Qingdao Sigma Chemical Co., Ltd (International, US, EU, Canada and Australia domestic

[Juicedhead]

EO is a solvent…it’s not an oil. Apparently it’s very toxic. Shoot before I knew it was bad I used some in a brew and that shit literally melts plastic, so that alone confirms to me that it’s bad for you.

it melts plastic? whaaaat? I love EO been using it for years, have noticed no problems..

 

[y777]

Wait, you’re running 560mg of test prop a week and your levels are only 420 ng/dl??

Bro that means the test prop is bunk as fuck

Peak plasma for test prop is at 8-9 hours. Half life is under 20 hours so my guess is that his bloods are reflecting that at +17 hours

It also depends on his metabolism.

 

[Canuck83]

Peak plasma for test prop is at 8-9 hours. Half life is under 20 hours so my guess is that his bloods are reflecting that at +17 hours

It also depends on his metabolism.

If you’re injecting at the same time ED I would think levels should be higher

 

[Juicedhead]

If you’re injecting at the same time ED I would think levels should be higher

agreed, no way it would be that low 17 hrs after shooting. it should be very high on 560mg a week with daily injections imo

 

[blinz77]

agreed, no way it would be that low 17 hrs after shooting. it should be very high on 560mg a week with daily injections imo

Steroid plotter for 73 mg prop a day (497/mg wk). trough is 2/3rds peak. extrapolating that, his peak would be like sub ~1000. there could be all sorts of confounding variables, but for me, not a glowing report of this prop

 

[Lpd22]

Peak plasma for test prop is at 8-9 hours. Half life is under 20 hours so my guess is that his bloods are reflecting that at +17 hours

It also depends on his metabolism.

The half life for test prop longer than 8 hours lol. At 560mg a week you should have levels above 1500. If it was legit I’d wouldn’t be surprised to see 2000 even

 

[Canuck83]

pulled some bloods on QSC test prop @80mg a day - awesome stuff btw. Bloods were pulled about 17 hours after last injection and I was still at about 420 ng/dL. Did not realize test prop stuff around that long lol. Quality stuff QSC!

What’s your caps look like ? And was this kit from us warehouse ?

 

[Qingdao Sigma Chemicals]

I am off today guys, patience on emails

 

[Laxbro88]

Did my first brew ever yest. TE. So easy. Zero reason to buy oils for these basic compounds that are easy to brew. And for supplies all I bought were BA, BB, and a small beaker. Used Costco MCT plus stove top heat. Suppose I may need a real hot plate or stirrer but hoping to keep hardware to a minimum around my family lol

Haha man I use the same coffee mug warmer that I use for heating my vials up before injecting. A hot plate with more than 3 temperatures would probably be an upgrade for sure though.

 

[HB_22]

Retatrutide 5mg and 10mg kits are available and pending testing.

Hell yea, I cant wait!

 

[y777]

dude nice! Was the MCT usp grade? thats important i guess? Also im assuming it wasent sterile oil? I will be brewing my staples, test c, npp, primo, oral tren. cant wait bro the amount of money saved alone is awsome

Not USP grade. Just the stuff I got on sale at Costco recently.

https://www.costcobusinessdelivery.com/sports-research-mct-oil%2c-unflavored%2c-20-fl-oz%2c-2-ct.product.100345455.html

Tbh, I’d be happy to buy some USP grade that’s in a big vial as I only plan to brew one or two vials at a time for now. This way I can just store it all in my home office alongside the solvents. Less conspicuous that’s for sure.

 

[Deskoze38192]

Tbh, I’d be happy to buy some USP grade that’s in a big vial as I only plan to brew one or two vials at a time for now. This way I can just store it all in my home office alongside the solvents. Less conspicuous that’s for sure.

Buy MCT OIL 60/40, CAPRYLIC-C8, CAPRIC-C10, Pharmaceutical Grade

MCT 60/40 Oil containing high levels of medium chain triglycerides: Caprylic (C8) and Capric (C10, Pharmaceutical Grade

www.medical-and-lab-supplies.com

 

[petefox]

If it was very toxic pharma companies wouldn't use it as a carrier for their testosterone or used for progesterone.
Point me one study where the toxicity was proved. I wait.

Just found this on Google, don't remember if I've ever used anything with it but I've heard stories.
Ethyl Oleate

 

[Nilatac]

Just found this on Google, don't remember if I've ever used anything with it but I've heard stories.
Ethyl Oleate

You can have a allergic reaction to mct or any other oil for that matter.
I asked the guy if there is any study that has proved his toxicity as he claims it is. But there are only stories and not backed up by something.
I bet that we aren't any smarter than pharma companies that use eo in their products.

 

[Heavy Iron]

Buy MCT OIL 60/40, CAPRYLIC-C8, CAPRIC-C10, Pharmaceutical Grade

MCT 60/40 Oil containing high levels of medium chain triglycerides: Caprylic (C8) and Capric (C10, Pharmaceutical Grade

www.medical-and-lab-supplies.com

This is what I use. I used to use NOW sports which was fine but damn the price of MCT has gone up the last few years. But this stuff is great.

 

[Deskoze38192]

This is what I use. I used to use NOW sports which was fine but damn the price of MCT has gone up the last few years. But this stuff is great.

Yeah good stuff and good price for sure.
I like the 100 ml comes in a vial

 

[connoristiny]

any tips to prevent rubber pieces from the stopper dislodging and falling into the gear?

how do more people not complain about this, or y'all just don't care? This happens to every vial for me, which is a problem since I have like 30 vials left. I tried everything from pinning different spots in the vial to using a 27g needle to draw. Not a fan of wasting gear or spending extra money/time flitering.

 

[DECLAN]

how do more people not complain about this, or y'all just don't care? This happens to every vial for me, which is a problem since I have like 30 vials left. I tried everything from pinning different spots in the vial to using a 27g needle to draw. Not a fan of wasting gear or spending extra money/time flitering.

This issue has been beaten to a pulp. You are just one lazy mofo who doesn't research and complain about everything. Jesus, all your posts is about an issue about something or you need help.

If your cheap ass can't spend money to be extra safe like the rest, stop doing roids and start learning how to knit.

 

[tenba12]

how do more people not complain about this, or y'all just don't care? This happens to every vial for me, which is a problem since I have like 30 vials left. I tried everything from pinning different spots in the vial to using a 27g needle to draw. Not a fan of wasting gear or spending extra money/time flitering.

They suck. I wish they'd spend $2 more per kit on some decent fucking caps. But until that happens, I use "BD 305125" 25g needles to draw (and longer 27g to inject). I do EOD injections so I'm probably getting 20-30 stabs into each vial, depending. And I haven't had any "chunks" issues.

I'm careful to stab the rubber in a spiral pattern, starting around the edge and slowly rotating inwards, making sure to do a different spot each day. I also make sure I go straight in gently and dont wiggle things around too much.

Yes, the caps suck. Yes, I wish they'd get better ones. I especially hate tearing off the metal cover! But with the BD PrecisionGlide 25-27g needles I'm not seeing chunks taken out of the rubber even after 20 stabs (careful, gentle).

If your vials have more issues than mine, maybe try buying higher quality pre-sterilized vials 10ml Amber Sealed Sterile Glass Vial, Qty. 1 and just using a single 10cc syringe to transfer from the QSC vial to this sterile vial. Super simple cuz you dont need to sterilize anything yourself and its shipped with a pretty strong vacuum so it mostly sucks the oil out of the syringe.

If you want to go super high quality you can get silicone stoppers and DIY sterilize and cap some vials with the silicone stoppers. Those would last tons and tons and tons of stabs before noticing anything happen, and happily accept larger gauge needles for drawing.

 

[razter]

how do more people not complain about this, or y'all just don't care? This happens to every vial for me, which is a problem since I have like 30 vials left. I tried everything from pinning different spots in the vial to using a 27g needle to draw. Not a fan of wasting gear or spending extra money/time flitering.

Why don't you just buy a vial adapter?