Qingdao Sigma Chemical Co., Ltd (International, US, EU, Canada and Australia domestic

[dumbbellpress]

And I will repaet what I said Rido...""but in the past, several years ago when I used them, I have used BD 25 gauge 1 inch 1 cc insulin syringes with necks / ends that looked like a normal 3 cc syringe on the end, like these"

If those are BD's then that is fine. But I have never seen or used BD insulin syringes with ends like those. Look inside the box and see if there are instructions for how much waste those have...whether they have .07 cc's, .10 cc's or no waste at all.

 

[expylon]

Ok well, i once got a box that were like this.

That has a "neck" the orange part that indeed made you waste a considerable part of liquid.

But the one i posted before is ridiculously minimum waste.

I didnt know you call them BD. Is that a brand name or acronym?

 

[CFH016]

The difference is a syringe with a removable needle and a syringe with a needle that cannot be removed. There is more waste in the syringe with the slip on/luer lock needles as opposed to the "insulin syringes".

 

[blinz77]

so, let’s do the maths here. a vial of test e us domestic is $9.5. I’ll round up to $11 for shipping btc fees etc. if you’re doing a cc/ml per injection, then it’s $1.1 a pin. say you’re losing a tenth of a pin every time. two pins a week for twenty weeks. $4.4 loss over a cycle of 500 mg/wk. .04% of initial expense.

all that to say, who gives a fuck

 

[y777]

so, let’s do the maths here. a vial of test e us domestic is $9.5. I’ll round up to $11 for shipping btc fees etc. if you’re doing a cc/ml per injection, then it’s $1.1 a pin. say you’re losing a tenth of a pin every time. two pins a week for twenty weeks. $4.4 loss over a cycle of 500 mg/wk. .04% of initial expense.

all that to say, who gives a fuck

Semi weekly primo injections it is, then lol. Was just getting used to daily pining

 

[Benf15harp]

Is it possible to request a preferred shipping company like DHL etc in Spain?
GLS is always problematic for me.

 

[boxer15]

Anyone use their NAD+ raw powders? Heard some people say NAD+ is not stable at room temperature but can't find evidence for this. Or is that only once mixed into solution.

 

[Deleted member 127229]

Thank you for outlining this for us. Very insightful. This explains why the 1cc Test-c vials I’ve gotten at pharmacy are overdosed (1.2mL, IIRC).

Do slin pins have comparable waste or is it significantly less?

What do you think of the vial adapters ? Would they minimize this waste ?

Bravo 24 Vial Access Spike

Bravo 24 Vial Access Spike is ON SALE NOW. Buy discounted medical equipment and supplies at Vitality Medical. Fast shipping and low prices.

www.vitalitymedical.com

For folks who micro dose daily , I suppose the best thing would then be to load their oils into sterile self injector cartridges (3-4 mL) and then just worry about replacing needle tips when using the self injector pen

Using a syringe daily is not inconvenient or difficult. Why do people continuously try to reinvent the wheel?

 

[clearheaded]

I am not sure if its been actually calculated it HOWEVER, remember u are also injecting the "invisible" oil as the barrel of syringe is also full before u infect and not full of air. so ur dosage isn't as far off but yes there is some tiny amount of waste, but dosage isn't as far off as the lost oil.. maybe this is obvious and not what ur talking about.

also NO DO NOT purposely inject AIR to save 30 cents of gear esp if injecting IM.

 

[Iron_Yuppie]

also NO DO NOT purposely inject AIR to save 30 cents of gear esp if injecting IM.

Air gets in. Do not be afraid of it.

 

[blinz77]

Air gets in. Do not be afraid of it.

Exactly, the amount of air you’d have inject directly into a vein to get an embolism is honestly a lot. I don’t recommend it, but I’ve accidentally pinned a cc of Air half awake. feels weird, but probably the least of my concerns

 

[Justaguy99]

The difference is a syringe with a removable needle and a syringe with a needle that cannot be removed. There is more waste in the syringe with the slip on/luer lock needles as opposed to the "insulin syringes".

False. My slip tip are zero waste

 

[CFH016]

False. My slip tip are zero waste

Ok, so you have some that are zero waste. That doesn't make what I said false.

 

[4Drago]

What's everyone's average wait time buying international for USA domestic reship?

 

[RiceNKimchi]

Wtf is this? Frugal Anabolics on A&E.

 

[RiceNKimchi]

What's everyone's average wait time buying international for USA domestic reship?

2 weeks give or take a few

 

[Rido]

And I will repaet what I said Rido...""but in the past, several years ago when I used them, I have used BD 25 gauge 1 inch 1 cc insulin syringes with necks / ends that looked like a normal 3 cc syringe on the end, like these"

If those are BD's then that is fine. But I have never seen or used BD insulin syringes with ends like those. Look inside the box and see if there are instructions for how much waste those have...whether they have .07 cc's, .10 cc's or no waste at all.

Insulin needles do not have "necks, they are 0 space needles.

You must be talking about a tuberculin or 1cc syringe with a needle. Which are different than slin pins

I also have never heard of a 25 gauge insulin syringe.

 

[4Drago]

2 weeks give or take a few

Well quess I'm not so lucky. I ordered before the Chinese holiday and it's been a little over a month. Not a big deal. I'm sure things got pretty backed up with everyone ordering before the holiday closure.

 

[SkankHunt]

If you’re worried about losing .0863 cc of oil when you inject you need to find a new hobby.

 

[DECLAN]

Wtf is this? Frugal Anabolics on A&E.

Recession dude. Jeez, while i see these guys trying to squeeze every drop of oil while I waste about 5-10ml every 90 ml brew in the filters because I don't want to spend another minute pushing plain oil into it because my forearms are throbbing from using syringe filters lol.