Qingdao Sigma Chemical Co., Ltd (International, US, EU, Canada and Australia domestic

Has anyone ran or tested their ripped blend lately. I seen old test but that was all I found and they were like a year or two old. And that last test of tren e was way underdosed at like 169 I believe, if anyone was thinking of buying it. This batch could be the same, could be different. Just a heads up for y’all.
 
Has anyone ran or tested their ripped blend lately. I seen old test but that was all I found and they were like a year or two old. And that last test of tren e was way underdosed at like 169 I believe, if anyone was thinking of buying it. This batch could be the same, could be different. Just a heads up for y’all.

most recent test I found was early this year:

 
Homebrewing is gatekept?
I sort of agree with the sentiment. While the information is readily available, the way some people go on about the NEED to setup clean rooms and some of the other over the top things for personal homebrewing, creates a barrier of entry for some people when starting out and they just don't proceed.

I'm all for cleanliness... But some people want to make it WAY more complex then it actually is.
 
I sort of agree with the sentiment. While the information is readily available, the way some people go on about the NEED to setup clean rooms and some of the other over the top things for personal homebrewing, creates a barrier of entry for some people when starting out and they just don't proceed.

I'm all for cleanliness... But some people want to make it WAY more complex then it actually is.
Caulk gun, syringe filter, syringe. Pre sterilized vials
 
I sort of agree with the sentiment. While the information is readily available, the way some people go on about the NEED to setup clean rooms and some of the other over the top things for personal homebrewing, creates a barrier of entry for some people when starting out and they just don't proceed.

I'm all for cleanliness... But some people want to make it WAY more complex then it actually is.
I don’t understand how someone can bar an adult from doing an activity they want to pursue?

The entry level to homebrewing is reading comprehension and research, if one is not able to grasp the concept; he is better off not engaging on the said activity for his own safety.

I am sure some of the people here have more complicated jobs and profession that require a higher degree of knowledge and skill to perform.
 
I sort of agree with the sentiment. While the information is readily available, the way some people go on about the NEED to setup clean rooms and some of the other over the top things for personal homebrewing, creates a barrier of entry for some people when starting out and they just don't proceed.

I'm all for cleanliness... But some people want to make it WAY more complex then it actually is.

Free will is a bitch eh?
 
I sort of agree with the sentiment. While the information is readily available, the way some people go on about the NEED to setup clean rooms and some of the other over the top things for personal homebrewing, creates a barrier of entry for some people when starting out and they just don't proceed.

I'm all for cleanliness... But some people want to make it WAY more complex then it actually is.

BRO: "Dude. why not just buy your gear from a reputable lab that regularly posts test results along with blind tests from customers? It's simple and cheap. You could even buy a couple kits and send a sample to Jano for comprehensive testing, and still be ahead, especially when you consider the equipment and your time...."

HOMEBREW BRO:: "Ugh! Are you kidding me?? How do I know they're doing things properly? Are they testing for bacteria or endotoxins? No way am I taking any chances with my health."

BRO: "Where do you send your raws and finished gear for testing?"

HOMEBREW BRO: "Lol what that's too expensive and unnecessary, I know what I'm doing."

BRO: "What about sterilizing your equipment? What do you use for that?"

HOMEBREW BRO: "I can see it's clean, so no need."

BRO: "What about your vials and stoppers? Do you autoclave them or use one of those $89 sterilizing ovens?"

HOMEBREW BRO: "Don't be stupid, I use these pre-sterilized vials."

BRO: "From Sigma Aldritch, or some other USP grade lab supply?"

HOMEBREW BRO: "Hahah, you're such a noob, I get them from Amazon, same place I get my 'Pharma grade' oils, BB, BA, and filters. Guaranteed 100% sterile. Duh."

BRO: "Then how do you know what you're making is any better??"

HOMEBREW BRO: "Do I look infected to you? Now I need to lay down, that last batch of Test-E gave me some wicked PIP. I really know how to brew some strong shit!"

IMG_8594.jpeg
 
BRO: "Dude. why not just buy your gear from a reputable lab that regularly posts test results along with blind tests from customers? It's simple and cheap. You could even buy a couple kits and send a sample to Jano for comprehensive testing, and still be ahead, especially when you consider the equipment and your time...."

HOMEBREW BRO:: "Ugh! Are you kidding me?? How do I know they're doing things properly? Are they testing for bacteria or endotoxins? No way am I taking any chances with my health."

BRO: "Where do you send your raws and finished gear for testing?"

HOMEBREW BRO: "Lol what that's too expensive and unnecessary, I know what I'm doing."

BRO: "What about sterilizing your equipment? What do you use for that?"

HOMEBREW BRO: "I can see it's clean, so no need."

BRO: "What about your vials and stoppers? Do you autoclave them or use one of those $89 sterilizing ovens?"

HOMEBREW BRO: "Don't be stupid, I use these pre-sterilized vials."

BRO: "From Sigma Aldritch, or some other USP grade lab supply?"

HOMEBREW BRO: "Hahah, you're such a noob, I get them from Amazon, same place I get my 'Pharma grade' oils, BB, BA, and filters. Guaranteed 100% sterile. Duh."

BRO: "Then how do you know what you're making is any better??"

HOMEBREW BRO: "Do I look infected to you? Now I need to lay down, that last batch of Test-E gave me some wicked PIP. I really know how to brew some strong shit!"
then you stand down there with your bro, wondering who will be the first to try it..
pump was good but the inflammation also :confused:
 
BRO: "Dude. why not just buy your gear from a reputable lab that regularly posts test results along with blind tests from customers? It's simple and cheap. You could even buy a couple kits and send a sample to Jano for comprehensive testing, and still be ahead, especially when you consider the equipment and your time...."

HOMEBREW BRO:: "Ugh! Are you kidding me?? How do I know they're doing things properly? Are they testing for bacteria or endotoxins? No way am I taking any chances with my health."

BRO: "Where do you send your raws and finished gear for testing?"

HOMEBREW BRO: "Lol what that's too expensive and unnecessary, I know what I'm doing."

BRO: "What about sterilizing your equipment? What do you use for that?"

HOMEBREW BRO: "I can see it's clean, so no need."

BRO: "What about your vials and stoppers? Do you autoclave them or use one of those $89 sterilizing ovens?"

HOMEBREW BRO: "Don't be stupid, I use these pre-sterilized vials."

BRO: "From Sigma Aldritch, or some other USP grade lab supply?"

HOMEBREW BRO: "Hahah, you're such a noob, I get them from Amazon, same place I get my 'Pharma grade' oils, BB, BA, and filters. Guaranteed 100% sterile. Duh."

BRO: "Then how do you know what you're making is any better??"

HOMEBREW BRO: "Do I look infected to you? Now I need to lay down, that last batch of Test-E gave me some wicked PIP. I really know how to brew some strong shit!"

View attachment 291068
Full of strawman arguments. Plenty of homebrewers buy USP grade sterilized vials from legit sources that are regulated by a government agency.

Many also test the sources of their products, and accuracy of what they make..
 
BRO: "Dude. why not just buy your gear from a reputable lab that regularly posts test results along with blind tests from customers? It's simple and cheap. You could even buy a couple kits and send a sample to Jano for comprehensive testing, and still be ahead, especially when you consider the equipment and your time...."

HOMEBREW BRO:: "Ugh! Are you kidding me?? How do I know they're doing things properly? Are they testing for bacteria or endotoxins? No way am I taking any chances with my health."

BRO: "Where do you send your raws and finished gear for testing?"

HOMEBREW BRO: "Lol what that's too expensive and unnecessary, I know what I'm doing."

BRO: "What about sterilizing your equipment? What do you use for that?"

HOMEBREW BRO: "I can see it's clean, so no need."

BRO: "What about your vials and stoppers? Do you autoclave them or use one of those $89 sterilizing ovens?"

HOMEBREW BRO: "Don't be stupid, I use these pre-sterilized vials."

BRO: "From Sigma Aldritch, or some other USP grade lab supply?"

HOMEBREW BRO: "Hahah, you're such a noob, I get them from Amazon, same place I get my 'Pharma grade' oils, BB, BA, and filters. Guaranteed 100% sterile. Duh."

BRO: "Then how do you know what you're making is any better??"

HOMEBREW BRO: "Do I look infected to you? Now I need to lay down, that last batch of Test-E gave me some wicked PIP. I really know how to brew some strong shit!"

View attachment 291068
Is that a handwritten "MESO 2024" sign next to the microwave?
 
Back
Top