When using the autoclaves,I always go way overboard regarding duration and temperature.
Your numbers sound right,but I don't best a testicle. I just overdo it and get done with it.

I think I've seen .10um too.
I use 0.22. Will keep using that.

What OS?

The most tiring intro I've read.
No commas, no paragraphs.

Not much to say really.
You did not come unprepared.
Let's see.

I do apologize about the no paragraphs or commas the entire format shifted when I uploaded it so everything is not in the correct order and it looks like a 2 year old wrote it ...

 

[TrennedOutLunatic]

Trennedoutlunatic agreed 2/20 I abide by his laws ... lol

I think you answered to the wrong question.
However let me tell you that this brew can be done both with less BA/BB.
I will stay with 2/20.

 

[MisterSuperGod]

I don't remember that guy. I have been on and off of here though and didn't really pay closer attention to meso until around 2017.
I think it was already posted but the Souce Ball Busting Crew bosses and capos are @BigBaldBeardGuy @MisterSuperGod @TrennedOutLunatic @MadBret @cochino @Test_Subject @Silentlemon1011 @Villain off the top of my head.
I probably left off a few. I hope I don't get whacked now.

Took me a minute, but now i remember, it's the bulk Tren guy. i still need to go through the intro, which is gonna be rough, but from first glance, he looks like he put some work into getting things prepared.

 

[Monsterman12]

Took me a minute, but now i remember, it's the bulk Tren guy. i still need to go through the intro, which is gonna be rough, but from first glance, he looks like he put some work into getting things prepared.

I apologize the intro looked good but when I uploaded it the entire thing shifted so it looks like an uneducated child wrote it . if I could Redo it I would and make it a lot shorter ...

 

[Silentlemon1011]

I remember you now
Bulk Tren guy.
@Monsterman12

Intro looks decent.
I like the idea of not overextending yourself with trying to brew a fuck tonne of products when you know you dont have time.
50ml... is...ALOT of tren.
I can respect the time and thought you put into this intro
It's nice to see and thank you for your time
Also, good to see the optional Anabolic Lab donation.
Cheers


Here is a question
Stoppers.
Let's say it's a guy like me that would run tren at 25mg ED.
So that's 200 separate injections (Less due to oil loss in the needle tip... but it makes the numbers easy.)

I'm fairly certain that the stoppers will not hold up against 200 separate stab holes, especially if some of these savages that still used 18g Blunts are still kicking around.

I can forsee tonnes of rubber falling into the oil.. maybe even contamination from holes in the stopper by pin 150 lol.

Have you tested this?
What were your results?
This would currently be my only concern, is that new guys might be putting themselves at risk like that.

 

[shackleford]

I'm pretty sure @TrennedOutLunatic already gave you advice for your intro in your other thread, and apparently you too it seriously. You seem open to feedback. Interested to see where this goes.

 

[MaskedLiberty]

I remember you now
Bulk Tren guy.
@Monsterman12

Intro looks decent.
I like the idea of not overextending yourself with trying to brew a fuck tonne of products when you know you dont have time.
50ml... is...ALOT of tren.
I can respect the time and thought you put into this intro
It's nice to see and thank you for your time
Also, good to see the optional Anabolic Lab donation.
Cheers


Here is a question
Stoppers.
Let's say it's a guy like me that would run tren at 25mg ED.
So that's 200 separate injections (Less due to oil loss in the needle tip... but it makes the numbers easy.)

I'm fairly certain that the stoppers will not hold up against 200 separate stab holes, especially if some of these savages that still used 18g Blunts are still kicking around.

I can forsee tonnes of rubber falling into the oil.. maybe even contamination from holes in the stopper by pin 150 lol.

Have you tested this?
What were your results?
This would currently be my only concern, is that new guys might be putting themselves at risk like that.

Ruptured stoppers are easily fixed by asking for sterile vials shipped with the product or buying your own to transfer into.

 

[MadBret]

Looks like a pretty decent start to me. Obviously, a bit of a targeted market but (almost) everyone likes test.

How do the stoppers hold up to that many pokes? That has always been my concern with using jugs. But I think I might remember reading in your introduction that you were using high quality stoppers. Do tell...

Edit: Looks like @Silentlemon1011 beat me to it.

 

[Silentlemon1011]

Ruptured stoppers are easily fixed by asking for sterile vials shipped with the product or buying your own to transfer into.

Agreed
My concerns at that new guys to then scene wont understan that.

Most guys here, would automatically order sterile vials with some filtered blunt tips, knows full well that this will happened.

Some guys wont... and dont understand the limitation of s vial stopper.
I was that guy once... emailing my source (10 years ago lol) about floaters... but I was using 18g and I was a new guy. (He was super nice about it lol)
Hell some guys dont even inspect every vial.. you've seen it before brother.

Once s floater is found on a source.. ONLY THEN does the "OMG ME TOO" movement start.

I'm saying this from Harm reduction perspective and I do definitely have suggestions for how to prevent this once this discussion gets rolling.

 

[Silentlemon1011]

@Monsterman12

I think something as easy as....

1. A message of warning to your clients, like a signature block, warning of the POTENTIAL stopper issues, just so that new users know it for sure.
This can be sent along with the shipping details or the price list,

2. Sell Presterilized 10ml Vials

3. Provide a link with the aforementioned (1) signature block, for where people can purchase sterile vials., may want to mention a filter blunt tip is best for moving oil between vials as well.







Fuck
When people say we are assholes to sources at Meso
It's only because the Sources fire shots first.
We respond in kind.
This guy is showing up humble... did his research, I'm happy to try and help for the time being

 

[Logan44551]

Just realized I couldn't read in dark mode. Couple red flags for me.. first the scrapping of all brew equipment seems very expensive, then your prices are crazy low, and your testing credit is considerably high. The ol if something is to good to be true. I could be way off base.

Who was.the last guy with the 50ml jugs? Test junkie?

 

[lifter6973]

@Monsterman12

I think something as easy as....

1. A message of warning to your clients, like a signature block, warning of the POTENTIAL stopper issues, just so that new users know it for sure.
This can be sent along with the shipping details or the price list,

2. Sell Presterilized 10ml Vials

3. Provide a link with the aforementioned (1) signature block, for where people can purchase sterile vials., may want to mention a filter blunt tip is best for moving oil between vials as well.







Fuck
When people say we are assholes to sources at Meso
It's only because the Sources fire shots first.
We respond in kind.
This guy is showing up humble... did his research, I'm happy to try and help for the time being

I think GPZ sells presterilized vials. I don't remember price but I recall they weren't too expensive plus GPZ is super fast.

 

[lifter6973]

Just realized I couldn't read in dark mode. Couple red flags for me.. first the scrapping of all brew equipment seems very expensive, then your prices are crazy low, and your testing credit is considerably high. The ol if something is to good to be true. I could be way off base.

Who was.the last guy with the 50ml jugs? Test junkie?

King labs from ASF has them. They tried to source here a while back and took a brutal beating before tapping out.

 

[Monsterman12]

Just realized I couldn't read in dark mode. Couple red flags for me.. first the scrapping of all brew equipment seems very expensive, then your prices are crazy low, and your testing credit is considerably high. The ol if something is to good to be true. I could be way off base.

Who was.the last guy with the 50ml jugs? Test junkie?

I remember the days of test junkie and yes it is expensive throwing everything away but I have always did it that way even for personal small amounts that I have made for myself using a 50ml beaker it got tossed I've never been the type of guy to keep hot plates and beakers and extra vials near me or at any location even if it is secure and discrete there is always risk and a chance... it is very expensive throwing everything away I agree and prices will only remain low for this 1st batch then hopefully I can move price up later but not to high obviously..