Qingdao Sigma Chemical Co., Ltd (International, US, EU, Canada and Australia domestic

[Qingdao Sigma Chemicals]

Is the glutathione reduced 600mg in a 4ml peptide vial? Or are these in 10ml vials?

I think 4-5ml vials. They are bigger than regular peptide vials.

 

[RiceNKimchi]

Shoot your cheap Chinese shit and stfu. Plenty of others 3x the price with better customer service if that route is wanted

 

[Mongo966]

Goddamn, if this is what Americans have to offer, whining Canadians are way more tolerable. Last week it was a paranoid murican, now this lol.

Ugh. Man, don't bring the attention back onto us Canadians. This guy basically saved us from the onslaught.

 

[4Drago]

This is a question I have never seen answered in this thread and I have followed this thread from the very beginning......it is like a War and Peace novel in length ...how many cc's are in each vial in his 10 vial kits, specifically of Test Cyp 250, Primobolan Enan 200 and Masteron Enan 200 ? Like 9.0.... 9.3.... 9.5 .....9.8 .....9.9 ...
.10.o.. ...10.1.... 10.3.... ? Thank you. By the way, when figuring out how many cc's are in each vial, be aware there is .10 cc's of waste in 3cc syringes and .07 cc's of waste in 1 ml syringes, so you must account for the waste (ie unusable oil trapped in the head of the barrel) in your measurements.

What a doof. 10cc per vial bud. Move on its gonna be ok.

 

[181]

I just had a crazy thought. The rep for QSC is Chinese...I think? Really wonder how they think us westerners are. I mean after reading all these posts they must think we're a bunch of geniuses of something.

This forum definitely does not show our best and brightest. lol

 

[thisismyusername4567]

Nahh you Canadians cry about everything. If it's not the tracking info you're crying about it's the delivery time. If it's not that it's the identification of your items. If it's not that, you're going into detail about what was sent to you and how it was packaged. Canadians have been such a risk lately.
I'd cut ties all together. It would probably be better for business. Less bullshit emails. Who knows

Typical American crying about Canadians crying

 

[Deskoze38192]

Typical American crying about Canadians crying

Typical Canadian crying about Americans crying about Canadians crying

 

[ovrdooze]

is bac water available in EU warehouse?

 

[vizzorz]

Will there be a aus hgh restock?

 

[CFH016]

Typical Canadian crying about Americans crying about Canadians crying

Quit fighting you guys are making me cry :'(

 

[gburdell]

Insulin syringes have slightly less waste - .07 cc's of waste - than a regular 3 cc syringe - .10cc's of waste

Draw in a little bit of air into your syringe and use that to push the last of your oil through the hub and needle. Since you're injecting IM, or maybe SC, it won't matter if you over do it and push in a little air.

 

[dumbbellpress]

Draw in a little bit of air into your syringe and use that to push the last of your oil through the hub and needle. Since you're injecting IM, or maybe SC, it won't matter if you over do it and push in a little air.

I don't understand what you mean totally. But are you saying there is a way to get that .o7ml or .10ml of waste oil trapped in the syringe out so that there is effectively zero waste oil left in the syringe after you inject subq or im ? If so, that is wild, I never knew you could use up the waste oil. I am gonna Google it and youtube it and see if what I think you mean - "draw in a little bit of air into your syringe" is what you actually mean...like I think you are maybe talking about...if I wanna inject 1.1 cc's...then I could pull up to where it reads 1.0 on the barrel...but since we know there is .10 ml of waste in a 3cc syringe, then that 1.0 is actually 1.1 cc's if we could get the .10 ml of waste out of the syringe, right ? I think this is what you are referencing ? And you are saying the way you can get the .10ml of waste out of the syringe....is to pull in some air into the syringe - After- you have pulled out 1.o ml reading on the barrel ? Is this what you mean ? Anyways, I appreciate it, and I am gonna search for this technique. I don't think anyone on meso or outlawmuscle or anabolicboard knows of this technique, as any board I am associated with....it has always been assumed there is no way to get that waste oil out of there. Thanks !

 

[CFH016]

I don't understand what you mean totally. But are you saying there is a way to get that .o7ml or .10ml of waste oil trapped in the syringe out so that there is effectively zero waste oil left in the syringe after you inject subq or im ? If so, that is wild, I never knew you could use up the waste oil. I am gonna Google it and youtube it and see if what I think you mean - "draw in a little bit of air into your syringe" is what you actually mean...like I think you are maybe talking about...if I wanna inject 1.1 cc's...then I could pull up to where it reads 1.0 on the barrel...but since we know there is .10 ml of waste in a 3cc syringe, then that 1.0 is actually 1.1 cc's if we could get the .10 ml of waste out of the syringe, right ? I think this is what you are referencing ? And you are saying the way you can get the .10ml of waste out of the syringe....is to pull in some air into the syringe - After- you have pulled out 1.o ml reading on the barrel ? Is this what you mean ? Anyways, I appreciate it, and I am gonna search for this technique. I don't think anyone on meso or outlawmuscle or anabolicboard knows of this technique, as any board I am associated with....it has always been assumed there is no way to get that waste oil out of there. Thanks !

Fuck that was hard to read... let me show you what I do.


Say I'm filling 0.3ml just like this. From the 0 to the needle is all air. I'll flip it over, give it some flicks until the air is at the rubber rather than the needle, then it's an air bubble pushing the solution through.

 

[dumbbellpress]

Fuck that was hard to read... let me show you what I do.

View attachment 267155
Say I'm filling 0.3ml just like this. From the 0 to the needle is all air. I'll flip it over, give it some flicks until the air is at the rubber rather than the needle, then it's an air bubble pushing the solution through.
View attachment 267156

OK, but the air between the black rubber and the oil at the .30ml line in your 2nd picture....as soon as you press down on the plunger, isn't the black rubber immediately gonna dissipate that air space and go straight down flush on the oil at the .30ml level ? Or will that small pocket of air be maintained as you press down on the plunger ? Seems like a silly question, but I honestly dunno if the pocket of air will be maintained as you press down, or if the pocket of air will immediately dissipate and the black rubber will go straight up immediately flush against the oil at the .30ml level ?

 

[dumbbellpress]

Fuck that was hard to read... let me show you what I do.

View attachment 267155
Say I'm filling 0.3ml just like this. From the 0 to the needle is all air. I'll flip it over, give it some flicks until the air is at the rubber rather than the needle, then it's an air bubble pushing the solution through.
View attachment 267156

Matter of fact, I need to inject tomorrow night, but I am curious about your technique, so I am gonna inject tonight and see if I can replicate the technique I think you are showing. Thanks for the help.

 

[MaxGainz]

@Qingdao Sigma Chemicals is Emeramide available?

Aha, a fellow Peater

 

[CFH016]

OK, but the air between the black rubber and the oil at the .30ml line in your 2nd picture....as soon as you press down on the plunger, isn't the black rubber immediately gonna dissipate that air space and go straight down flush on the oil at the .30ml level ? Or will that small pocket of air be maintained as you press down on the plunger ? Seems like a silly question, but I honestly dunno if the pocket of air will be maintained as you press down, or if the pocket of air will immediately dissipate and the black rubber will go straight up immediately flush against the oil at the .30ml level ?

I've never had it push the air past the liquid, especially in oil. It just comes out too slow. All you will see is the air compress a little bit depending on the viscosity of your solution. I still try to push slow when I'm injecting HCG or anything else with water. I've never once had it fail with that technique. Either I miss out on 0.01ml or I get a tiny bit of air in me.

 

[mchammertime]

A little air is good, everyone needs some air in their skin

 

[FortyFiveLbs]

Well, US population is almost 10x Canada's, it's only natural for the disparity to be wide. Plus, look at the sizes of the populace, they need more fat loss drugs than we do lol.

So, I understand the vendor's reluctance to expand market in the north when the US warehouse still runs out of stock sometimes. Feed your main source of income first before venturing further.

Not to mention, our UGL’s here have already sunk their roots into the ground of the market. Think of how many plug blocks are over on CJM talking shit about any other source besides the source they’re loyal too. A lot of guys would most likely just keep paying the money even if they had the option for a domestic source that’s more cost effective.

 

[4Drago]

Matter of fact, I need to inject tomorrow night, but I am curious about your technique, so I am gonna inject tonight and see if I can replicate the technique I think you are showing. Thanks for the help.

You have issues bud...wow!