Qingdao Sigma Chemical Co., Ltd (International, US, EU, Canada and Australia domestic

[whodis?]

Thanks. I have only 5 vials of the rip blend and in my experience the pip is worst first couple of injections. I will see if I can find a way to manage the PIP, probably by decreasing the volume and trying every day injections.

It seems 300mg blends are too much for me.

I had the worst pip of my life using rip blend. Both glutes & both pecs were swollen, made doing anything in life a nightmare lol. I now mix 1:1 with sterile MCT oil. Never had pip since. Hope this helps

 

[TheCant]

I had the worst pip of my life using rip blend. Both glutes & both pecs were swollen, made doing anything in life a nightmare lol. I now mix 1:1 with sterile MCT oil. Never had pip since. Hope this helps

Thanks, that sounds like a solution.
I only home-brewed once years ago so what's the best way to sterilise the MCT? Heat it up in a beaker in the oven and then filter through syringe filter?

Would you mix the sterile MCT oil and the rip blend in another sterile vial?

 

[mochul]

Thanks, that sounds like a solution.
I only home-brewed once years ago so what's the best way to sterilise the MCT? Heat it up in a beaker in the oven and then filter through syringe filter?

Would you mix the sterile MCT oil and the rip blend in another sterile vial?

Don’t heat the oil. Just filter it using sterile syringe filter. If the vial has enough space you can just pour the mct in the vial with rip blend. Make sure you attach another needle to the vial to compensate the pressure build up

 

[JeffroCat]

I don't have a pastebin, and this should be e something obvious, and if they do it and get their orders unfullfilled and think I am scamming, then fuck them and fuck anyone who will support them, so single fuck will be given.

But you already don't give a fuck. You're a dishonest scumbag. And you're clearly too stupid to understand what @Zebedee is actually saying.

 

[mindgame1516]

Looks like I’m getting floaters in my test e. It seems more like the rubber from where the needle goes through is dropping pieces into the oil. I put labels on my bottles so when I have 4 open bottles I know what is what.

Wold this cause an infection if injected

 

[whodis?]

Thanks, that sounds like a solution.
I only home-brewed once years ago so what's the best way to sterilise the MCT? Heat it up in a beaker in the oven and then filter through syringe filter?

Would you mix the sterile MCT oil and the rip blend in another sterile vial?

I’m from Aus and just bought it online. It was $16 for 100ml

 

[whodis?]

Thanks, that sounds like a solution.
I only home-brewed once years ago so what's the best way to sterilise the MCT? Heat it up in a beaker in the oven and then filter through syringe filter?

Would you mix the sterile MCT oil and the rip blend in another sterile vial?

The MCT I get comes in a proper sealed vial with a rubber stopper so I just draw the MCT then the ripped, give it a good shake, warm it up a little and pin. 0 PIP

 

[mindgame1516]

@Qingdao Sigma Chemicals see 3 post above

 

[Country Club Hero]

I feel like a total nerd and noob. I was one of the OG users of QSC when they arrived on scene. But I have not ordered since the days we could pay via cc on Alibaba.

Now I have no idea how to order anymore and I’m actually a little intimidated to navigate it. It’s sad because that’s the same behavior you find from old guys afraid to learn to pay via bitcoin lol

 

[BrokenOne]

That’s your prerogative, but you need to state this clearly on your PasteBin / list. This post is very quickly going to get buried & people won’t be aware of this rule.

Failing to do that & not making everyone aware of this before ordering would effectively make you guilty of scamming.

Come on.... People need to have just a tiny bit of personal responsibility in life.... Who TF should need it explained to them that they should NOT be referencing drugs or drug suppliers in their BANK transactions!!

At that point, we long ago failed these people by protecting them previously and not allowing Darwinism to naturally sort the issue out by itself.

People doing this COSTS QSC.... You think these bank accounts are in QSC's name.... There is a cost to burning the service provider!

I'm with you as far as putting on the price list the warning, but I'll have zero sympathy for anyone who burns a bank account with listing what they are buying on the transaction, then comes here whining that they lost their $ and didn't receive their illegal drugs!

 

[BrokenOne]

I feel like a total nerd and noob. I was one of the OG users of QSC when they arrived on scene. But I have not ordered since the days we could pay via cc on Alibaba.

Now I have no idea how to order anymore and I’m actually a little intimidated to navigate it. It’s sad because that’s the same behavior you find from old guys afraid to learn to pay via bitcoin lol

Old guy here (I guess), don't be afraid of crypto, not hard to get your head around once you take a little time. Plus QSC have several other payment options.

Contact via the email address or WhatsApp, ask for newest list and it will have payment options on it.

 

[nightprowler7]

Anyone knows what oil is in the Ripped 300 blend? Colour seems dark than other rip blends I've seen/used. I injected in my glutes, left glute last Friday and right on the Sunday. The PIP is the worst I ever had, can't move in bed without a lot of pain. I've had bad PIP before but this is ridiculous.
Left glute is improving but right glute is still horrible.

I injected 0.8mls with 0.2mls of test each time, this is what I had been doing for weeks now with another "ripped blend" from another lab that sells here and that was totally fine, no PIP.
There was no change to my injection routine, wash, swab, inject with a 25g 1inch needle (1ml syringe), then usually shower.

Also compared to other labs QSC vials capping seem to be very bad, there are a number of vials for different AAS where the top comes out like the picture.
One vial I found tiny pieces of rubber floating in the oil.
I messaged QSC on whatsapp about it and they ignored it.

"The oil seems darker"

*posts picture of the cap*

 

[slpanico]

Come on.... People need to have just a tiny bit of personal responsibility in life.... Who TF should need it explained to them that they should NOT be referencing drugs or drug suppliers in their BANK transactions!!

At that point, we long ago failed these people by protecting them previously and not allowing Darwinism to naturally sort the issue out by itself.

People doing this COSTS QSC.... You think these bank accounts are in QSC's name.... There is a cost to burning the service provider!

I'm with you as far as putting on the price list the warning, but I'll have zero sympathy for anyone who burns a bank account with listing what they are buying on the transaction, then comes here whining that they lost their $ and didn't receive their illegal drugs!

Couldn't agree more...when you open up a server to the world of reditt an Facebook idiots, this is what happens. Always talking sources and delivery methods and then bitching that shipping from overseas takes to long.

 

[Qingdao Sigma Chemicals]

But you already don't give a fuck. You're a dishonest scumbag. And you're clearly too stupid to understand what @Zebedee is actually saying.

You felt offended, you must be one of those retarded dumb fucks who write in bank transfer : Jeffrey Pussy Cat order of tirzepatide to QSC.

 

[bighunanballs]

Looks like I’m getting floaters in my test e. It seems more like the rubber from where the needle goes through is dropping pieces into the oil. I put labels on my bottles so when I have 4 open bottles I know what is what.

Wold this cause an infection if injected

ya looks like bits of the stopper, just bulk filter all that shit into a 100ml or 500ml media bottle. its not a big deal. the cheaper chinese butyl breaks down easier and doesnt have the same give as more expensive grade stuff. as cheap as this stuff is its worthwhile investing in some tools of the trade if youre gonna partake in this way of life, sourcing cheap gear.

 

[mindgame1516]

I’ve hears ppl mention doing it from the source but I have not a clue about how to. So I wouldn’t mind investing into tools of the trade and doing a little bit of reading can you pm me where I can get stoppers and filter an such

 

[trengod1992]

@Qingdao Sigma Chemicals i emailed your team for a price list 2 days ago with no response, is their anyway you can pm me the list thanks

 

[bighunanballs]

I’ve hears ppl mention doing it from the source but I have not a clue about how to. So I wouldn’t mind investing into tools of the trade and doing a little bit of reading can you pm me where I can get stoppers and filter an such

its quite easy bud, build that google search capability up. look for some 100-500ml glass autoclavable media bottles (shouldnt be more than 5-10 bucks each) a 10 pack of lab grade butyl stoppers that fit the same diameter of your media bottle and crimp tops to fit that same media bottle. i rinse and drip dry my bottle and stopper with alcohol. some ppl like to autoclave or pressure cook their bottle/stopper. then start withrawing batches of oil and filtering through the syringe filter injecting into your now dry media bottles. once full place your stopper and hand crimp the top over the stopper. easy shit bro

 

[Laxbro88]

its quite easy bud, build that google search capability up. look for some 100-500ml glass autoclavable media bottles (shouldnt be more than 5-10 bucks each) a 10 pack of lab grade butyl stoppers that fit the same diameter of your media bottle and crimp tops to fit that same media bottle. i rinse and drip dry my bottle and stopper with alcohol. some ppl like to autoclave or pressure cook their bottle/stopper. then start withrawing batches of oil and filtering through the syringe filter injecting into your now dry media bottles. once full place your stopper and hand crimp the top over the stopper. easy shit bro

lol that is so much more complicated than it needs to be for the OP’s needs. he needs to just buy some sterile vials, syringe filters and 10mL syringes. Remove the oil from the contaminated vial, run through filter into sterile vial. So easy

 

[nightprowler7]

its quite easy bud, build that google search capability up. look for some 100-500ml glass autoclavable media bottles (shouldnt be more than 5-10 bucks each) a 10 pack of lab grade butyl stoppers that fit the same diameter of your media bottle and crimp tops to fit that same media bottle. i rinse and drip dry my bottle and stopper with alcohol. some ppl like to autoclave or pressure cook their bottle/stopper. then start withrawing batches of oil and filtering through the syringe filter injecting into your now dry media bottles. once full place your stopper and hand crimp the top over the stopper. easy shit bro

What lol. A kit is 100ml, you'll lose probably 10ml to syringe filtering and you're staying store 90ml in a media bottle?? Idk wtf you're talking about crimping a media bottle either lol. You can't put a multi use stopper onto a media bottle. And the ptfe "butyl" stoppers are about 4mm thick and hard plastic, they aren't made to by punctured multiple times. And they screw on, They don't crimp on. This whole process you suggested is about 4x more expensive and complicated than just buying sterile sealed vials and 2 syringe filters. Not to mention it makes no practical sense.