Monkey King Anabolic

[RYDER80]

Is the site acting fuckedy for anyone else? I can't see new responses and not staying logged in. Then when I try to log in again it says "security error has occurred"
Anyway here's my finished monkey tren a vials. All are stable today. I heard if you overheat oxidation makes it darker?

Could have something to do with the fact that you didnt use any heat. Not saying its bad or anything bc I wouldn't know.. I just have never seen any that shade of yellow.

 

[RYDER80]

Is the site acting fuckedy for anyone else? I can't see new responses and not staying logged in. Then when I try to log in again it says "security error has occurred"
Anyway here's my finished monkey tren a vials. All are stable today. I heard if you overheat oxidation makes it darker?

Googling pics of it, there are lighter pics like the color you have... Just never seen that light personally.

 

[TideGear]

Googling pics of it, there are lighter pics like the color you have... Just never seen that light personally.

I had some tren ace from zphc that looked a lot like that about a year ago. It was good

 

[burkeen]

Looks good, Remember the darker the tren is the more heat is used = the more you have destoyed the hormone

It's on the outside yeah looks shit but I broke my other beaker,, your right and we all need to be extra careful. I just filtered the first vial and it's clear af.

 

[Heavy Iron]

Looks good, Remember the darker the tren is the more heat is used = the more you have destoyed the hormone

I thought you need a SIGNIFICANT amount of heat to damage hormone.

 

[Holidaypay]

I thought you need a SIGNIFICANT amount of heat to damage hormone.

Yeh tren is a little more sensitive but u can heat it on low multiple times to make it darker without bringing it to a dangerous temp I have done it when I had a little moisture in it an it got dark but still was strong af

 

[Heavy Iron]

Yeh tren is a little more sensitive but u can heat it on low multiple times to make it darker without bringing it to a dangerous temp I have done it when I had a little moisture in it an it got dark but still was strong af

I heat my carrier up. When it's warm enough to pick up and not burn my hand I add the compound. My Tren came out dark

 

[Cyrix]

I heat my carrier up. When it's warm enough to pick up and not burn my hand I add the compound. My Tren came out dark

I've made tren that is almost clear in EO and also has been piss colored. I've gotten the same results/sides regardless of what color it comes out.

 

[master.on]

I am not using the vials because I am going to remain in China so I can personally oversee everything. I will brew the finished products, I will manage the raws warehouse, I will press the tablets. If I go back to live in America so I can open a domestic shop I won’t be able to have full control over the operation. And if you’re not in full control then there are the possibilities of mess ups. Also, within the next two weeks I’ll be going to a raws factory with a biochemical engineer who will be working for me to take a class on synthesizing various anabolic steroidal compounds. My end goal is to own a legitimate raws factory(have an actual pharmaceutical license). If I can achieve that I will be the first raws source to offer factory prices to the general public. That would benefit everyone in the steroid community because I believe it will allow sources to be more competitive with their prices

We appreciate your commitment to enterprise but making raws needs a million dollar investment

Chemists are paid six-figure salaries, even in China
you'll need lab equipment that gets pricey for larger scale labs
add sourcing and buying the chemical reagents.

 

[TideGear]

I heat my carrier up. When it's warm enough to pick up and not burn my hand I add the compound. My Tren came out dark

I've noticed that it gets darker over time. I brewed some quite a few months ago that was very light and now it's pretty dark.

 

[MonkeyKingAnabolic]

We appreciate your commitment to enterprise but making raws needs a million dollar investment

Chemists are paid six-figure salaries, even in China
you'll need lab equipment that gets pricey for larger scale labs
add sourcing and buying the chemical reagents.

Actually the average salary every month for a biochemical engineer in China is 1,500-3,000 per month(checked various job listings boards on the Chinese Internet). And the equipment to start a small raws factory(making 50kg batches at a time) would only cost 30-50,000$ assuming you rent your space you manufacture/synthesize in. The main equipment used in synthesis: 200 liter glass pharmaceutical reactor only costs $10,000, each 50L rotary evaporator costs $2,300(need 4 of them total $9,200), heating and cooling option for your chemical reactor costs $4,500, 50L filters(used to filter the solvents/ acids off the raws. Need 4 total $2,200*) costs $550, pharmaceutical API(raws) drying machine costs $1,200(need two to dry 50kg total $2,400), leaves you at a grand total of $29,500 for the main equipment used to synthesis your raws. Then you will need flow hoods, hot plates, beakers and other various Laboratory supplies and the rent for warehouse to house the Laboratory(gonna say another $10,000 for this). And then you need to buy the starting materials used to manufacture the raws. Each kilogram of test e costs $15 worth of raw materials to manufacture. So let’s say 500kg worth of various testosterones starting materials(7,500$) this leaves you with a whopping grand total of $47,000 to start a small raws factory capable of producing 50kg batches of each raw manufactured and the starting materials to produce 500kg of various testosterones. But you are absolutely correct, if I wanted to go open a raws factory that had 10 5000L chemical reactors capable of producing metric tons of raws with every batch made it would cost millions of dollars to open. But to open a small raws factory it’s actually not that expensive

 

[Savagesteve]

Actually the average salary every month for a biochemical engineer in China is 1,500-3,000 per month(checked various job listings boards on the Chinese Internet). And the equipment to start a small raws factory(making 50kg batches at a time) would only cost 30-50,000$ assuming you rent your space you manufacture/synthesize in. The main equipment used in synthesis: 200 liter glass pharmaceutical reactor only costs $10,000, each 50L rotary evaporator costs $2,300(need 4 of them total $9,200), heating and cooling option for your chemical reactor costs $4,500, 50L filters(used to filter the solvents/ acids off the raws. Need 4 total $2,200*) costs $550, pharmaceutical API(raws) drying machine costs $1,200(need two to dry 50kg total $2,400), leaves you at a grand total of $29,500 for the main equipment used to synthesis your raws. Then you will need flow hoods, hot plates, beakers and other various Laboratory supplies and the rent for warehouse to house the Laboratory(gonna say another $10,000 for this). And then you need to buy the starting materials used to manufacture the raws. Each kilogram of test e costs $15 worth of raw materials to manufacture. So let’s say 500kg worth of various testosterones starting materials(7,500$) this leaves you with a whopping grand total of $47,000 to start a small raws factory capable of producing 50kg batches of each raw manufactured and the starting materials to produce 500kg of various testosterones. But you are absolutely correct, if I wanted to go open a raws factory that had 10 5000L chemical reactors capable of producing metric tons of raws with every batch made it would cost millions of dollars to open. But to open a small raws factory it’s actually not that expensive

Don’t waste your time replying to @master.on because he doesn’t know shit about anything, yet claims to.

 

[master.on]

Actually the average salary every month for a biochemical engineer in China is 1,500-3,000 per month(checked various job listings boards on the Chinese Internet). And the equipment to start a small raws factory(making 50kg batches at a time) would only cost 30-50,000$ assuming you rent your space you manufacture/synthesize in. The main equipment used in synthesis: 200 liter glass pharmaceutical reactor only costs $10,000, each 50L rotary evaporator costs $2,300(need 4 of them total $9,200), heating and cooling option for your chemical reactor costs $4,500, 50L filters(used to filter the solvents/ acids off the raws. Need 4 total $2,200*) costs $550, pharmaceutical API(raws) drying machine costs $1,200(need two to dry 50kg total $2,400), leaves you at a grand total of $29,500 for the main equipment used to synthesis your raws. Then you will need flow hoods, hot plates, beakers and other various Laboratory supplies and the rent for warehouse to house the Laboratory(gonna say another $10,000 for this). And then you need to buy the starting materials used to manufacture the raws. Each kilogram of test e costs $15 worth of raw materials to manufacture. So let’s say 500kg worth of various testosterones starting materials(7,500$) this leaves you with a whopping grand total of $47,000 to start a small raws factory capable of producing 50kg batches of each raw manufactured and the starting materials to produce 500kg of various testosterones. But you are absolutely correct, if I wanted to go open a raws factory that had 10 5000L chemical reactors capable of producing metric tons of raws with every batch made it would cost millions of dollars to open. But to open a small raws factory it’s actually not that expensive

The only thing is that not anyone with a chemistry / biochemistry / chemical synthesis degree will do,
you need someone who already has experience in synthesizing steroids, and they're in such high demand that they're paid 6-figures.

IMO start by being THE BEST reseller.
Start by remailing raws to top accredited labs like Simec or Lab4tox, and get a money back guarantee if raws come lower than 95% pure.

Get lab deals so they can begin testing other steroids and esters,
the first new test will be a bit expensive as they need to buy the new reference standards, and do trial runs, but it gets cheaper for the next tests.

After some tests, and rejecting some batches due to low quality, you can easily become THE wholesaler
so sources begin buying from you wholesale because of your outstanding quality.

After a while you can start doing HPLC testing yourself (hiring HPLC technicians)
this thread can get you started on HPLC testing
Details on how to start your own testing lab and how much to invest

 

[Heavy Iron]

After a while you can start doing HPLC testing yourself

Do it man. I believe in you.

 

[Steve84]

The only thing is that not anyone with a chemistry / biochemistry / chemical synthesis degree will do,
you need someone who already has experience in synthesizing steroids, and they're in such high demand that they're paid 6-figures.

IMO start by being THE BEST reseller.
Start by remailing raws to top accredited labs like Simec or Lab4tox, and get a money back guarantee if raws come lower than 95% pure.

Get lab deals so they can begin testing other steroids and esters,
the first new test will be a bit expensive as they need to buy the new reference standards, and do trial runs, but it gets cheaper for the next tests.

After some tests, and rejecting some batches due to low quality, you can easily become THE wholesaler
so sources begin buying from you wholesale because of your outstanding quality.

After a while you can start doing HPLC testing yourself (hiring HPLC technicians)
this thread can get you started on HPLC testing
Details on how to start your own testing lab and how much to invest

Love it, you are soo stupid and alone in your own world you started creating your own threads and tagging them in other threads.

Whatever you do Monkey King start by putting this moron on ignore and keep it that way.

 

[RYDER80]

I thought you need a SIGNIFICANT amount of heat to damage hormone.

I believe you are right about that. All mine has come out dark and I only heat up to around 130-140 at most, and heat my carrier up to around 110-120 before adding raws. All my shit has been strong as shit. Additionally, anytime in the past I've bought finished oils, the tren has been a darker color. I'm wondering if there is actually different variations in the tren powder or maybe brewing over the typical 100mg/ml that causes the color differences, or if is in fact the heat that causes it. I usually brew at around 120 mg/ml. Next time I may try with little to no heat & see if it comes out a lighter color.

 

[master.on]

Don’t waste your time replying to @master.on because he doesn’t know shit about anything, yet claims to.

Love it, you are soo stupid and alone in your own world you started creating your own threads and tagging them in other threads.

Whatever you do Monkey King start by putting this moron on ignore and keep it that way.

Now you sound like high school drama queens getting jealous because someone else is becoming more popular.
Man up men!

 

[Robfromga]

Now you sound like high school drama queens getting jealous because someone else is becoming more popular.
Man up men!

No.
That's not the case
Go reset your hard drive .

 

[Savagesteve]

Now you sound like high school drama queens getting jealous because someone else is becoming more popular.
Man up men!

Jealous because you can copy and paste from the most popular search engines? You’re like An itching asshole when you didn’t get cleaned up good enough, no one wants that

 

[T-Bagger]

Jealous because you can copy and paste from the most popular search engines? You’re like An itching asshole when you didn’t get cleaned up good enough, no one wants that

I HATE swamp butt!!!!