Qingdao Sigma Chemical Co., Ltd (International, US, EU, Canada and Australia domestic

[Date_Mike]

You can buy already filtered oil online that works well

I’m the one that told you that. That also doesn’t address my point of- adding only oil to a premade solution is going to dilute your BA and BB by 50%. You run the risk of bacteria growth and substance crashing depending on initial recipe. Which as far as I know is not public from QSC. If they use 2% BA you may be fine. 1% BA diluted to 0.5% is asking for an infection.

 

[Mrgiuoco]

I’m the one that told you that. That also doesn’t address my point of- adding only oil to a premade solution is going to dilute your BA and BB by 50%. You run the risk of bacteria growth and substance crashing depending on initial recipe. Which as far as I know is not public from QSC. If they use 2% BA you may be fine. 1% BA diluted to 0.5% is asking for an infection.

Yea my bad bro

 

[gotmyles]

hey guys do we email the same email for identifying the items that came

 

[jJjburton]

hey guys do we email the same email for identifying the items that came

Yes

 

[Nilatac]

hey guys do we email the same email for identifying the items that came

 

[ThyroidMan2020]

The melanotan 2 you guys sell:

I've seen it been marketed as "melanotan 2", or "melanotan 2 acetate".

Is there a difference or are they all technically "acetate" but just abbreviated to "melanotan 2"?

 

[razter]

Does anyone have the lab test for Thymosin Alpha 1?

 

[razter]

I have a good delay on emails due to a sudden increase in the flow of emails, please be patient and forgiving, I try my best to catch up.

Thank you for letting us know. Hopefully your assistant can do the vial identification for us on the orders we've received.

 

[LGOP528]

I’m the one that told you that. That also doesn’t address my point of- adding only oil to a premade solution is going to dilute your BA and BB by 50%. You run the risk of bacteria growth and substance crashing depending on initial recipe. Which as far as I know is not public from QSC. If they use 2% BA you may be fine. 1% BA diluted to 0.5% is asking for an infection.

I have mixed QSC primo to make 100 mg/mL with no issues. I also have brewed primo @100mg/mL with 1% BA and 10% BB. When considering standard concentration solutions, I think the higher BB is to make sure it doesn’t come out of solution because of possible temperature changes during shipping. If you are brewing or mixing at your house, it isn’t a big deal. If you are worried about BA, just add 0.5%.

 

[gotmyles]

i just want to repeat this in less words because its amazing: my international order came in only 2 weeks this time

usually 3 weeks, holy shit

 

[y777]

i just want to repeat this in less words because its amazing: my international order came in only 2 weeks this time

usually 3 weeks, holy shit

tracking my own. Handed over to USPS… if usps schedule is correct it’s also gonna be 2 weeks

 

[L_3551]

@qsc updated email? I sent an email to place order.

View attachment 263484

Yes. It says that in the screenshot you posted.

 

[Date_Mike]

I have mixed QSC primo to make 100 mg/mL with no issues. I also have brewed primo @100mg/mL with 1% BA and 10% BB. When considering standard concentration solutions, I think the higher BB is to make sure it doesn’t come out of solution because of possible temperature changes during shipping. If you are brewing or mixing at your house, it isn’t a big deal. If you are worried about BA, just add 0.5%.

At that point you’re getting to where you might as well homebrew…

 

[y777]

I’m the one that told you that. That also doesn’t address my point of- adding only oil to a premade solution is going to dilute your BA and BB by 50%. You run the risk of bacteria growth and substance crashing depending on initial recipe. Which as far as I know is not public from QSC. If they use 2% BA you may be fine. 1% BA diluted to 0.5% is asking for an infection.

so best bet is to just dilute before pin ?
I saw USP sterile vials of oils on Amazon … just draw from those first then draw the gear ?


I went even more ghetto than that, usually I draw test-p (100mg/ml) then winny oil but I tried to alternate pin days so on win days I will admit that I drew to some BAC water first then the win oil lol.

side question. Anyone use the @Qingdao Sigma Chemicals win oil ? How do you get rid of the crystals ?

I’ve heard references to folks heating their vials just to make thicker oils pin smoother , does it work w winstrol or do I need more heat ? What’s the quick and dirty way to do this ? nuke some water in the mixrowave then drop the vial for a few minutes ? If that works , how long are the crystals dissolved for ? I work out first thing in the AM so usually pre draw my oils the night before and jab as soon as I wake up -suppose I’ll have to heat my vials in the kitchen and run the risk of being busted by the fam lol

 

[Date_Mike]

No,

so best bet is to just dilute before pin ?
I saw USP sterile vials of oils on Amazon … just draw from those first then draw the gear ?


I went even more ghetto than that, usually I draw test-p (100mg/ml) then winny oil but I tried to alternate pin days so on win days I will admit that I drew to some BAC water first then the win oil lol.

side question. Anyone use the @Qingdao Sigma Chemicals win oil ? How do you get rid of the crystals ?

I’ve heard references to folks heating their vials just to make thicker oils pin smoother , does it work w winstrol or do I need more heat ? What’s the quick and dirty way to do this ? nuke some water in the mixrowave then drop the vial for a few minutes ? If that works , how long are the crystals dissolved for ? I work out first thing in the AM so usually pre draw my oils the night before and jab as soon as I wake up -suppose I’ll have to heat my vials in the kitchen and run the risk of being busted by the fam lol

your best bet is to not dilute premade solutions with unknown variables. What you’re saying, it sounds like you’re just adding volume for not much reason. I honestly do not know the answer or mechanics to that.

I’m a careful person, I want to know exactly what I’m injecting into my body. Even if the solution is holding before injection, low BB content can cause it to crash in the muscle post injection causing PIP.

 

[y777]

No,

your best bet is to not dilute premade solutions with unknown variables.

I’m a careful person, I want to know exactly what I’m injecting into my body. Even if the solution is holding before injection, low BB content can cause it to crash in the muscle post injection causing PIP.

Fair enough. winstrol is unstable enough as it is .

I’ve managed to avoid the PIP by going at least 1.5 inches deep into VG muscle. No delts unless it’s 0.2 ml (5mg) micro dose of win. That plus massage gun right after

I do need to find a way to dissolve the crystals that form in the vial , i don’t plan on switching to 21 or 18g needles to pin

 

[LGOP528]

No,

your best bet is to not dilute premade solutions with unknown variables. What you’re saying, it sounds like you’re just adding volume for not much reason. I honestly do not know the answer or mechanics to that.

I’m a careful person, I want to know exactly what I’m injecting into my body. Even if the solution is holding before injection, low BB content can cause it to crash in the muscle post injection causing PIP.

Why would low BB cause it to crash? It is going into a hotter climate and was in solution before injection. I have heard that BB speeds up the release from the ester I don’t know how true this is. My understanding is that high BB causes PIP. This is why higher concentrations are known to be more prone to PIP.

 

[6tren]

Is it possible to make your injectables without MCT and use a different carrier oil?
The PIP is pretty bad when injecting high volume.

 

[narta]

Is it possible to make your injectables without MCT and use a different carrier oil?
The PIP is pretty bad when injecting high volume.

I suggest unrefined fracking oil

 

[gobig2]

Is anyone getting their emails answered? This is the longest Ive gone ever with them. Put it in Monday I believe. Tracy hmu @Qingdao Sigma Chemicals